Questions about Elite Screens Spectrum

Yes. It has an infrared and a wired remote control included. The screen can also be operated with Logitech Harmony.

The "Elite Screens Spectrum" projection screen with product ID "ELECTRIC100H" uses "MaxWhite® FG" material or, in the case of the AcousticPro UHD series, "AcousticPro UHD" material. - The "MaxWhite® FG" material is opaque and designed for high-quality projection with a gain of 1.1 and a wide viewing angle of 180 degrees. It is therefore suitable for use as a projection screen and is not transparent. - AcousticPro UHD" material is acoustically transparent, meaning it allows sound to pass through, but remains opaque to light and is designed for projection applications. Therefore, this projection screen is not transparent and can be used in front of a TV without affecting the visibility of the projection screen itself. However, it is important to note that the projection screen is intended for use with a projector and not as a traditional TV screen.

Remote control is IR, you have to point it at the right place for it to work. There was some cabling for a switch but did not look very well designed so I cannot say if it would work....I never used it.

Yes :)

No, definitely not!

I have gladly linked you to the instructions and the data sheet of the canvas. https://www.elitescreens.ch/motorleinwaende/spectrum/spectrum-electric106nx-economy-2283x1427cm-1610.php

Hello Sa_liechti. No, the projection surface is bright, Elite Screens has screens with black masks as shown in the product example picture. Like a frame that is then black, the screen surface is always bright. LG

RJ45

there are screws and dowels included but it depends on the ceiling or wall what you have to use for the dowels.

According to the manufacturer's website, unfortunately not, no. I'm sorry. This has its own category with screens made for UST projectors, but this is in a completely different price segment (1200.- upwards). For example, this one should work according to the manufacturer: Elite Screens Aeon Edge Free CLR (Fixed Frame, Day Screen, 120", 16:9)

Digitec is obliged to supply electrical equipment with a Swiss plug. If the device is supplied with a foreign plug, a suitable replacement cable must be provided if the power cable is plugged in or, if the power cable is permanently connected, a suitable adapter. If the appliance is not equipped with a suitable plug, please contact customer service and insist on a free cable or adapter.

I also have it in front of a window and only the light on the left and right comes through

Hellou Marcel Häfliger. I have also mounted the screen on the ceiling. The black leading edge is 15.2cm at the top. At the side 5cm and at the bottom 6cm. I use the screen with an LG ultra-short distance beamer which has an AppleTV connected. You can watch TV as normal.

No, you can't.

According to our information, 3.10m.

Unfortunately, it is no longer possible to collect the product. However, no additional transport costs will be charged unless you book a service such as "delivery to place of use + installation".

According to our own research, the casing is white.

Power connection

You will find all dimensions in the following PDF on the last page: https://images-na.ssl-images-amazon.com/images/I/919U4fMnFqS.pdf PS: The table consists of two halves with mm and inch.

I don't understand the question. 3D capability depends on the projector and less on the screen... unless you use a 3D system with two polarised projectors (way beyond my budget). But I can confirm that this screen reflects the image great. I use it for my Xbox and am very happy with the setup.

This is possible yes, the mounting direction is towards the rear (wall) and above (ceiling).

Ca. 14kg.

Unfortunately, we only have this canvas in black.

Alle Massen auf https://www.elitescreens.ch/downloads/spectrum-abmessungen.pdf

https://elitescreens.com/front/front/cms/slug/service -> 3. Vertical Limit Adjustments -> Spectrum/VMAX2 Instructions -> Download There is also an interactive video below where you can click on the appropriate adjustment and it will be shown (Click on I understand for Interactive Video Demonstration). Elite Screens recommends that this adjustment is carried out by a professional to avoid damage to the engine.

Look here: https://www.youtube.com/watch?v=njeV4r42VHY Or also at the manufacturer: http://elitescreens.com/front/front/faq/slug/9

Good day. I also use this screen with a Logitech Harmony. However, not via action start (manufacturer not stored as far as I know). I have assigned the screen as a separate device and can control it manually via the Harmony.