Formfutura EasyFix adhesive - No. III for PP

EasyFix No. III is an all-purpose building board adhesive specially developed for employees working with polypropylene filaments.

EasyFix adhesives are designed to bond firmly to a heated building board so that an object adheres firmly to the building board. On the other hand, it also has excellent release properties when the build plate is cold. This makes it very easy to remove a printed object from the build plate, while reducing the risk of damage to the build plate and the printed object.

How to use EasyFix 3D printing adhesives:
There is an EasyFix adhesive solution for 3D printing with fast all types of 3D printer filaments. Shake the bottle of EasyFix well before use. Make sure the build plate of YOUR 3D printer is clean and at room temperature before applying EasyFix to the print bed of YOUR 3D printer. Press the applicator sponge onto the build plate so that the EasyFix 3D printing adhesive soaks the applicator sponge. Allow the EasyFix adhesive to slowly saturate the applicator sponge. Never squeeze the bottle!

When the applicator sponge IS saturated, YOU can begin to apply the EasyFix adhesive evenly to the printable surface of the build plate of your 3D printer. Make sure that the Z-height of your 3D printer is correct before you start 3D printing. The EasyFix adhesive will adhere firmly when your build plate is heated.

Wait until the print platform of your 3D printer is at room temperature before removing your 3D printed object. EasyFix 3D printing adhesives have excellent release properties, so your 3D printed object will detach from the 3D printer build platform as it cools. If it is still difficult to remove the 3D printed object, YOU can apply a small amount of warm water to the printed object and the print surface. Allow the water to creep under the 3D printed object before slowly removing it.

A build platform prepared with EasyFix adhesive can be used for multiple 3D prints.