Bluetti AC180P (1440 Wh, 16 kg)
CHF750.20

Bluetti AC180P

1440 Wh, 16 kg


Questions about Bluetti AC180P

What would you like to know?

Avatar

0 questions and answers

Avatar

3 months ago

Avatar

3 months ago • purchased this product

purchased this product
Helpful answer
Yes, in fact the device comes with a cable for charging via the cigarette lighter. But as the output power of the 12 V socket is only ~120 Watts, you need 10 hours for a full charge (from 0 to 100%). For accelerated recharging, it's better to use the 220 V from a household socket or to fit the vehicle with BLUETTI's Charger 1, which supplies ~500 Watts from the vehicle's alternator.
Avatar

5 months ago

Avatar
digitec

5 months ago

The Bluetti AC180P Powerstation is not waterproof, but is IP65 certified, which means that it is protected against dust and water splashes. However, it should not be operated or stored for long periods in a damp room with around 60% humidity, as this can damage the electronics. Short-term operation at this humidity level is possible, but permanent exposure to moisture is not recommended.
Automatically generated from the .
Avatar

8 months ago

Avatar
digitec

8 months ago

Helpful answer
Yes, you can change the mains charging power via the Bluetti app. Three charging modes are available: silent (approx. 260 W), standard (approx. 1,000 W) and turbo (approx. 1,440 W). These modes allow you to choose between different input powers and charging speeds, but the specific values of 300 W, 200 W or 100 W are not mentioned. The minimum power available is therefore around 260 W in silent mode.
Automatically generated from the .
Avatar

9 months ago

Avatar
digitec

9 months ago

Helpful answer
Yes, you can connect a solar panel directly to the Power Station, as it has an in-built MPPT solar controller that enables direct connection. An additional external solar controller is not necessary; you simply connect the solar panel directly to the DC input (D7909) of the station. The Power Station also charges during operation, i.e. when outputs are supplying power, as long as the solar input power remains within the specifications. The maximum solar input power is 500 W at 12-60 V and a maximum of 10 A, and the station regulates the input currents itself to prevent overload.
Automatically generated from the .
Avatar

10 months ago

Power shift?

Avatar

10 months ago

According to our information, this power station is not equipped with Powershift. The AC180P is equipped with a 1800W inverter and a LiFePo4 battery. For further technical questions, we recommend contacting the manufacturer directly.

12 of 12 questions

To Top