Multimeter
CHF291.64
Metrix Hand multimeter analog MX1 Cal
CAT II 1000V, CAT III 600V, Handheld multimeter
Best selling Multimeters from Metrix
This page always stays fresh and updates automatically.
1. Metrix Hand multimeter analog MX1 Cal
Shock-resistant and splash-proof analog multimeter for any environmental condition with extensive protective features. The MX series features an LED display in case of a blown fuse. External voltages during resistance measurements are indicated by an acoustic signal. All measurement ranges are protected against overload by fuses or electronic devices.
2. Metrix Bench multimeter For your laboratory applications simple and efficient
The multimeters have all the measurement functions necessary in electronics: DC currents, resistances, frequencies, voltage peak values, RMS values, and more. With a bandwidth of 100 kHz, the smallest measuring range of 60 mV, and a resolution down to µV on the MX 5060, the multimeters offer high measurement accuracy in all types of measurements, comparable to portable VDC multimeters with 0.05% accuracy. The large measuring ranges and numerous combination possibilities make the instruments extremely versatile and suitable for various applications in electrical engineering and on speed controllers.
Multimeter
CHF569.74
Metrix Bench multimeter For your laboratory applications simple and efficient
CAT III 1000V, Oscilloscope
3. Metrix Current clamp MX 355
The compact and ergonomic model MX 355 is specially designed for applications on smaller electrical installations with currents up to 400 A, such as apartments, small craft, or commercial enterprises. With the MX 355, DC currents can also be measured with automatic zero balancing, allowing for differential measurements of currents, voltages, and resistances.
4. Metrix Current clamp MX 350
The Metrix multimeters are equipped with all the functions of a clamp meter and a full-fledged multimeter. They are the ideal tools for every electrician and electrical technician. The compact and ergonomic model MX 350 is especially designed for applications in smaller electrical installations with currents up to 400 A, such as homes, small craft, or commercial enterprises.
5. Metrix MTX 3297Ex Hand-held multimeter digital Ex-protected CAT III 1000 V, CAT IV 6
The MTX 3297Ex is a digital multimeter that complies with the current European ATEX directive 2014/34/EU. It meets the requirements for use in industries such as oil, chemicals, pharmaceuticals, cosmetics, and mining. The device is suitable for electrical maintenance and allows for testing and troubleshooting both inside and outside all explosive atmospheres, without compromising on compliance or measurement performance. The MTX 3297Ex can be used outside of ATEX zones and in all industrial sectors, is highly networkable, and offers optimal performance for the industry. Measurement data can be saved on a PC using the SX-DMM software, which can be downloaded for free.
Measurements:
- Voltage
- Current
- Resistance (continuity, semiconductor junction)
- Capacitance
- Frequency (duty cycle / pulse width)
- Temperature
- AC/DC current measurement with clamp with selectable conversion ratio
Functions:
Specific measurement functions:
- AC voltage with low impedance VLowZ in the presence of stray voltages
- Low-pass filter for PWM signal measurement
Analysis and diagnostic functions:
- MIN, MAX, Peak+, Peak-
- Difference ΔX and relative measurement ΔX/X
- Duty cycle and pulse width
Additional advantages:
- Designed and manufactured in France
- 3-year warranty.
Multimeter
CHF1714.94
Metrix MTX 3297Ex Hand-held multimeter digital Ex-protected CAT III 1000 V, CAT IV 6
CAT III 1000V, CAT IV 600V, Handheld multimeter
6. Metrix Mh
The display on the oscilloscope simplifies the interpretation of electrical signals: waveform, distortion level, peaks, effective value, and more are immediately visible. Using a safety-isolated current clamp with voltage output via BNC connector ensures optimal safety during the shortest measurement times, eliminating the need to break the circuit and requiring no protective isolation of the oscilloscope.
7. Metrix Differential probe touch
The active differential probe expands any oscilloscope with a differential input for safely measuring signals at floating potential. It features a switch for the division ratio.
8. Metrix OX 9062 Digital oscilloscope 60 MHz 2-channel 2.5 GSa/s 100 kpts 12 Bit Dig
The OX 9062 is a portable, battery-operated digital oscilloscope from the SCOPIX IV series of the Tablet-Icons generation, featuring 2 fully isolated channels up to 600 V and a bandwidth of 60 MHz. The memory depth in each channel is 100 k points, allowing for very long signal recordings.
