Bemero Microphone & line cable

Microphone and line cable, black. Microphone and line cable with symmetrical signal transmission. Length: 50 running meters on a reel. PVC outer jacket and PE insulation. Shielded twisted-pair cable. Conductor cross-section: 0.22 mm², overall diameter: 6.5 mm (± 0.2 mm), AWG: 24. Wiring: Pin 1 = Ground (shielding, ground), Pin 2 = Signal (hot), Pin 3 = Signal- (cold). Symmetrical vs. asymmetrical signal transmission. Whether on stage, in the studio, or in the rehearsal room, asymmetrical signal transmission has no place there and should be avoided as much as possible or kept as short as possible and quickly converted to symmetrical. Unless it involves low-impedance instrument or speaker signals. Guitar cables, for example, are asymmetrically (unbalanced) wired. A symmetrical (balanced) cable consists of two signal conductors: Pin 1 for signal hot, Pin 2 for signal- cold, as well as a ground conductor. The signal conductors are twisted against each other. The ground serves as a shield. Since the signals on the conductors are out of phase, any interference is canceled out. Therefore, a symmetrical cable is much less susceptible to interference and ground loops over longer distances than an asymmetrical cable will ever be. Bemero for your projects. Bemero provides you with a selected portfolio of accessories for studio and stage that are indispensable for the implementation of your projects. So go ahead and make your next big thing. Realize your project, and Bemero supports you with the necessary little helpers, including this cable.