Best Digitus products in the KVM switches category
On this page you'll find a ranking of the best Digitus products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Digitus DS-12883
With the DIGITUS 4-Port KVM Switch for dual displays, you can operate four 4k-compatible PCs using a single USB keyboard and mouse combination. By pressing a button or hot key, you can switch comfortably between all four PCs and are spared the trouble of replugging all cables. Output on up to two monitors is provided via two HDMI® outputs on the rear side. You can also switch between the audio signals for the microphone and speaker. In addition, a USB port is included on the front side for use with other peripheral devices like USB sticks or external hard drives on both PCs. The connected peripheral devices are each assigned to the active PC. Status LEDs on the front side of the switch show you the current configuration at all times. The slim switch features the added benefits of sturdy metal housing.
2. Digitus HDMI Extender Set Full HD 50m
The Digitus HDMI Extender Set, Full HD offers an extender solution for the highest demands up to 50 meters. It transmits digital video and audio signals over a maximum length of up to 50 meters. The highest supported video resolution is 1080p / 60Hz. The sending unit features an EDID switch, which allows for regulation of the resolution and audio format of the output signal. There is also an HDMI Loop Out port on the sender, enabling the connection of a local monitor. Thanks to PoC (Power over Cable) support, only the sending unit needs to be powered. Included are two bidirectional infrared units (transmitter, receiver), which allow for the remote control of the connected input source.
3. Digitus DS-12862
With the DIGITUS 2-Port KVM Switch for Dual Displays, you can control two 4K-capable PCs using a single USB keyboard and mouse combination. You can easily switch between the two PCs at the push of a button or via a hotkey, eliminating the need to unplug and replug all cables. The output to up to two monitors is provided through the two DisplayPort outputs on the back. Audio signals from the microphone and speakers are also switched. Additionally, there is a USB port on the front that can be used for other peripherals like USB sticks or external hard drives on both PCs. The connected peripherals are assigned to the active PC. Status LEDs on the front of the switch indicate the current configuration at all times. The switch is completed with a robust metal housing.
4. Digitus IP KVM Extender Set, 120 m point-to-multipoint, 1080p/60Hz
Our Full HD AV signal extension system allows you to transmit Full HD AV signals over existing CAT-5e (or higher) cables over unlimited distances using your existing network infrastructure. Thanks to its compatibility with standard network switches, installing and expanding your AV network becomes a breeze.
With a point-to-point connection, you can extend your Full HD AV signals over CAT-5e (or higher) cables up to 120 meters. This ensures reliable transmission even over long distances.
The system also offers a convenient KVM function on the receiver side. Simply connect a mouse and keyboard to control your signal source directly from the output screen. This allows for comfortable and efficient operation.
Want to expand your AV network? No problem! Our system supports expansion to up to 253 screens by adding additional receivers. Just use the DS-55530 (receiver) to transmit your AV signals to more screens and customize your system according to your needs.
With support for resolutions up to 1080p/60Hz, the system delivers Full HD quality for your AV content.
Our system is compatible with CAT-5e (or higher) network cables. This enables you to cost-effectively utilize your existing infrastructure without additional cabling or expensive upgrades.
With HDMI 1.3 and HDCP 1.4 support, the system offers broad compatibility with various AV devices and ensures the secure transmission of protected content.
Expand your AV capabilities with our Full HD AV signal extension system. Enjoy easy installation, reliable signal transmission, and impressive image quality while seamlessly integrating your AV devices into your network.
5. Digitus HDMI Extender Set, 4K/120Hz, 40 m
The DIGITUS HDMI Extender Set enables HDMI signal transmission over a distance of up to 40 meters (4K/120Hz, 4:4:4) using CAT 6 or higher cables. The set also includes bi-directional IR transmission, allowing for flexible control of the signal source. It is suitable for wall mounting, providing flexible installation options.
6. Digitus 4K HDMI Extender CAT / IP(Set)
4K HDMI Extender Set over IP, 4K*2K@30Hz via network cable (CAT 5/5e/6/7), black. Use additional receiver units (DS-55123) and your existing network infrastructure to display video content on up to 253 screens (IP connection). Extends 4K video content with a CAT-6 cable up to 120 m (point-to-point connection). Signal extension (unlimited distance) over the existing local network infrastructure (IP connection). Supports 4K (30Hz), 3840x2160p resolution. Compatible with CAT 5, CAT 5e, CAT 6, and CAT 7 network cables. HDMI bandwidth: 10.2 Gbit/s (max.). Supports HDCP 1.4. The 4K HDMI Extender Set (DS-55122) is a high-performance video distribution system consisting of a transmitter and receiver unit. It extends 4K HDMI signals over a CAT6 network cable (point-to-point connection) up to 120 m. Additionally, with a network switch and individual receiver units (DS-55123), you can distribute your video content over the existing network (IP connection) to up to 253 displays. The additional integrated unidirectional IR interface allows remote control of the input source.
