The Raspberry Pi B+ has landed on the Maker World like a 40-GPIO
pinned, quad-USB ported, credit card sized bomb of DIY joy. And while
you can use most of our great Model B accessories by hooking up our
downgrade
pinned, quad-USB ported, credit card sized bomb of DIY joy. And while
you can use most of our great Model B accessories by hooking up our
downgrade
cable, its probably a good time to upgrade your set up and
accessorize using all of the Model B+'s 40 pins.
That's why we now carry the Adafruit Pi T-Cobbler Plus - Breakout +
Cable for Raspberry Pi B+. This Cobbler is in a fancy T-shape, which
is not as compact, but is a little easier to read the labels.
The T-Cobbler Plus is an add on prototyping board from Adafruit
specifically designed for the B+ that can break out all those tasty
power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless
breadboard. This set will make "cobbling together" prototypes with the
Pi super easy.
The Pi T-Cobbler Plus kit comes with a 40 pin ribbon cable, a
T-cobbler PCB, a 40-pin GPIO socket, and some male header strips.
Once soldered, you can plug the 40-pin GPIO cable between the Pi
computer and the T-Cobbler breakout. The T-Cobbler can plug into any
solderless breadboard (or even a prototyping board like the
PermaProto). The T-Cobbler PCB has all the pins labeled nicely so you
can go forth and build circuits without keeping a pin-out printout at
your desk. We think this will make it more fun to expand the Pi and
build custom circuitry with it.
Designed for use with Raspberry Pi Model B+ only and requires some
soldering!
The Raspberry Pi B+, solderless breadboard, breadboarding wires,
cables, components, power supply, etc are not included! We do stock
many of those items in the shop, so check those out as well!
PCB Dimensions:
* 73mm x 20mm x 2mm / 2.9" x 0.8" x 0.08"
* Width at top of T: 58mm / 2.3"
* Weight: 7g
Assembled Dimensions:
* 73mm x 20mm x 11mm / 2.9" x 0.8" x 0.4"
* Height with pins: 19mm / 0.8"
* Width at top of T: 58mm / 2.3"
* Weight: 14g
accessorize using all of the Model B+'s 40 pins.
That's why we now carry the Adafruit Pi T-Cobbler Plus - Breakout +
Cable for Raspberry Pi B+. This Cobbler is in a fancy T-shape, which
is not as compact, but is a little easier to read the labels.
The T-Cobbler Plus is an add on prototyping board from Adafruit
specifically designed for the B+ that can break out all those tasty
power, GPIO, I2C and SPI pins from the 40-pin header onto a solderless
breadboard. This set will make "cobbling together" prototypes with the
Pi super easy.
The Pi T-Cobbler Plus kit comes with a 40 pin ribbon cable, a
T-cobbler PCB, a 40-pin GPIO socket, and some male header strips.
Once soldered, you can plug the 40-pin GPIO cable between the Pi
computer and the T-Cobbler breakout. The T-Cobbler can plug into any
solderless breadboard (or even a prototyping board like the
PermaProto). The T-Cobbler PCB has all the pins labeled nicely so you
can go forth and build circuits without keeping a pin-out printout at
your desk. We think this will make it more fun to expand the Pi and
build custom circuitry with it.
Designed for use with Raspberry Pi Model B+ only and requires some
soldering!
The Raspberry Pi B+, solderless breadboard, breadboarding wires,
cables, components, power supply, etc are not included! We do stock
many of those items in the shop, so check those out as well!
PCB Dimensions:
* 73mm x 20mm x 2mm / 2.9" x 0.8" x 0.08"
* Width at top of T: 58mm / 2.3"
* Weight: 7g
Assembled Dimensions:
* 73mm x 20mm x 11mm / 2.9" x 0.8" x 0.4"
* Height with pins: 19mm / 0.8"
* Width at top of T: 58mm / 2.3"
* Weight: 14g
Compatible hardware | Raspberry Pi |
Item number | 5998556 |
Manufacturer | |
Category | |
Manufacturer no. | ada-1989 |
Release date | 8/24/2014 |
Compatible hardware | Raspberry Pi |
Module type | Electronics kit |
Length | 14 cm |
Width | 10 cm |
Height | 1 cm |
Weight | 36 g |
Specifications may include unverified machine translations.