CHF19.70
Lindy HDMI Splitter Compact
Question about Lindy HDMI Splitter Compact
The Lindy HDMI 2.0 splitter works perfectly when both outputs are in operation. If only 1 output channel is connected to 1 monitor, the picture is reproduced but the sound is missing. I have noticed that the HDMI splitter is no longer available under Control Panel/Sound. Is there a solution?
digitec
10 months ago
Helpful answer
It seems that the HDMI splitter has problems with audio transmission when only one output channel is used. Here are some possible solutions:
1. check the cables: make sure all HDMI cables are connected correctly and are not damaged.
2. EDID settings: Sometimes EDID problems can occur that affect audio transmission. An EDID emulator could help to solve these problems.
3. restart devices: Try to switch off all devices and switch them on again in the correct order: First the splitter, then the monitor and finally the source.
If these steps do not help, it may be useful to contact the manufacturer directly or seek further support in a forum.
Automatically generated from the .1. check the cables: make sure all HDMI cables are connected correctly and are not damaged.
2. EDID settings: Sometimes EDID problems can occur that affect audio transmission. An EDID emulator could help to solve these problems.
3. restart devices: Try to switch off all devices and switch them on again in the correct order: First the splitter, then the monitor and finally the source.
If these steps do not help, it may be useful to contact the manufacturer directly or seek further support in a forum.