Extrudr Filament Green-TEC White 3mm 1.1Kg

Green-TEC Filament

Biocomponents (BDP) are made from almost 100% renewable and natural raw materials. The raw materials are CO2-neutral and environmentally safe. The new biomaterials are a non-toxic alternative to conventional ABS, PETG, or PLA filaments and surpass them in terms of temperature resistance, hardness, and elongation. The material properties also exceed those of established 3D printing materials regarding shrinkage and warping, making them suitable for complex and large print objects. The printer does not require a heated print bed.

Application: High-performance applications in the technical field as well as a biological alternative to ABS and PETG. Very high temperature resistance. Regulation: The biopolymer complies with all regulations of the European regulation on food contact.

Properties

• Temperature resistant up to 110-120 degrees
• Very low warping (<0.5%)
• High mechanical strength, resulting in lighter components
• Food safe
• Odorless
• High layer adhesion and good optical properties
• Biodegradable

3D Printing Settings

Maximum print speed in mm/s: 120
Minimum hotend temperature: 200 degrees
Maximum hotend temperature: 230 degrees
Recommended hotend temperature: 215 degrees
Nozzle material: All
Nozzle diameter: 0.25-1.2 mm

First Recommendation

Heated print bed: 35-50 degrees
Adhesion with spray adhesive

Second Recommendation

Without heated print bed
Adhesion with blue tape

Technical Data

Heat resistance: 110 degrees

Diameter
Our filament is of high quality and has very low tolerances.

Typical reference values:

Diameter: 2.85 mm
Tolerance: +/- 0.05 mm

Spool dimensions:

Outer diameter: 20 cm
Width: 6.2 cm
Inner diameter (hole): 5.2 cm.