Vmax R93 Carvee Bee Pro
20 km/h, 20 km, 350 W
Questions about Vmax R93 Carvee Bee Pro
What would you like to know?
0 questions and answers
Helpful answer
Unfortunately, I cannot help. On the web you can find many tips on how to replace a tyre. What I can say is that the VMAX Team Switzerland responds very quickly to enquiries and is sure to have a tip.
These characters are "Developer Options" P01 and P02 allow you to set a few things, I believe you can even set the kick start function or cruise control here. If you continue to P04, you can set the max. speed limit of 20 km/h. If you go on to P04, you can remove the maximum speed limit of 20 km/h! It initially says 20, but you can set this value to 25 and thus drive at 25 km/h. I don't know myself whether it goes further than 25, but I would be pleased if you could answer this and tell me whether more than 25 is possible. LG
Hallo, doch hier gibt es Zusatz Akku. siehe hier.
VMAX R93 Carvee Bee
Hello NinaHuehne
Thank you for your question.
The beep indicates that the cruise control function is active. You cannot switch this off, as the beep is supposed to indicate that you are driving with cruise control.
Kind regards
Team_VMAX
Hello Linkar
Thank you for your message.
The lines are the battery indicator. When you drive the scooter, the battery indicator decreases because you are draining the battery by driving. However, this scooter has built-in recuperation when you brake, which means that you recharge the battery by braking, which is why the battery indicator goes up again when you brake more.
Kind regards
Team_VMAX
The product is unfortunately on sale and can therefore no longer be offered by us.
Just call Vmax.
As far as I know, the options were only available in the older models that still had tubeless tyres. Now the speeds are limited to the options that are allowed in Europe.
Send back the error in the system or call Vmax. You can also have it checked in Rothrist at Vmax.
I can't answer your question, but if you're wondering whether to buy one or the other, I wouldn't advise it anyway. I have never bought a device that broke in so many places in such a short time.
Is there a way to reset the model because I've only had mine for 3 months and now it won't start...?
Remove the battery and check whether the rubber seal of the charging socket closes properly and the battery is fully charged (at the charger). It has already happened to me that no contact was possible. If this is OK, insert the battery and press both buttons together for a few seconds. Then the unit should go into programming mode. If it does not react: send it back, you still have warranty.
You should have received a valve attachment. It should work with that.
This problem should be tyre hard. Pump with air. About 2.6 bar pressure. There are mobile battery electric air pumps. Because of rolling resistance it should be better or the battery will run out quickly.
Helpful answer
Only about the scooter.
Hello Thomy44
I bought the spare tyres from the Xiaomi M365 and replaced them with the help of a two-wheel mechanic. The rear wheel can be removed completely. The front one is connected to a power cable. It cannot be placed completely on the ground. It is advisable to soak the new tyres in hot water to make it easier to pull them onto the wheels.
Helpful answer
I have 3 bar and drive well with it
I like my CarveeBee too. The bar on the display is divided. Every 5=100%, 4=80, 3=60, 2=40 and when the last part lights up it's time to charge.
What I would like to know is how high the tyre pressure should be for size 160 with 58kg.
you have to push the red lever down
Yes, it has a display. It shows how fast and battery level. It has no range.
30 of 101 questions