Best selling Multimeters from Voltcraft
On this page you’ll find a ranking of the best Multimeters from Voltcraft. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. Voltcraft VC292
The VC 292 can measure currents up to 60 A directly with the enclosed clamp adapter and, like all devices in the VC-200 series, is optimised for training. Measurement of high currents: The enclosed CLA-60 current clamp adapter is suitable for non-contact measurement of alternating currents up to 60 A. The distribution of 3-phase circuits can be determined quickly and reliably. The circuit does not need to be disconnected during the measurement. The Voltcraft VC-292 displays the exact measured value in amperes in the current clamp switch position, as the clamp and the multimeter are perfectly matched. Razor-sharp display: Impressive, clearly legible EBTN display in bright surroundings as well as in the dark. With a 7.9 cm (3.1 inch) display diagonal, all digits and symbols are shown in a much larger size, thus avoiding reading errors. Test socket monitoring: The correct assignment of the test sockets is shown on the display depending on the selected measurement parameter. This is a great help for beginners and students to avoid operating errors. If an incorrect connection is made despite the display, a warning tone sounds. Safety when changing batteries: The housing must be opened to change batteries or fuses. For safety reasons, the test leads should not be connected. In contrast to simple conventional devices, this meter is designed so that the housing cannot be opened while the test leads are connected. Test leads can only be reconnected after the housing has been closed, as the test sockets are mechanically locked. Safety due to wear indicator: The measuring cable is double insulated in two colours. If the first layer of insulation is damaged, a different coloured insulation appears. Ideal for training devices to replace worn test leads at an early stage.
2. Voltcraft Rotary field direction tester
Testing device for determining and checking the phase sequence in three-phase power systems. Simultaneous display of the existing phases. Reliable contact via 4 mm spring cage plug.
3. Voltcraft Insulation tester ET-100 125
Measure insulation resistances up to a maximum of 4000 MΩ with test voltages of 125/250/500/1000 V. Additionally, the ET-100 offers measurement functions for DC and AC voltages up to a maximum of 1000 V/DC and 750 V/AC in CAT III, as well as for resistances up to 400 Ω. The included shoulder bag allows for comfortable operation of the device, as the ET-100 does not need to be held in hand during measurements. The molded soft rubber protection ensures that the device is ideally protected.
4. Voltcraft Two-pole voltage tester
The two-pole voltage tester is constructed and tested according to EN 61243-3/VDE0682. Voltage indication is provided through bright LEDs, which are divided into ranges from 12 to 690 V, and the actual effective value is additionally displayed on the LCD screen.
5. Voltcraft VC272
The VC 272 can measure temperatures with K-type thermocouples and, like all devices in the VC-200 series, is optimised for training. Razor-sharp display: Impressive, clearly legible EBTN display in bright surroundings as well as in the dark. With a 7.9 cm (3.1 inch) display diagonal, all digits and symbols are shown in a much larger size, which prevents reading errors. Test socket monitoring: The correct assignment of the test sockets is shown on the display depending on the selected measured variable. This is a great help for beginners and students to avoid operating errors. If an incorrect connection is made despite the display, a warning tone sounds. Safety when changing batteries: The housing must be opened to change batteries or fuses. For safety reasons, the test leads should not be connected. This meter is designed so that the housing cannot be opened while the test leads are connected. Test leads can only be reconnected after the housing has been closed, as the test sockets are mechanically locked. Safety thanks to wear indicator: The measuring cable is double insulated in two colours. If the first layer of insulation is damaged, a different coloured insulation appears. Ideal for training devices to replace worn test leads at an early stage. Self-resetting fuse: This device has a self-resetting fuse for the measuring range up to 600 mA. There is no need to change expensive high-capacity fuses with this version, which is particularly advantageous for training purposes. Double safety: If the multimeter is nevertheless connected to a high-energy power supply in the µA and mA range, an additional glass tube fuse is triggered to protect the self-resetting fuse against flashover.
6. Voltcraft Digital Oszilloskop 3 in 1
Three measuring devices in one. The Voltcraft 3-in-1 digital oscilloscope has it all in the truest sense of the word.
