Best selling Server cabinets from Roline
On this page you'll find a ranking of the best Roline products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Roline 19-inch wall-mounted housing Basic 7 U
Roline 19-inch Wall Cabinet Basic 7 HE 540x400 W x D Kit gray. The 19" wall cabinets of the Roline Basic series are delivered in an unassembled state as a flat pack (kit). Available in four different height units and equipped with a full glass door as well as cable entries with brushes at the top and bottom, they are ideal for sub-distribution or the setup of a small to medium-sized network. Inside, there are a pair of galvanized 19" profile rails with readable height units that are adjustable in depth. Each cabinet is made from a robust steel construction of up to 1.5 mm thick steel sheet and is electrostatically powder-coated in standard colors gray (RAL 7035) and black (RAL 9005). The door hinge can be changed if necessary. Assembly is simple and quick thanks to the included assembly instructions.
2. Roline 19-Zoll Wandgehäuse Basic Plus 6HE
ROLINE 19-inch Wall Cabinet Basic Plus with a depth of 450 mm. The wall cabinets of the ROLINE Basic Plus series have been specifically designed for flexible network cabling. This series represents an ideal balance between the ROLINE PRO and the ROLINE Basic series. The base and the top are equipped with a punched cable entry. Additionally, a punched area in the top allows for the installation of a fan module. Inside, there is a pair of galvanized profile rails with a height unit of 483 mm (19"), which are also adjustable in depth. The robust steel constructions of the cabinets are made from strong steel sheet and are available in powder-coated Grey (RAL 7035) or Black (RAL 9005). The side panels are equipped with a quick-release mechanism and are removable, which improves accessibility. Optionally, a lock can also be installed in the side panels. Wall mounting is done in two simple steps: first, the back panel is screwed to the wall, and then it is connected to the cabinet. Optionally, leveling feet or wheels can be used to make the cabinets freestanding.
3. Roline 19-inch network cabinet Pro 42 U
ROLINE 19-inch Network Cabinet Pro 42 HE 800x1200 W x D Black Glass Door. The network cabinets of the ROLINE Pro Series have been designed to enable particularly comfortable and flexible network cabling. With brush inlets in the roof and floor areas (from 26 HE and 800 mm cabinet width), a sliding inlet in the floor chassis with a rubber seal, as well as brush strips above and below the rear door (from 26 HE), they offer versatile applications for various scenarios. Vertical cable management channels with covers, installed next to the profile rails (from 800 mm cabinet width), complete the design. A recessed, removable top with ventilation slots improves air circulation and allows for easy installation of a fan module. Inside, there are two pairs of galvanized 19" profile rails that are readable from both directions and adjustable in depth. They are also connected with additional depth braces within the cabinet. Each cabinet is made of a robust steel construction with a material thickness of up to 1.5 mm steel sheet.
4. Roline 19-inch server rack 36 U
Roline 19-inch server cabinet 36U 600x1000 mm W x D black Plexiglass. The server cabinets of the Roline Pro Series have been specifically designed for comfortable and flexible network cabling. On the sides of the top and bottom (from 800 mm cabinet width), there are brush entry points, a sliding entry with a rubber seal, and an additional brush entry in the bottom chassis, providing versatile application options. Perforated single-wing front doors and double-wing rear doors, each with a swivel handle and profile half-cylinder, ensure improved air circulation. The top features a perforated cover that allows for easy installation of a fan module.
5. Roline 19-inch network cabinet Pro 26 U
Roline 19-inch Network Cabinet Pro 26 HE 800x1000 W x D Glass Door Gray. The network cabinets of the Roline Pro Series are designed to enable particularly comfortable and flexible network cabling. With brush entry points in the roof and floor areas (from 26 HE and 800 mm cabinet width), a sliding entry in the floor chassis with a rubber seal, and brush strips above and below the rear door (from 26 HE), they offer versatile applications for various scenarios. Vertical cable management channels with covers, installed next to the profile rails (from 800 mm cabinet width), complete the design. A recessed, removable top with ventilation slots improves air circulation and allows for easy installation of a fan module. Inside, there are two pairs of galvanized 19" profile rails that are readable in both directions and adjustable in depth. They are also connected with additional depth supports within the cabinet. Each cabinet is made of a robust steel construction with a material thickness of up to 1.5 mm steel sheet.
