RC drone accessories
only 1 piece
CHF26.90 was CHF29.40
Dronefactory TBS ASI2C Digital AirSpeed Sensor Kit
Best selling RC drone accessories from Dronefactory
On this page you’ll find a ranking of the best RC drone accessories from Dronefactory. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. Dronefactory TBS ASI2C Digital AirSpeed Sensor Kit
The TBS ASI2C Digital AirSpeed Sensor Kit from Dronefactory is a highly advanced accessory for drones that enables precise airspeed measurements. Equipped with a Measurement Specialties 4525DO sensor, this kit offers a measurement range of up to 1 psi, corresponding to speeds of approximately 100 m/s or 360 km/h. The high resolution of 0.84 Pa and the 14-bit data transmission from a 24-bit Delta-Sigma ADC ensure accurate readings. Additionally, the kit measures temperature to calculate true airspeed from indicated airspeed by utilizing the MS5611 static pressure sensor on the Pixhawk. The sensor's design minimizes the influence of nearby heat sources, resulting in more accurate temperature measurements. The kit is compatible with all generations of Pixhawk and PX4 autopilots and features easy installation with M3 / 6-32 mounting holes.
- High resolution of 0.84 Pa for precise measurements
- Compatible with Pixhawk and PX4 autopilot generations
- Includes Pitot tube and silicone tubing for easy installation
- Temperature measurement for calculating true airspeed.
2. Dronefactory WhiteNoiseFpv X TBS Race Wire
The WhiteNoiseFpv X TBS Race Wire is an innovative accessory for FPV racing and freestyle drones that offers a significant improvement in motor wiring. This product replaces a section of the motor wires beneath the propeller blades and effectively protects the drone from damage caused by propeller strikes. In the event of a crash, the propeller will simply glide over the surface of the Race Wire board during deformation, preserving the integrity of the motor wires. The installation of the Race Wire also allows for quick motor replacements without needing to open the drone, greatly simplifying maintenance. Additionally, the flat surface of the Race Wire provides the option to mount LEDs on top, enhancing the visibility and appearance of the drone. With a construction of 2oz copper and a double-layered board, the Race Wire offers comparable performance in terms of resistance and weight compared to traditional 20AWG motor wires.
- Protection against propeller strikes through a special design
- Enables quick motor changes without opening the drone
- Flat surface for LED mounting
- Made from 2oz copper with minimal resistance.
RC drone accessories
−10%
only 1 piece on sale
CHF12.50 was CHF13.90
Dronefactory WhiteNoiseFpv X TBS Race Wire
FPV accessories
3. Dronefactory TS21 Precision Soldering Iron
The TS21 Precision Soldering Iron from Dronefactory is a highly advanced tool specifically designed for precise soldering. With an innovative integrated fill light at the tip, this soldering iron allows for accurate handling even in poor lighting conditions. This not only enhances user-friendliness but also increases safety during the soldering process. The rapid heating capability of the soldering iron enables it to reach a temperature of 300°C in just 3 seconds, significantly boosting efficiency. The temperature range of 100°C to 450°C covers a wide variety of soldering needs. An integrated acceleration sensor ensures that the soldering iron enters sleep mode when not in use, preventing tip overheating and extending the device's lifespan. The aluminum alloy controller is precisely CNC-machined and features a 0.91-inch OLED display with high resolution and low power consumption. The TS21 is compatible with 210 tips and comes with a heat-sensitive sleeve that is corrosion and wear-resistant.
- Integrated fill light for precise work in poor lighting conditions
- Reaches 300°C in just 3 seconds for high efficiency
- Temperature range of 100°C to 450°C for versatile applications
- Automatic sleep mode to extend lifespan
- 0.91-inch OLED display with high resolution and low power consumption.
4. Dronefactory HQ 3X3X3 for Avata 2 Grey
The HQ 3X3X3 Propeller Guard for the DJI Avata 2 is a high-quality accessory specifically designed for use with this drone. Made from durable polycarbonate, this propeller guard offers both longevity and effective performance. With a diameter of 3 inches and a pitch of 3, it is optimally tailored to meet the requirements of the Avata 2. The set includes two clockwise (CW) and two counterclockwise (CCW) propellers, ensuring balanced flight stability. Weighing just 1.65 kg, it allows the drone to maintain its agility and maneuverability, while the precise construction enables easy installation. This propeller guard is an ideal choice for anyone looking to maximize the performance of their DJI Avata 2 while ensuring the safety of the propellers.
