PHS-memory RAM suitable for HP Z600
Z600, 1 x 16GBMore than 10 pieces in stock at third-party supplier
Memory configuration3
Product details
This 16GB RAM is 100% compatible with HP Z600. Note when selecting memory modules: RDIMM memory can only be used from motherboard revision C2 (Intel 5520 chipset) onwards. Here’s how to check if you have a motherboard with a C2 revision: - Start the BIOS setup menu. In the System Information Menu, the Boot Block Date will be displayed. - If the Boot Block Date shows the date 01/07/10, it is a C2 revision. - If the Boot Block Date shows the date 01/30/09, it is a B3-based system. Alternatively, you can use the HP Performance Advisor software. Here, you will find the information displayed under System Configuration and Baseboard ID. - All B3-based systems will show the value: 0AE8h. - The system with the C2 revision will show the value: 0B54h. RDIMM and ECC UDIMM should not be mixed.
RAM buffer | ECC Registered |
Memory type | DDR3-RAM |
Compatible model | Z600 |
Compatible brand | HP |
Memory configuration | 1 x 16GB |
Storage clock frequency | 1333 MHz |
Item number | 24884819 |
Manufacturer | PHS-memory |
Category | RAM Model-specific |
Manufacturer no. | SP462807 |
Release date | 25.3.2023 |
Compatible brand | HP |
Compatible model | Z600 |
Memory configuration | 1 x 16GB |
Hardware application range | Server / Workstation |
Memory type | DDR3-RAM |
Storage clock frequency | 1333 MHz |
Storage capacity (RAM) per module | 16 GB |
Memory chip | LPDDR3 |
Memory form factor | DIMM |
Number of pins | 240x |
RAM buffer | ECC Registered |
Voltage | 1.50 V |
CO₂-Emission | |
Climate contribution |
Length | 15.50 cm |
Width | 5.30 cm |
Height | 0.90 cm |
Weight | 29 g |