Bambu Lab X1 / P1 Smooth PEI Plate

Bambu Lab Smooth PEI Plate for X1 / P1 Series enables printing with common materials such as PLA, TPU, PETG and PVA. Compatible with X1, P1 and X1E. Note: If bubbles appear on the underside of the plate, it may be helpful to heat it for several hours at a temperature of at least 80 degrees on the heating bed to remove the bubbles. Dust and grease deposits on the building board reduce adhesion. It is recommended to clean the surface regularly with water and detergent to ensure optimum adhesion. Do not clean the smooth PEI with acetone, as this will damage the PEI surface. Always wait a few minutes before removing the printed models so that the plate can cool down and the print can be easily removed. This prevents damage to the plate and ensures a long product life. Careful sanding of the surface with fine sandpaper (600 grit recommended) can help to restore adhesion. The smooth PEI sheet is a wear part that wears out over time.