EKWB EK-Torque Micro Adapter 90 degree G1/4 inch male to G1/4 inch female - rotatable, nickel

With the EK-Quantum Torque Micro Rotary Adapter fittings, you can achieve a simple 90° turn with the smallest possible footprint and installation height. With a total height of only 21 mm, Torque Micro Rotaries can reach the most difficult spots where bending would otherwise be impossible. This means it is 10 mm lower than the standard 90° EK-Quantum Torque Rotary Angle fitting.

This Quantum Line adapter piece is CNC-machined from a solid brass rod and protected with a nickel coating. The two parts of the fitting are securely assembled and sealed with high-quality rubber O-rings.

Since there is no space for conventional knurling, the base of the fitting protrudes through an opening on the top, where a 6 mm Allen key must be used for fastening. Once secured, the body of the fitting can rotate freely in both directions. EK recommends using the EK-Loop Multi Allen key for this application.

A G1/4-inch external thread is screwed into the desired connection, and a fully rotatable joint allows the orientation of the G1/4-inch internal thread in any vertical direction. This enables you to install components in close proximity.

The centerline of the G1/4-inch internal thread is 12.5 mm above the mounting surface. The EK-Quantum Torque Micro Rotary 90-degree angle adapter is compatible with all STC or HDC EK-Quantum Torque fittings and EK-Quantum Torque Micro HDP fittings. The width and overall diameter of the base are 16.5 mm.