eSUN PLA+ 1.75mm Green 1Kg

PLA Plus green PLA+175G1 from eSun is based on a standard PLA filament. The following properties have been optimised: Brittleness Breaking strength Layer adhesion Flame retardant Odourless when printing eSUN PLA+ is considered by many to be the new standard for PLA printing and also offers you a very good value for money. Not only is it easier to process, but you also produce better 3D printed parts with smooth and clean surfaces. Conclusion: PLA+ is very suitable for beginners and professionals, is easy to print and also offers you good adhesion properties and almost no wrap effect when printing! PLA+ is also a very good alternative to ABS, if something has to be break-proof, e.g. printed children's toys! PLA+ has very good elongation and flexural strength to withstand drops, impacts and breakage due to stretching. When printed, PLA+ also does not produce odours as ABS does. Properties PLA+: Very resistant Easy to print Very good adhesion to the printing board Technical details: Colour: Green Article number: PLA+175G1 Weight Filament: 1Kg Diameter: 1.75mm Tolerance: +-0.05mm Printing temperature: 205-225°C Density: 1.24g/cm3 Melt flow index: 2g/10min Impact strength: 7kJ/m² Elongation at break: 29% Tensile strength: 60MPa Dimensional stability: 52°C Coil size Outer diameter: 20cm Coil width: 6.7cm Inner diameter (hole): 5.3cm Filament weight: 1000g Empty coil weight: 278g Total weight: 1460g Dimensions: 205 x 215 x75mm