- Made from durable polycarbonate for increased longevity
- Optimal fit for DJI Avata 2 with a diameter of 3 inches
- Includes both CW and CCW propellers for balanced flight stability.
RC drone accessories
Quantity discount
CHF13.30 per piece for 2 units
Dronefactory HQ 3X3X3 for Avata 2 Grey
Propeller protection, DJI Avata 2
5. Dronefactory TinysLEDs RaceLiteWire RGB LED (4pcs.)
The TinysLEDs RaceLiteWire RGB LED lighting from Dronefactory is an innovative solution for drone enthusiasts who want to equip their aircraft with dynamic and customizable lighting. This lighting unit consists of four integrated 5050 RGB LEDs that are directly incorporated into the Racewire. A standout feature of these LEDs is their ability to change brightness based on the throttle position, meaning they only light up when the motors are running. This not only provides an impressive visual display but also ensures efficient energy use. Installation is flexible, as the LEDs can be mounted in any direction, and additional Racelites can be connected via the designated pads. The ability to control colors individually opens up numerous creative possibilities for lighting your drone.
- Dynamic brightness adjustment based on throttle position
- Integrated 5050 RGB LEDs for vibrant colors
- Flexible installation options in any direction
- Expandable lighting with additional Racelites via special pads.
RC drone accessories
Quantity discount
CHF12.90 per piece for 2 units
Dronefactory TinysLEDs RaceLiteWire RGB LED (4pcs.)
Drone lighting
6. Dronefactory Gemfan 5043 WinDancer Durable Triblade Propeller Galaxy Blue
The Gemfan 5043 WinDancer Durable Triblade Propeller is specifically designed for enhanced performance during fast cornering. This propeller offers an optimal combination of grip and responsiveness, making it ideal for both racing and freestyle applications. Made from robust polycarbonate, it ensures durability and reliability under various conditions. With a diameter of 5 inches and a pitch of 4.3 inches, this propeller is designed to maximize the performance of multirotors. The POPO compatibility allows for easy installation and removal, making handling more convenient. The package includes two clockwise and two counterclockwise rotating propellers, providing a complete set for use.
- Optimized performance for fast cornering
- Made from durable polycarbonate
- POPO-compatible for easy installation
- Suitable for racing and freestyle applications.
RC drone accessories
Quantity discount
CHF12.50 per piece for 2 units
Dronefactory Gemfan 5043 WinDancer Durable Triblade Propeller Galaxy Blue
Propeller protection
7. Dronefactory GF F6030 Floppy Proppy 3-Blade Blue
RC drone accessories
Quantity discount
CHF13.70 per piece for 2 units
Dronefactory GF F6030 Floppy Proppy 3-Blade Blue
Drone propellers
8. Dronefactory Cable conduit 6mm 10cm red
RC drone accessories
Quantity discount
CHF3.25 per piece for 2 units
Dronefactory Cable conduit 6mm 10cm red
Drone cable
9. Dronefactory iFlight Thunder H7 Flight Controller
The iFlight Thunder H7 Flight Controller represents an innovative development in drone technology. As the first flight controller designed for direct 12s input, it offers a combination of durability and high performance. The controller is equipped with a powerful H7 processor that enables precise D-shot timings, optimizing performance even in demanding x8 motor configurations. The design of the Thunder H7 is versatile, providing both plug-and-play options and solder pads to meet the needs of professional builds. Weighing only 14 grams and featuring compact dimensions, this flight controller is ideal for various drone applications.
- High-speed H7 processor for enhanced performance
- Unique capacitor filtration slot for clean electrical signals
- Versatile design with plug-and-play options and solder pads
- Supports multiple firmware options such as Betaflight and INAV
- Lightweight construction at just 14 g.
10. Dronefactory TBS Unify MMCX 90° to SMA pigtail
RC drone accessories
−6%
CHF15.90 was CHF16.90
Dronefactory TBS Unify MMCX 90° to SMA pigtail
FPV accessories
Product order
See all products