Questions about Elgato Wave Mic Arm (Low Profile)

Since Digitec receives the delivery dates directly from the suppliers, it really is as described on the homepage: Currently not available and no delivery date available. I would recommend activating the "Notify me when available" button. Then you will receive an email as soon as it is available again :-)

The microphone must not weigh more than 2 kg including accessories to prevent the arm from dropping. This corresponds to approximately 4.4 pounds and is stated in the manufacturer's technical specifications.

The arm of the microphone stand can be up to 740 mm long.

Hello, The joints do not need to be fixed with screws to adjust the angles. You can change the height or inclination directly during use. However, it is possible to adjust the resistance of the joints so that they offer more or less firmness according to your preferences.

The table clamp of the Wave Mic Arm LP is expandable up to 60 mm, which means that it can be mounted on tables with a thickness of up to 6 cm. It should therefore be possible to mount the bracket on a table with a height of 6 cm as long as the clamp can be opened wide enough to encompass the table.

Elgato's Wave Mic Arm (Low Profile) is compatible with the HyperX microphone, provided the microphone uses one of the supported microphone holder sizes. The Wave Mic Arm LP supports 1/4, 3/8 and 5/8 inch microphone holders, which includes most standard microphones, including the HyperX QuadCast.

Since no springs are used here, but simple clamps, the weight is not really relevant - even with heavier studio XLR microphones including a metal spider.

Of course, simply use the appropriate adapter supplied.

The release date is 2021 and I have had it since 20/02/2023 so I don't assume that they have secretly replaced it with version 2.

The arm is not yet available, but you can send a request to Customer Services. They will tell you when it can be delivered.

At 1.5 cm, you can't take the clamp all the way to the edge of the table, it won't be perfectly mounted. I had the same problem with a 1 cm thick metal edge, so I simply took a 1 cm thick piece of wood to widen the metal edge and it held perfectly.

10cm from the desk to the top of the first arm if I understood the question correctly. https://help.elgato.com/hc/en-us/articles/4404864561421-Wave-Mic-Arm-LP-Specifications

Will the RØDE Procaster fit on it or is it too heavy?

No, unfortunately it just doesn't fit.

Yes, the USB cable goes through the arm to hide it (I hope I understood your request correctly). :)

Unfortunately, we do not yet have a delivery date. As soon as this changes, the availability will be automatically adjusted online.

You would have to ask Digitec directly by email or phone. Unfortunately, no one in the community can help you :-/