Extrudr Filament Green-TEC Black 1.75mm 1.1Kg

Green-TEC Filament

Biocomponents (BDP) are made from almost 100% renewable and natural raw materials. The raw materials are CO2-neutral and ecologically safe. The new biomaterials are a non-toxic alternative to conventional ABS, PETG, or PLA filaments and even surpass them in terms of temperature resistance, hardness, and elongation. The material properties also exceed established 3D printing materials regarding shrinkage and warping, making them suitable for complex and particularly large print objects. The printer does not require a heated print bed.

Application: High-performance application in the technical field as well as a biological alternative to ABS and PETG. Very high temperature resistance. Regulation: The biopolymer complies with all regulations of the European regulation on food contact.

Properties:

• Temperature resistant up to 110-120 degrees
• Very low warping (<0.5%)
• High mechanical strength, resulting in lighter components
• Food safe
• Odorless
• High layer adhesion and good optical properties
• Biodegradable

3D Printing Settings:

• Maximum print speed in mm/s: 120
• Minimum hotend temperature: 200 degrees
• Maximum hotend temperature: 230 degrees
• Recommended hotend temperature: 215 degrees
• Nozzle material: All
• Nozzle diameter: 0.25-1.2 mm

First Recommendation:

• Heated bed: 35-50 degrees
• Adhesion with spray adhesive

Second Recommendation:

• Without heated bed
• Adhesion with blue tape

Technical Data:

• Heat resistance: 110 degrees

Diameter: Our filament is of high quality and has very low tolerances.

Typical Reference Values:

• Diameter: 1.75 mm
• Tolerance: +/- 0.05 mm

Spool Dimensions:

• Outer diameter: 20 cm
• Width: 6.2 cm
• Inner diameter (hole): 5.2 cm.