CHF98.–
Goal Zero Nomad 10
10 W, 0.51 kg
Questions about Goal Zero Nomad 10
What would you like to know?
0 questions and answers
Former employee
3 years ago
Due to different purchasing conditions and changing suppliers over a certain period of time, price changes/fluctuations may occur. We generally work with daily prices.
Hello, there is no charge controller included. It is a 100 W solar panel with an 8 mm plug and an additional USB connection socket for charging mobile devices. LG
The panel does not have a stand.
Hello Kersvol. If the sun is shining with a cloudless sky (no veil clouds either) and there are a few hours, the following power banks can be charged with two solar panels (40W) hung together:
- Goal Zero Sherpa 100PD (via USB-C)
- Goal Zero Sherpa 100AC (via USB-C or 8mm connector)
- Xtorm Power bank Titan (via USB-C)
Information on approximate charging times can be found at Goal Zero https://www.goalzero.com/products....
Former employee
5 years ago
Helpful answer
We do not yet have any definitive information on the expansion of the product range. However, it is quite possible that the existing range will be supplemented with the products mentioned in the future.
No, the only thing it has are the fabric "eyelets" from which you could hang it up.
We work with different suppliers and daily prices. For this reason, the price of an item may be adjusted upwards or downwards over time.
We don't understand what question you have about this product. You are welcome to enter it again in more detail.
At least my version only has a USB-A direct connection.
Helpful answer
Of course, various factors always play a role. Angle to the sun (width and height), shading, etc.
In the best case it is possible.
I calculate approx. 80% output....
I have the panel on the car when stationary. However, I always turn it a little towards the sun! :-)
Unfortunately, I can't help you any further. You need a power brain ;-) I am more of a wood brain.
Helpful answer
In principle, yes and no: The connector plug of the Goal Zero Nomad 50 is a round plug that works excellently with its own power stations, but not directly with others (such as the EcoFlow via XT60). From the panel and the power: rather yes, therefore from the connector: no (unless you want to cut and tinker). LG
As Yuki25 wrote, it works:
Goal Zero Sherpa 100PD (via USB-C)
Goal Zero Sherpa 100AC (via USB-C or 8mm connector)
The 8mm cable is included (see pictures of the product) and it also has a USB-C connector. It does not come with a case. I do not know if there is one.
Yes, no problem, inside is extra cable usb-usb C
If we refer to the manufacturer's datasheet, it seems that 20W is potentially achievable only via the 8mm port. As for the USB port, it would seem to be 10.5W max.
Helpful answer
No. The panel is intended to be attached to the Goal Zero memory. It may be possible to connect it to another ANDERSON connector, but I have not tried it. I have the Goal Zero Yeti 1500 in combination with the panel.
No. The panel is foldable and holds together with Velcro.
Helpful answer
Yes that works
Good morning suihuerta. If you can charge the omni 20+ via a USB cable, then that works. I have the Nomad 100 and it has a USB direct connection. According to the description, this is also the case with the Nomad 50. Best regards.
It has both and runs from daylight to dusk even without direct sun - great!!!
Helpful answer
Have a look at the manufacturer's specifications under Tech Specs >> Ports
https://www.goalzero.com/shop...
Hello. The Nomad 100 is covered with a kind of Cordura (fabric) material. Personally, I would advise against this. Perhaps the Boulder is better suited for fixed outdoor mounting.
Thank you very much for your comment. A possible correction will be checked internally.
Yes, it can output power via USB.
As far as I remember, the panel and a cable.
The Nomad 5 is strong enough to survive without a protective cover, otherwise you could put a laptop sleeve over it... Mine came into contact with a stone floor and has no scratches and nothing...
Helpful answer
That depends on your config the Nomad 50 already has USB outputs via which you could already charge devices. The panel generates a maximum of 50W, but in reality it's probably more like 25-35 because there are clouds and we're not at the equator ;)
If you're talking about the Sherpa 100 PD, plug the Sherpa back into the Nomad's USB connector. Check out the Sherpa 100 AC where you can connect the panel to the 8mm solar connector so you don't lose power to the USB.
At the other end, what is important is the output power of the Sherpa, since you are connecting the notebook. The Sherpa has 60W output, so in your case your notebook would be charged with the maximum power.
30 of 40 questions