Hello NEEdLzZz,
No, currently only the US and CA versions have AirSense (ADS-B) support. This is because it is otherwise forbidden to fly drones in the US and CA. When the AirSense version will hit us is still in the stars.
- Rockero
Yes, that is correct.
The current Swiss drone regulations require an insurance coverage of at least 1 million Swiss francs to operate drones weighting more than 500g.
Under the following link the most important regulations are summarized (official englisch page):
https://www.bazl.admin.ch/bazl/en/home/good-to-know/drones-and-aircraft-models/allgemeine-fragen-zu-drohnen.html
A corresponding insurance is normally not expensive and if you already have a "personal liability insurance", it might already offer the required coverage for drones (and other model aircrafts and similar elements).
It is worth checking with you current insurance to see if you are already covered and if so, have your insurance issue you a corresponding confirmation, as the regulation requires you to have that confirmation on you when you fly in an outside area.
The mavic 2 air would not be allowed on the yellow and magenta zones, and allowed under 150m on blue zones(, unless that means the maximum theoretical possible height, in this case the answer might be no). In any case, you need a one million franc insurance, and be outside the red DABS zones, and have a VLOS.
Drones under 500g have only the yellow and red DABS zone restrictions + VLOS
It is an Air and not a Pro version.
The 2 Pro has a 20MP 1 inch sensor, the Air only a 12MP 1/2 inch CMOS sensor.
With the 2 Pro it is possible to film in Dlog-M.
The Air 2 can only do D-Cinelike.
Licence and course required? No. You can find restricted zones here: https://www.bazl.admin.ch/bazl/de/home/gutzuwissen/drohnen-und-flugmodelle/drohnenkarte.html
From 500g drone weight you need an insurance: https://drohnen-camp.de/drohnen-gesetze-in-schweiz/
Requires Android 6.0 or higher.
All Samsung Galaxy S20 to S6 as well as Note10+, Note9 and Note8.
You must have at least Android v1.4.8 version 6.0 installed to be able to use the DJI Fly app to control the Mavic Air 2.
I assume that this is due to the test that you have to do from the next year. Digitec sells new products. Otherwise they are marked as used and these come from the buyers.
It depends on what settings you want to use for photography or filming. I use a SanDisk Extreme Plus
(https://www.digitec.ch/de/s1/product/sandisk-microsdxc-170mb-a2-128gb-extreme-plus-sdsqxbz-0128-gn6ma-microsdxc-128gb-u3-uhs-i-speicherka-10406459) and never have delays with it, even at maximum resolution.
Sali Stefan send you a link where you can read this yourself:
https://www.digitec.ch/de/page/neue-drohnenregulierung-was-mit-bestehenden-drohnen-geschieht-16273
Greetings Jimmi