EKWB EK-Torque Micro Adapter 90 degree G1/4 inch male to G1/4 inch female - rotatable, Satin Titanium

With the EK-Quantum Torque Micro Rotary Adapter fittings, you can achieve a simple 90° turn with minimal footprint and installation height. With a total height of just 21 mm, Torque Micro Rotaries can reach the most difficult spots where bending would otherwise be impossible. This means it is 10 mm lower than the standard 90° EK-Quantum Torque Rotary Angle fitting.

This Quantum Line adapter piece is CNC-machined from a solid brass rod and protected with a high-quality satin silver finish. The two parts of the fitting are firmly assembled and sealed with high-quality rubber O-rings. The fittings in the EK-Quantum Torque series with a satin titanium finish are intentionally left unpainted on the inside to reduce the degree of potential contaminants in the circuit. This precision manufacturing ensures a satisfying snap fit and a uniform appearance.

As there is no space for conventional knurling, the base of the fitting protrudes through an opening on the top, where a 6 mm hex key must be used for fastening. Once secured, the body of the fitting can rotate freely in both directions. EK recommends using the EK-Loop Multi Hex Key for this application.

A G1/4-inch external thread is screwed into the desired connection, and a fully rotatable joint allows the alignment of the G1/4-inch internal thread in any vertical direction. This enables you to install components in close proximity.

The centerline of the G1/4-inch internal thread is 12.5 mm above the mounting surface. The EK-Quantum Torque Micro Rotary 90-degree angle adapter is compatible with all STC or HDC EK-Quantum Torque fittings and EK-Quantum Torque Micro HDP fittings. The width and overall diameter of the base are 16.5 mm.