6. Roline 19-inch network cabinet Basic 32 U
ROLINE 19-inch Network Cabinet Basic 32 HE 800x800 BxT Glass Door Gray. The network cabinets of the ROLINE Basic series are designed to enable simple and particularly cost-effective network expansion. Strategically placed cable entry points ensure effortless installation depending on the application. The floor chassis features a cable entry point, which is protected by a screwed cover plate and positioned in the rear center area. For cabinets starting from 800 mm in width, additional cable entry points with plastic covers are added on the left and right sides. These are also integrated into the roof (once for 600 mm cabinet width, three times for 800 mm cabinet width). The roof chassis is also equipped with a punched area for the installation of a fan module. Inside, there are two pairs of galvanized 19" profile rails that are readable in both directions and adjustable in depth. They are also connected with additional depth braces within the cabinet. Each cabinet is made of a robust steel construction with a material thickness of up to 1.5 mm steel sheet.
7. Roline 19-inch server cabinet Basic 42 U
ROLINE 19-inch Server Rack Basic 42 HE 600x1000 WxD perforated black. The network racks of the ROLINE Basic series are designed to enable simple and particularly cost-effective network expansion. Strategically placed cable entries ensure effortless installation depending on the application. The floor chassis features a cable entry that is protected by a screwed cover plate and is positioned in the rear center area. For racks starting from 800 mm in width, additional cable entries with plastic covers are added on the left and right. These are also integrated into the roof (once for 600 mm rack width, three times for 800 mm rack width). The roof chassis is also equipped with a punched area for the installation of a fan module. Inside, there are two pairs of galvanized 19" profile rails that are readable in both directions and can be adjusted in depth. They are also connected to additional depth braces within the rack. Each rack is made of a robust steel construction with a material thickness of up to 1.5 mm steel sheet.
8. Roline 19-inch network cabinet Basic 42 U
ROLINE 19-inch Network Cabinet Basic 42 HE 600x600 WxD Glass Door Gray. The network cabinets of the ROLINE Basic Series are designed to enable simple and particularly cost-effective network expansion. Strategically placed cable entries ensure effortless installation depending on the application. The cable entry is located in the bottom chassis, protected by a screwed cover plate and positioned in the rear center area. For cabinets wider than 800 mm, additional cable entries with plastic covers are added on the left and right sides. These are also integrated into the roof (once for 600 mm cabinet width, three times for 800 mm cabinet width). The roof chassis is also equipped with a punched area for the installation of a fan module. Inside, there are two pairs of galvanized 19" profile rails that are readable in both directions and adjustable in depth. They are also connected to additional depth braces within the cabinet. Each cabinet is made from a robust steel construction with a material thickness of up to 1.5 mm steel sheet.
9. Roline 19-inch network cabinet Pro 32 U
ROLINE 19-inch Network Cabinet Pro 32 HE 600x600 BxT Glass Door Gray. The network cabinets of the ROLINE Pro Series are designed to enable particularly comfortable and flexible network cabling. With brush inlets in the roof and floor areas, a sliding inlet in the floor chassis with a rubber seal, as well as brush strips above and below the rear door, they offer versatile applications for various scenarios. Vertical cable management channels with covers, installed next to the profile rails, complete the design. A recessed, removable top with ventilation slots improves air circulation and allows for easy installation of a fan module. Inside, there are two pairs of galvanized 19" profile rails that are readable in both directions and adjustable in depth. They are also connected with additional depth braces within the cabinet. Each cabinet is made from a robust steel construction with a material thickness of up to 1.5 mm steel sheet.
10. Roline 19-Zoll Netzwerkschrank Pro 16 HE
Roline 19 inch network cabinet Pro 16 U with glass door. The network cabinets in the Roline Pro series were developed to enable particularly convenient and flexible network cabling. With brush inlets in the roof and base area (from 26 U and 800 mm cabinet width), a slide-on inlet in the base chassis with foam rubber seal and brush strips above and below the rear door (from 26 U), they offer a wide range of possible uses for various application scenarios. Vertical cable ducts with cover, installed next to the profile rails (from 800 mm enclosure width), complete the design. A stepped, removable cover with ventilation slots improves air circulation and allows easy installation of a fan module. Two pairs of galvanised 19" profile rails are installed inside, which can be read in both directions and are adjustable in depth. They are also connected to additional depth struts in the enclosure. Each enclosure consists of a robust steel construction with a material thickness of up to 1.5 mm sheet steel.
