Autarking Battery cable set - 2x 10mm2 - 1.5m, M8 cable lugs

Cable Set - 2x 10mm² with M8 Cable Lugs - 1.5m

Flexible, finely stranded DC cable for connecting DC high-current consumers such as inverters, converters, MultiPlus combination devices, anchor winches, etc., as well as for connecting DC high-current chargers, solar charge controllers, or charge boosters.

These cables are pre-assembled to length and have crimped cable lugs with M8 mounting holes at the ends. The cable lugs are equipped with heat shrink tubing.

The flexibility is similar to SGF cable, although the insulation material differs.

When connecting, ensure good contact of the cable lugs on the contact surface. Do not use washers or nuts between the contact surfaces.

Please refer to our tip "Correct Cable Lug Connection."

Specifications:

Cable cross-section: 10mm² battery cable

Standard: GB/T 5023.5-2008

Conductor structure:

Copper wires: 198 pieces

Copper wire outer diameter: 0.25±0.002mm

Conductor type: OFC (Oxygen-Free Copper)

Conductor resistance at 20°C (MΩ/km): ≤0.0056

Insulation:

Insulation material: Rubber and plastic 105℃

Rated voltage: 450/750V

Insulation outer diameter: 6.6±0.1mm

Average diameter: 1.2mm

Minimum thickness: ≥0.8mm

Flame retardant standard: FT-1

Anti-UV: Yes

Operating temperature range: -40°C to +105°C

Color: red & black

Appearance: No impurities, no scratches, smooth, round

Environmental testing: ROHS (no Pb, Cd, Hg, Cr+6, PBBs, PBDEs)

Voltage testing of the finished product: Soak in water for 1 hour at room temperature, apply 1.5kV voltage for 5 minutes, no breakdown

Impulse test: 6kV

Burn test: -.