Seagate IronWolf
10 TB, 3.5"
Questions about Seagate IronWolf
What would you like to know?
0 questions and answers
Helpful answer
Hello Johnny We are converting them to 3 years, thanks for the tip :) Kind regards
Helpful answer
The manufacturer means something like 1'000'000h MTBF https://www.seagate.com/www-content/datasheets/pdfs/ironwolf-16tb-DS1904-14-1907US-en_CA.pdf
I can activate the write cache and by default it is also active ¯\_(ツ)_/¯
75,000 MB/s corresponds to 75 GB/s. No hard disk in the world can do that. You always have to distinguish between internal and external transfer rates. The external one is limiting here: 6 Gb/s (SATA III), which corresponds to 0.75 GB/s. This is the absolute maximum you can expect from the hard disk. From experience I can tell you that with a 'normal mix' of files over 10 min you will reach a maximum of about 23 GB/min. However, I am very satisfied with the hard drives in my NAS. However, they are not intended for a workstation or a gaming computer. There are other, more suitable products, mostly in 2.5" format or - better - SSD (NVMe).
Helpful answer
I've purchased this a little less than one month ago from Digitec and the one I received is the VN001 model.
Helpful answer
The ST6000VN001 is included in the following: https://www.seagate.com/www-content/datasheets/pdfs/ironwolf-16tb-DS1904-16-2005DE-de_DE.pdf and is listed on the page https://www.seagate.com/de/de/internal-hard-drives/hdd/ironwolf/#specs
If it fits in the housing, then yes.
Most promotions are basically limited to a certain quantity, even if this is not obviously shown on the product page.
Helpful answer
In principle, there is nothing to be said against it. However, NAS hard drives are designed for continuous operation. This means they run with lower revolutions, which is easier on them and advantageous from a heat point of view (the power consumption is also somewhat lower). The disadvantage of the lower rotations is that you have clear performance losses. So if you only want to use them as data storage, why not. But if you want to use it as system storage, I recommend a desktop hard drive or, if possible, an SSD.
Helpful answer
Hi. You can find the Manufacturer No. by the specifications. It is ST10000VN0004 - and also listed as compatible for the tvs-671 by QNAP: https://www.qnap.com/en-us/compatibility/?model=159&category=1
should be able to be exchanged immediately. had the same with my sshd, could no longer load a game, was promptly exchanged.
Helpful answer
If there is a free Sata port then yes. What is not possible/recommended is to install the operating system on it.
Helpful answer
http://knowledge.seagate.com/articles/en_US/FAQ/172191en?language=de-de
Helpful answer
https://www.synology.com/de-de/compatibility?search_by=products&model=RS3413xs%2B&category=hdds&filter_brand=Seagate&p=1 Is not in the list of compatibility of Synology ;-(( However, bet my left arm that it runs with the disk. I have a DS1817+ with 8x8 TB + DX517 with 5x6TB all WD RED and DS1815+ 8x6TB WD RED Pro and DX513 with Seagate Baracuda 5x4TB Am away from QNAP and completely happy with Synology - Greets r00tli2k
Probably an error. This is probably the standard information when a product page is created.
The 5D supports up to 10TB disks (https://myproducts.drobo.com/article/aa-01124), but no SMR disks are supported, but this one is not an SMR disk according to the data sheet and should therefore run in a 5D.
Good day As long as you install some of the same type and size, this should not be a problem.
For me, it's photos from many years ago, and there's still space! Works wonderfully.
Helpful answer
"Cheating" is relative. Windows simply does not calculate directly with the power of 10 of Giga, but with another. To explain it would probably go beyond the scope of this article. Effectively, you should get 950000 DISPLAYED here. I would like to point out that this is a NAS HDD, which was not made for PC use.
25 of 25 questions