Questions about Feller EDIZIOdue switch S3 UP

The EdizioDue pressure switch Scheme 3 from Feller is a flush-mounted pressure switch, not a dimmer switch. It can perform a normal switching operation, but it is not specifically designed as a replacement for a dimmer switch. As your Philips Hue lamps are very sensitive to dimmer switches and react incorrectly to them, it is generally possible to replace the dimmer switch with a normal pressure switch to bypass the dimming function. The EdizioDue pressure switch is a simple pressure switch without a dimming function and could therefore be used as a replacement. However, it should be noted that the EdizioDue push switch scheme 3 does not offer any special integration or control for Philips Hue. For seamless and smart control of Philips Hue lamps, Feller offers separate Smart Light Control wireless push-buttons that work wirelessly and without batteries and are specially optimised for Philips Hue. However, these are not simple push-button switches, but wireless switches with special functions for Hue. To summarise: Yes, you can replace the dimmer switch with this normal push-button switch to avoid the dimming function and thus prevent the Hue lamps from misbehaving. The switch itself then only controls switching on and off without dimming. Feller has other solutions for smart Hue control.

The switch is designed for a nominal voltage of 230 V and is not designed for operation with 12 V. It is therefore not recommended to operate it with a voltage of 12 V, even if the maximum current of 16 A is not exceeded. The manufacturer's technical specifications should always be observed to ensure that the switch functions correctly and safely.

To replace an old Feller Standarddue switch with the EdizioDue, you must ensure that the dimensions and mounting method are compatible. The EdizioDue is designed for flush mounting and has a protection rating of IP20, which makes it suitable for dry indoor areas. The cover should match the standard due dimensions to allow easy replacement. It is advisable to check the exact dimensions and connection types to ensure that no additional adjustments are required.

Yes, works like a normal switch. Press once = on. Press again/off

The difference is that the Feller EDIZIOdue is scheme 0 / scheme 3 and the Feller EdizioDue pressure switch scheme 3 is scheme 0 / scheme 1.

Both. This is a scheme 3 switch. This can be used for scheme 0 (1 switching point) or scheme 3 (two switching points).

If you remove the innermost square cover (the plastic part with which you also effectively switch), two screws should become visible underneath which you have to loosen.