The 7 WVGA TFT color touchscreen is illuminated against a black background, ensuring excellent readability. The operating menus are available in 13 languages, and the keypad and housing design of the SCOPIX IV are optimized for user comfort.
The two-channel digital oscilloscope OX 9062 with 60 MHz, like the entire SCOPIX IV series, offers an impressive range of functions while requiring minimal space. The 12-bit A/D converter ensures a vertical resolution of 0.025%. In addition to its advanced triggering functions (pulse width, event counting, delay), the SCOPIX IV provides 20 automatic measurements per channel as well as cursor measurements for comprehensive signal analysis.
The oscilloscope features standard and advanced MATH functions, allowing a mathematical function to be set for each curve, as well as scaling on the vertical axis in the respective physical unit. Thanks to the simultaneous real-time FFT analysis function for both waveforms, along with a qualitative harmonic analysis, signal distortions, pulse response time, and noise sources in logic circuits can be quickly and easily identified, making troubleshooting precise and efficient.
With the multi-channel digital TRMS multimeter, amplitudes, resistances, continuity, capacitance, frequency, and temperatures can be measured up to 200 kHz with 8000 digits, without needing to switch the PROBIX probes. Component testing is also possible. In multimeter mode, the recorder or data logger function is available as well.
Multimeter
CHF2907.89
Metrix OX 9062 Digital oscilloscope 60 MHz 2-channel 2.5 GSa/s 100 kpts 12 Bit Dig
CAT II 1000V, CAT III 600V, Oscilloscope
9. Metrix Hand Multimeter digital MTX203
With an operating temperature range of -20 °C to +55 °C, an IP54 protection rating, and double insulation, the devices can be used even under challenging conditions. The MTX 202 and MTX 203 meet all the requirements of electrical craftsmen for standard measurements (voltage, current, resistance).
Designed for daily use, the device fits comfortably in the hand and can be easily stored in a toolbox, making it readily available for electricians on-site.
With the MTX 202 and MTX 203, installers and maintenance technicians can also measure temperatures. The included temperature probe with a K-type thermocouple allows for monitoring heating systems, for example.
Maintenance work on electrical systems in office or commercial buildings is particularly simplified by the low impedance voltage measurement (VLowZ), as it reliably suppresses phantom voltages, which are often present in computer networks.
Troubleshooting electronic components is also conveniently possible through measurements of resistance, capacitance, diode testing, and more.
Thanks to their ease of use, the MTX 202 & MTX 203 are particularly appealing to maintenance technicians, enabling them to quickly identify faulty components or connections.
User safety is guaranteed in every case by the NCV function, which indicates the presence of dangerous voltages non-contact through a color change on the display. This allows for the easy localization of 230 V mains voltage-carrying cables.
10. Metrix Hand Multimeter MTX3291 Calibr
Strengths: Large illuminated LC display measuring 7 x 52 mm for simultaneous display of multiple parameters. Analysis functions: REL monitoring function with timestamp, PEAK + / and versatile additional features. Illuminated control buttons. Optimized user-friendliness: sealed housing IP67, safety sockets IEC 61-1-1 V CAT III/6 V CAT IV, power supply via battery or Ni-MH rechargeable battery (with external charger), contextual connection display on the screen. Advanced multimeter with additional measurement functions in the selected measurement mode: relative measurements or direct current measurements with clamp current transformer (with mV output), adjustable transformer ratios. USB networking via included SX-DMM software and SCPI programming commands. Description ASYC IV MTX 3291 - The new benchmark for multimeters. The portable digital multimeters enable direct measurement of the most important electrical quantities. They feature an innovative design and are compact, robust, waterproof, and ergonomic. Simple multimeter with LCD display 70 x 52 mm with very good readability. Contextual display of connection terminals on the screen. Automatic range selection for current, 1 single socket up to 10 A. Auxiliary measurements complementing the main measurement to simplify analysis. Monitoring: MIN/MAX and AVG data with relative time recording, voltage and current peaks. SX-DMM software for real-time data processing on a PC. And much more... IP67, splash-proof and dust-proof, perfectly suited for outdoor use. Power supply via 4 standard AA batteries or 4 rechargeable Ni-MH batteries HX0051B (optional) via external module. Autonomy of up to 400 hours in battery operation.
Multimeter
CHF551.45
Metrix Hand Multimeter MTX3291 Calibr
CAT III 1000V, CAT IV 600V, Handheld multimeter
Product order
See all products