Extrudr Filament Green-TEC Red 1.75mm 1.1Kg

Green-TEC Filament

Biocompounds (BDP) is produced almost 100% from renewable and natural raw materials. The raw materials are CO2-neutral and ecologically harmless. The new biomaterials are a non-toxic alternative to conventional ABS, PETG, or PLA filaments and are superior to them in terms of temperature resistance, hardness, and elongation. The material properties also surpass established 3D printing materials regarding shrinking and warping, making it suitable for complicated and large print objects. The printer does not require a heating bed.

Application: High-performance application in the technical field as well as a biological alternative to ABS and PETG. Very high temperature resistance. Regulation: The biopolymer complies with all regulations of the European Food Contact Regulation.

Properties

• Temperature resistant up to 110-120 degrees
• Very low warping (<0.5%)
• High mechanical resistance resulting in lighter components
• Food safe
• Odourless
• High layer adhesion and good optical properties
• Biodegradable

3D printing settings

Max pressure in mm/s: 120
Minimum hotend temperature: 200 degrees
Maximum hotend temperature: 230 degrees
Recommended hotend temperature: 215 degrees
Nozzle material: All
Nozzle diameter: 0.25-1.2mm

First recommendation

Heating bed: 35-50 degrees
Adhesion with adhesive spray

Second recommendation

Without heating bed
Adhesion with blue tape

Technical data

Heat resistance: 110 degrees

Diameter
Our filament is high quality and has very low tolerances.

Typical guide values:

Diameter: 1.75mm
Tolerance: +/- 0.05mm

Coil size:

Diameter outside: 20cm
Width: 6.2cm
Diameter inside (hole): 5.2cm.