Function 1: Digital oscilloscope
As an oscilloscope, the DSO-2072H has two channels with a maximum bandwidth of 70 MHz, a maximum sampling rate of 250 MS/s and 8K recording length. The vertical resolution is 8-bit.
Function 2: Multimeter
The multimeter can be used in the CATII 1000 V measurement category for voltage, current, resistance, capacitance, continuity and diode function measurements. The auto function simplifies work processes and TRMS ensures reliable measured values. The display has 20,000 digits.
Function 3: Waveform generator
The waveform generator has one channel with a maximum frequency output of 25 MHz and a maximum sampling rate of 125 MS/s. A frequency resolution of 0.1 Hz, 14-bit vertical resolution and a waveform length of 8K allow reliable operation.
Adequate accessories
The DSO-2072H comes with a probe with adjustment tool, a cable from BNC connector to crocodile clip, a pair of black and red multimeter test leads, a USB cable, a quick start guide and a protective soft case. The enclosed CD contains software and an English operating manual.
7. Voltcraft VC-523
For easy and quick measurement of direct and alternating currents up to 400 A, the circuit does not need to be interrupted during measurement, unlike with multimeters. This device is perfectly suited for servicing machines in control cabinets and for measuring high currents in automotive and truck electrical systems.
Multimeter functions: The device features voltage, frequency, temperature, capacitance, and resistance measurement functions with automatic range selection, as well as diode testing, True RMS, and an acoustic continuity tester. Additionally, the device is equipped with non-contact voltage testing (NCV).
The high-contrast display with 4000 counts is exceptionally easy to read in all lighting conditions. Especially in poorly lit control cabinets, this model outperforms conventional clamp meters. The display shows 4-digit values up to 3999, regardless of the position of the decimal point.
The hold button is perfectly reachable with the thumb and is used to save readings when the display cannot be viewed during measurement. This button is ergonomically positioned for the thumb and does not need to be searched for, as is often the case with conventional clamps.
If needed, a bright LED with optics can be activated to illuminate the area directly in front of the clamp. The VOLTCRAFT VC-523 always maintains a non-slip contact with the surface. Unintentional slipping on uneven surfaces is effectively prevented by the rubber coating.
Thanks to the 2-component housing with integrated soft rubber protection, the measuring device is also suitable for tough applications. The rubberized housing shell makes the measuring device very easy to grip. A standard thread for connection to safety holders or belt systems is integrated into the housing.
8. Voltcraft VC-331 SE
The VC-331 SE (Special Edition) is available in a limited edition while supplies last. It is 100% identical to the standard model VC-331 and is the direct successor to the successful VC-330. With improved accuracy, enhanced display, a non-slip housing, an additional temperature measurement function, and the ability to measure Min/Max as well as Zero Reset for DC measurements. The ergonomically shaped, robust housing allows for one-handed operation. The numerous measurement functions make this clamp meter a true multi-talent. It is suitable for easy and quick measurement of both AC and DC currents up to 200 A. Unlike multimeters, the circuit does not need to be interrupted during measurement. Perfect for servicing machines in control cabinets and measuring high currents in automotive and truck electrical systems. The high-contrast display with 2000 counts and the exceptionally readable EBTN display are optimal in all lighting conditions.
9. Voltcraft PM-41
This product is a USB tester designed to test and measure the performance of various USB devices (e.g., USB chargers, power banks, cables, and other USB devices). The product can display measurements for voltage, current, capacity, energy, and the equivalent resistance of the circuit. For power and current measurement, a USB load must be connected to this model.
10. Voltcraft VC915 Hand-Multimeter digital CAT III 1000 V, CAT IV 1000 V Anzeige
The Voltcraft Handheld Multimeter VC915 is a robust multimeter for a variety of measurement tasks. The device features auto/manual range selection and can measure both DC and AC voltages as well as DC and AC currents.
Multimeter
CHF297.95
Voltcraft VC915 Hand-Multimeter digital CAT III 1000 V, CAT IV 1000 V Anzeige
CAT III 1000V, CAT IV 1000V