Best Victron Energy products in the Charge controller category
On this page you'll find a ranking of the best Victron Energy products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Victron Energy Orion XS
Orion XS 12/12V - 50Amp DC/DC charger has been developed from scratch and redefines adaptive DC-DC charging. For use in dual battery systems charged with an (intelligent) alternator. This device not only ensures first-class performance, but also guarantees the safety of your system. With configurable input and output currents, you can keep an overview and be confident that your Smart BuckBoost will run at full power up to 40°C. The aluminium board's innovative cooling technology delivers an astonishing 98% efficiency without the need for fans. As an integral part of your Victron system, the Orion XS offers comprehensive (remote) monitoring and control capabilities, giving you complete control over your device and system. Fully configurable. Motor shutdown detection. Intelligent charging algorithms. Efficient cooling. Employs VictronConnect (Bluetooth or Ve.Direct. Remote monitoring optional. Set the input and output current precisely with simple controls. This helps to protect alternators from overload and charge the service battery correctly, especially with smart alternators. An unlimited number of Orion XS devices can be connected in parallel. This makes it easy to scale the output current to the requirements of your system. The Orion XS has customisable charging algorithms and 8 pre-set battery modes. For lead-acid batteries, these settings ensure optimum absorption times for both low and deep discharges. The Orion XS is equipped with comprehensive electronic protection against overload, short circuit and overtemperature. To prevent damage to lithium batteries, the charger switches off automatically at low temperatures and when the input voltage falls below a user-configurable blocking value. It thus protects the starter battery from deep discharge.
2. Victron Energy SmartSolar 100/30 MPPT
The Victron SmartSolar 100/30 MPPT solar charge controller 12V/24V battery is suitable for solar modules up to 440 W (at 12V) or 880 W (at 24V) total power. The charge controller can be conveniently configured and monitored via Bluetooth with an app. The ultra-fast "Maximum Power Point Tracking" (MPPT) significantly improves the yield from the solar cells, especially in overcast conditions. The built-in "BatteryLife" algorithm ensures optimal battery charging, even if the battery cannot be completely charged in one charging process (because, for example, the solar cell no longer provides charging power due to shading or darkness).
3. Victron Energy SmartSolar MPPT 75/15
The high-quality charge controller for many application areas.
4. Victron Energy Charge controller SmartSolar MPPT 100/20
A solar charger is supplied with energy by solar modules and then stores it in batteries. Using progressive technology, the BlueSolar charge controller maximises this energy production and intelligently directs it to fully charge the batteries in the shortest possible time. The device maintains the functionality of the battery and thus extends its life. By continuously monitoring the voltage and current output of your solar modules, BlueSolar MPPT technology ensures that all the energy available is extracted from the modules and stored. The advantage of this is most noticeable when the sky is partially overcast and the light intensity is constantly changing. You can remotely control and monitor the extensive functions of your BlueSolar MMPT charger and link it to your smartphone or other device via VictronConnect. If your system is connected to the Victron Remote Management Internet Portal (VRM), you have full access to your MPPT anytime, anywhere. Both services are available free of charge. The intelligent load output prevents damage caused by using empty batteries. You can configure the voltage at which the BlueSolar charge controller disconnects a load - thus preventing excessive discharge of your batteries. Every day, the device tries to recharge the battery to 100%. If this is not possible due to bad weather, it will increase the voltage value for disconnection daily until it is successful.
5. Victron Energy EasySolar
MPPT solar charge controller, inverter/charger and AC power distributor in one. Connect up to three PV panel strings with three sets of MC4 (PV-ST01) PV connectors. Easy installation with only a small amount of wiring. AC power distribution from residual current circuit breaker and four AC outlets. PowerAssist technology prevents overload of mains or generator power supply. IP 21 protection class.
6. Victron Energy SmartSolar MPPT 75/10
Ultra-fast maximum power point tracking (MPPT). Detection of the maximum power point even in partial shadows. Load output. Flexible charging algorithms. Overheating protection and load reduction at high temperatures. Automatic battery voltage detection and intelligent battery management by load shedding. A solar charger is supplied with energy via solar modules and then stores it in batteries. Using progressive technology, the BlueSolar charge controller maximises this energy production and intelligently directs it to fully charge the batteries in the shortest possible time. The device maintains the functionality of the battery and thus extends its life. By continuously monitoring the voltage and current output of your solar modules, BlueSolar MPPT technology ensures that all the energy available is extracted from the modules and stored. The advantage of this is most noticeable when the sky is partially overcast and the light intensity is constantly changing. You can control and monitor the extensive functions of your BlueSolar MMPT charger remotely: "Bluetooth Smart" allows you to set up and monitor it with a smartphone or other Bluetooth-capable device. If your system is connected to the Victron Remote Management Internet Portal (VRM), you have full access to your MPPT anytime, anywhere. Both services are available free of charge.
7. Victron Energy Cerbo GX MK2
This all-new communication hub gives you perfect control of your system wherever you are and maximises its performance. Simply connect via our Victron Remote Management (VRM) portal or access an MFD or our VictronConnect app directly via the separate GX Touch thanks to the added Bluetooth capability. This latest addition to the GX range combines the best in connectivity and redefines smart power solutions in every way. Technical data: 2 VE.Bus, 3 VE.Direct, 3 USB, HDMI, 2x 2 Ve.CAN (CAN BMS capable isolated), MicroSD, 2 WIFI, LAN, 4 digital, 4 tank, 4 temp inputs, 2 relays, customised RJ45 ports.
8. Victron Energy SmartSolar MPPT
A solar charger is supplied with energy via solar panels and then stores it in batteries. Using the fastest technology, the SmartSolar maximizes this energy harvesting and intelligently directs it to fully charge the batteries in as short a time as possible. The SmartSolar maintains the battery's functionality, extending its life. The SmartSolar charge controller will even recharge a severely discharged battery. It can operate with a battery voltage as low as 0 volts, provided the cells are not permanently sulfated or otherwise damaged.
9. Victron Energy EasySolar II 24/3000/70-32 MPPT 250/70 GX
10. Victron Energy SmartSolar MPPT 250/60-Tr
