Best selling Charge controllers
This page always stays fresh and updates automatically.
1. Victron Energy SmartSolar 100/30 MPPT
The Victron SmartSolar 100/30 MPPT Solar Charge Controller 12V/24V Battery is suitable for solar panels with a total power of up to 440 W (at 12V) or 880 W (at 24V). The charge controller can be easily configured and monitored via Bluetooth using an app. The ultra-fast Maximum Power Point Tracking (MPPT) significantly improves the yield from the solar cells, especially in overcast conditions. The built-in BatteryLife algorithm ensures optimal battery charging, even when the battery cannot be fully charged during a charging cycle, for example, due to shading or darkness preventing the solar panel from delivering charging power.
What our customers think
Pro
- App for configuration and current values
- Individually configurable (Bluetooth version)
- with app for comprehensive measured values (Bluetooth version)
2. Victron Energy SmartSolar MPPT 75/15
Solar charge controller with ultra-fast Maximum Power Point Tracking (MPPT). Detection of the Maximum Power Point even in partial shading. Load output and flexible charging algorithms. Overheating protection and load reduction at high temperatures. Automatic battery voltage detection and intelligent battery management through load shedding. Maximized efficiency. By continuously monitoring the voltage and current output of your solar panels, the technology of the BlueSolar MPPT ensures that all available energy is extracted from the modules and stored. The advantage is particularly noticeable in partially cloudy skies and varying light intensity.
Remote control via Bluetooth or the Internet. You can remotely control and monitor the extensive functions of your BlueSolar MPPT charger and pair it with your smartphone or another device via VictronConnect. If your system is connected to the Victron Remote Management Internet portal, you have full access to your MPPT anytime and anywhere. Both services are available free of charge.
Prevention of damage and excessive discharge. The intelligent load output prevents damage caused by using empty batteries. You can configure the voltage at which the BlueSolar charge controller disconnects a load to prevent excessive discharge of your batteries. The device attempts to recharge the battery to 100% every day. If this is not possible due to bad weather, it raises the voltage threshold for disconnection daily until it is successful.
What our customers think
Pro
- Controllable via Bluetooth
- Statistics via Bluetooth
- Simple operation and setting via Victron app
3. Victron Energy Cerbo GX MK2
This completely new communication hub allows you to have perfect control over your system, no matter where you are, and maximizes its performance. Simply connect via the Victron Remote Management (VRM) portal or access a MFD or the VictronConnect app directly through the separate GX Touch, thanks to the additional Bluetooth capability. This latest addition to the GX series combines the best in connectivity and redefines smart power solutions in every way. Technical specifications: 2 VE.Bus, 3 VE.Direct, 3 USB, HDMI, 2x 2 Ve.CAN (CAN BMS capable isolated), MicroSD, 2 WIFI, LAN, 4 digital, 4 tank, 4 temperature inputs, 2 relays, customized RJ45 ports.
4. Victron Energy SmartSolar MPPT
A solar charger is powered by solar modules and stores this energy in batteries. Using the fastest technology, the SmartSolar maximizes this energy collection and directs it intelligently to fully charge the batteries in the shortest time possible. The SmartSolar maintains the functionality of the battery, thereby extending its lifespan. The SmartSolar charge controller can even recharge a deeply discharged battery. It can operate with a battery voltage as low as 0 volts, provided that the cells are not permanently sulfated or otherwise damaged.
What our customers think
Pro
- Everything visible in the app
- Simple installation
5. Victron Energy GlobalLink 520
We believe that insight into your installation is a key factor for the maintenance and operation of your off-grid energy solutions. Off-grid should not mean offline, which is why we developed the GlobalLink 520. This device provides 4G-LTE-M connectivity to all VE.Direct-enabled devices for the first five years, without any monthly fees or subscriptions.
Easy system monitoring and control: The GlobalLink 520 is equipped with two VE.Direct interfaces, two digital inputs, and one relay output, creating a data connection to the VRM portal from Victron Energy.
Technical specifications:
- Victron number: ASS030543020
- Communication channel: 4G/LTE-M
- Number of VE.Direct inputs: 2
- Number of digital inputs: 2
- Number of relay outputs: 1
- SIM card: Integrated
- Weight: 0.2 kg
The two VE.Direct inputs are compatible with:
- All MPPT Solar Charge Controllers with VE.Direct port
- BMV Battery Monitor 700 Series
- BMV Battery Monitor 710 Smart Series
- Phoenix Inverter VE.Direct models
- SmartShunt
- IP43 Chargers
Not compatible with the Li-Ion batteries Peak Power Pack.
