3D printer accessories
Quantity discount
CHF8.05 per piece for 3 units
Bambu Lab Glue Stick for Building Board
Best Bambu Lab products in the 3D printer accessories category
On this page you'll find a ranking of the best Bambu Lab products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Bambu Lab Glue Stick for Building Board
Overview: A bamboo glue stick provides suitable adhesion between the build plate and the model and is also formaldehyde-free.
Compatibility: All series
User manual: Apply evenly to the cleaned build plate before printing and cover all printing areas. Please wash the plate after the printing process is complete.
Note: Warning! Choking hazard. Please keep small parts away from children under 3 years old and store them in a cool, dry place.
2. Bambu Lab P1 Hotend - hardened steel nozzle 0.4mm
Bambu Lab Hotend
The Bambu Lab Hotend features a unique all-in-one design, where the heat sink, neck, heating block, and nozzle merge into a single, seamless unit. Thanks to this innovative design, Bambu Lab Hotends can be heated up significantly faster than traditional hotends. Additionally, the risk of filament leaking or oozing at the interface between the nozzle and heating block is eliminated, ensuring a smooth and reliable printing experience.
Bambu Lab offers two variants of hotends: a single hotend with a nozzle and a complete hotend assembly. To successfully use the hotend with nozzle in your 3D printer, you will need the following components for assembly: a cooling fan, a ceramic heater, a thermistor, and a silicone sock. These components allow you to assemble a complete hotend assembly and operate the hotend efficiently.
With 0.6 mm and 0.8 mm nozzles, the larger diameter of the hotend allows for more filament to be extruded per second, resulting in significantly higher printing speeds.
3. Bambu Lab Hotend - hardened steel nozzle 0.4mm
Bambu Lab Hotend
The Bambu Lab Hotend features a unique all-in-one design, where the heat sink, neck, heating block, and nozzle merge into a single, seamless unit. Thanks to this innovative design, Bambu Lab hotends can be heated up significantly faster than traditional hotends. Additionally, the risk of leaking or filament oozing at the junction between the nozzle and heating block is eliminated, ensuring a smooth and reliable printing experience.
Bambu Lab offers two variants of hotends: a single hotend with a nozzle and a complete hotend assembly. To successfully use the hotend with nozzle in your 3D printer, you will need the following components for assembly: a cooling fan, a ceramic heater, a thermistor, and a silicone sock. These components allow you to assemble a complete hotend assembly and operate the hotend efficiently.
With 0.6 mm and 0.8 mm nozzles for higher printing speeds. The larger diameter of the hotend allows for more filament to be extruded per second, resulting in a significantly higher printing speed.
4. Bambu Lab Textured PEI Plate Gold - X1 / P1 Series
The Bambu Lab Textured PEI Plate Gold is a high-quality accessory for 3D printers, specifically designed for the X1 and P1 series. This plate provides excellent adhesion for the first layer, resulting in improved print quality. The manufacturing process has been optimized to significantly enhance the durability of the plate, allowing it to withstand the demands of 3D printing. The PEI surface enables easy removal of prints once the temperature of the heated bed has cooled to room temperature. In special cases, it may be necessary to use adhesive; however, this is not required in most applications. The plate is compatible with a variety of filaments, including common materials like PLA and TPU, as well as heat-resistant materials like ABS and Nylon. The magnetic adhesion of the stainless steel plate minimizes warping during the printing process, increasing the reliability and quality of the print results.
- Improved adhesion without adhesive for most filaments
- Easy removal of prints through cooling
- Compatible with common and heat-resistant filaments
- Robust magnetic adhesion to prevent warping.
5. Bambu Lab Hotend with nozzle stainless steel A1 series
The special design of hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. In addition, the magnetic block installed on the hotend heatsink enables quick and accurate fixation of the hotend to its precise mounting position. This feature enhances the convenience of quick swapping, allowing for easy removal and installation of the hotend. *Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower section of the hotend) to prevent any risk of burns. In the Box 1. Hotend with Nozzle * 1 Compatibility A1 Series.
6. Bambu Lab Hotend with nozzle hardened steel A1 series
The special design of the hotend heating assembly allows for easy separation of the thermal and electronic components of the hotend. Additionally, the magnet block installed on the hotend heat sink enables quick and precise fixation of the hotend in its exact mounting position. This feature enhances the convenience of a rapid exchange and allows for easy removal and installation of the hotend. Please ensure that the hotend is cooled down before replacing it, and do not touch the heat block (the lower part of the hotend) to prevent burns. In the box: Hotend with nozzle. Compatibility: A1 series.
7. Bambu Lab Reusable spool
The entire filament feeding system has been built around a reusable spool design, achieving at least 20% less plastic waste during filament consumption. The packaging material has been carefully selected to minimize the use of non-recyclable materials.
8. Bambu Lab Desiccant for AMS6 pack
Instructions for use: Please use 2 to 3 new desiccant packs. Remove the plastic wrap from the desiccants and place them in the designated spots for the AMS. Close the AMS cover to ensure the dryness of your filament. Make sure that the locking tabs on the AMS are closed to isolate the AMS from the surrounding air.
How to check if the desiccant needs to be replaced: In its original state, the desiccant appears as a white powder. Upon absorbing moisture, it gradually changes to a yellow paste. When the entire pack turns yellow, it indicates that the desiccant has lost its ability to keep the filament effectively dry. At this point, replacing the desiccant is necessary. It is also recommended to dry the filament again. Please check every 2 weeks to see if the desiccant needs to be replaced.
3D printer accessories
Quantity discount
CHF6.80 per piece for 3 units
Bambu Lab Desiccant for AMS6 pack
Accessories
9. Bambu Lab P1 Hotend - hardened steel nozzle 0.6mm
Bambu Lab Hotend
The Bambu Lab Hotend features a unique all-in-one design, where the heat sink, neck, heating block, and nozzle merge into a single, seamless unit. Thanks to this innovative design, Bambu Lab Hotends can be heated up significantly faster than traditional hotends. Additionally, the risk of filament leakage or oozing at the interface between the nozzle and heating block is eliminated, ensuring a smooth and reliable printing experience.
Bambu Lab offers two variants of hotends: a single hotend with a nozzle and a complete hotend assembly. To successfully use the hotend with nozzle in your 3D printer, you will need the following components for assembly: a cooling fan, a ceramic heater, a thermistor, and a silicone sock. These components allow you to assemble a complete hotend assembly and operate the hotend efficiently.
With 0.6 mm and 0.8 mm nozzles for higher printing speeds. The larger diameter of the hotend allows for more filament to be extruded per second, resulting in a significantly higher printing speed.
10. Bambu Lab AMS lite
AMS lite brings color to your 3D-printed models and opens up entirely new possibilities for your creativity. With AMS lite, you can set up an automatic filament detection system to seamlessly load a new spool when the current one is empty. It ensures an uninterrupted printing process and also prevents filament waste caused by manual spool changes. The spring-loaded rotating spool holder grips the spool at the center hole, enhancing spool compatibility, especially with paper spools. The simple and clear design of the AMS lite makes it easy to work with. The transparent housing allows the user to easily observe the internal operating structure and troubleshoot issues. With AMS lite, Bambu Lab printers can use breakaway support material or dissolvable filament to minimize the hassle of removing supports. Bambu Lab filaments use RFID, which is read by the AMS to automatically identify and apply the best settings for your material. The RFID tag is automatically synchronized with Bambu Studio.