7. Digitus DS-12882
Digitus KVM Switch 4-Port Dual-Display, 4K, Display-Port
With the Digitus 4-Port KVM Switch for dual displays, you can control four 4K-capable PCs using a single USB keyboard and mouse combination. You can easily switch between the four PCs at the push of a button or using hotkeys, eliminating the need to unplug and replug all cables. The output to up to two monitors is done via the two DisplayPort outputs on the back. Audio signals from the microphone and speakers are also switched. Additionally, there is a USB port on the front that can be used for other peripherals such as USB sticks or external hard drives on both PCs. The connected peripheral devices are assigned to the active PC. Status LEDs on the front of the switch indicate the current configuration at all times. The switch is completed with a robust metal housing.
Features:
- UHD resolution: 4K / 60 Hz (3840 x 2160p) / Subsampling: YUV 4:4:4
- Inputs:
- 8 x Display Port inputs (4x2)
- 4 x USB-B
- 4 x Audio combo jack 3.5 mm (Microphone, Speaker)
- Outputs (Console):
- 2 x Display Port
- 2 x USB-A (Mouse, Keyboard)
- 2 x Stereo Audio 3.5 mm (Microphone, Speaker)
- Additional connection on the front:
- 1 x USB-A for additional peripheral devices, such as printers or USB sticks
- USB Specification: USB 2.0
- Supported audio formats: Dolby True HD, DTS HD Master Audio
- Switching between PCs: Switch on the front or hotkeys
- Status LED on the front shows current configuration
- The device is platform-independent, suitable for all operating systems
- Operating temperature: 0°C ~ 50°C
- Storage temperature: -20°C ~ 60°C
- Operating humidity: 0 - 80% RH (non-condensing)
- Housing material: Metal
- Device power supply: USB power supply or optional 9 V DC power adapter (300mA, 5.5x2.1 mm plug)
- Dimensions (W x D x H): 20.2 x 11.0 x 6.6 cm
- Weight: 920 g.
8. Digitus DS-12901
The DIGITUS 2-port KVM switch with USB-C and network connectivity gives you the ability to control two 4K-capable PCs from a single USB keyboard and mouse. Conveniently switch between the two PCs at the touch of a button, eliminating the need to reconnect all cables. The Gigabit network port provides convenient access to the network via the additional USB-C port. The output to a monitor is done via the integrated HDMI output. Audio signals from the microphone and speakers can also be switched. In addition, another USB-C port and two USB A (2.0) ports are available on the front, which can be used for further peripherals such as USB sticks or external hard drives. Status LEDs on the front of the switch show you the current status at all times. The slim switch is rounded off by the robust metal housing.
9. Digitus HDMI KVM Extender 120 m via network cable Cat 5 5E
Digitus Extender DS-55202
Manufacturer: Digitus
Description: HDMI Extender, 120m
Type: DS-55202
Transmitter: No
Receiver: Yes
Range: 120 m
The Digitus HDMI KVM Extender DS-55202 enables the transmission of HDMI signals over a network cable (Cat 5, 5E, 6) up to 120 m. It supports a maximum video resolution of 1080p at 60 Hz and allows control of a keyboard and mouse via USB at the receiving unit.
Additional features include:
- Extension of the HDMI signal up to 120 m using a standard network cable
- Unlimited distance extension of the signal over the existing local network infrastructure (via IP connection)
- Support for LAN standard 802.3 Ethernet 10/100/1000 Mbps
- LED activity indicator for function, keyboard, and mouse
The Digitus HDMI KVM Extender Set consists of a transmitting unit (local site) and a receiving unit (remote site). It is ideal for industrial, commercial, and public applications.
10. Digitus IP KVM Extender, Receiver (RX) Unit for DS-55529
Expand the HDMI KVM IP Extender Set (DS-55529) with additional receiver units to simultaneously display your AV content on multiple monitors. The set extends Full HD AV signals over a CAT5e (or higher) network cable (point-to-point connection) up to 120 meters. Additionally, you can use network switches and individual receiver units (DS-55530) to distribute your video content over an existing network (IP connection) to up to 253 displays and extend it over unlimited distances. Thanks to KVM functionality, you can connect a mouse and keyboard to the receiver, allowing you to control the signal source on the output screen.