6. Victron Energy SmartSolar MPPT 150/45
The Victron Energy SmartSolar MPPT 150/45 is a highly advanced charge controller specifically designed for the efficient use of solar energy. With an input voltage of up to 150 V and a nominal voltage of 48 V, this controller enables optimal energy conversion and storage. The MPPT (Maximum Power Point Tracking) technology ensures that maximum energy is extracted from the solar PV modules, even under varying light conditions. The SmartSolar is capable of recharging deeply discharged batteries, making it a reliable choice for various applications. Additionally, the integrated Bluetooth support allows for remote monitoring and control of the charge controller, ensuring user-friendly operation. Weighing only 1.25 kg and featuring a compact design, the SmartSolar MPPT 150/45 is suitable for both stationary and mobile applications.
- MPPT technology for maximum energy yield
- Ability to recharge deeply discharged batteries
- Integrated Bluetooth for remote monitoring and control
- Protection features against reverse polarity and short circuits
- Robust construction with an IP43 protection rating.
7. Victron Energy Charge controller SmartSolar MPPT 100/20
A solar charger is supplied with energy via solar modules and then stores it in batteries. Using the latest and fastest technology, the SmartSolar maximises this energy production and intelligently directs it to fully charge the batteries in as short a time as possible. The SmartSolar maintains the functionality of the battery and thus extends its service life. The SmartSolar charge controller even recharges a heavily discharged battery. It can operate with a battery voltage as low as 0 volts, provided the cells are not permanently sulphated or otherwise damaged. Safety instructions: Models: 12/24/48 volts
What our customers think
Pro
- Compatible via app and with other devices of the same brand
- Top device with Bluetooth
- Very positive
Contra
- Bluetooth range weak
- Cable clamps too small
8. Ective SC 40 Pro
With the SC PRO charge controllers, you can charge all common battery types - from AGM and GEL to lithium - efficiently and reliably with solar energy. Thanks to Bluetooth, you can also make all the controller settings conveniently via app. The rear has been further optimised in the second generation: The cooling fins enable even more efficient, fanless cooling - perfect for quiet use on the move. Practical: Even locked lithium battery Management systems are automatically reactivated when charging.
9. Victron Energy BlueSolar MPPT 150/45
MPPT controller with an efficiency of over 98%. Fast MPPT controller for maximum energy yield. Fully programmable charging algorithm. Protection against overheating and short circuits. The algorithm maximizes energy output. Rated PV power, 12 V: 650 W. Rated PV power, 48 V: 2600 W. Especially in overcast conditions, when light intensity is constantly changing, an extremely fast MPPT controller can improve energy yield by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. In the case of partial shading, there may be two or more maximum power points on the current-voltage curve. Conventional MPPTs tend to lock onto a local maximum power point, which may not be the optimal point. The device's innovative algorithm maximizes energy yield by locking onto the optimal maximum power point. Fully programmable charging algorithm as well as eight pre-programmed algorithms that can be selected via a rotary knob. Overheating protection and load reduction at high temperatures. Protection against PV short circuits and PV reverse polarity. PV backflow protection.
10. Victron Energy Charge controller SmartSolar MPPT 150/35
SmartSolar MPPT 150/35 & 150/45 A solar charger collects energy from your solar panels and stores it in your batteries. SmartSolar uses the latest, fastest technology and maximises this energy harvest by driving it intelligently to achieve a full charge in the shortest possible time. SmartSolar maintains battery health and extends their life. The SmartSolar charge controller even recharges a heavily discharged battery. It can be operated with a battery voltage of up to 0 volts, provided the cells are not permanently sulphated or otherwise damaged. The SmartSolar charge controller even recharges a heavily discharged battery. It can be operated with a battery voltage of up to 0 volts, provided the cells are not permanently sulphated or otherwise damaged. MPPT: Ultra Fast Maximum Power Point Tracking By constantly monitoring the voltage and current output of your solar panels (PV), MPPT technology ensures that every drop of available energy is flushed from your panels and harvested for storage. The benefit is most evident when the sky is partly cloudy and the light intensity is constantly changing. Remote monitoring and control Remotely control and monitor the extensive functions of your SmartSolar MPPT charger with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal provides access to the full power of your MPPT anytime, anywhere. Both VictronConnect and VRM can be used free of charge. For remote installations - even if there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520.
Product order
See all products