You're not connected to the Internet.

Description

If you've been diggin' our monochome OLEDs but need something bigger,
this display will delight you. These displays are 2.3" diagonal, and
very readable due to the high contrast of an OLED display. This
display is made of 128x32 individual blue OLED pixels, each one is
turned on or off by the controller chip. Because the display makes its
own light, no backlight is required. This reduces the power required
to run the OLED and is why the display has such high contrast; we
really like this graphic display for its crispness!

The driver chip, SSD1305 can communicate in three ways: 8-bit, I2C or
SPI. Personally we think SPI is the way to go, only 4 or 5 wires are
required and its very fast. The OLED itself requires a 3.3V power
supply and 3.3V logic levels for communication. We include a
breadboard-friendly level shifter that can convert 3V or 5V down to
3V, so it can be used with 5V-logic devices like Arduino.

The power requirements depend a little on how much of the display is
lit but on average the display uses about 50mA from the 3.3V supply.
Built into the OLED driver is a simple switch-cap charge pump that
turns 3.3V into a high voltage drive for the OLEDs.

Each order comes with one assembled OLED module with a nice bezel and
4 mounting holes. The display is 3V logic & power so we include a
HC4050 level shifter. We also toss in a 220uF capacitor, as we noticed
an Arduino may need a little more capacitance on the 3.3V power supply
for this big display! This display does not come with header attached
but we do toss in a stick of header you can solder on. Also, the
display may come in 8-bit mode. You can change modes from 8-bit to SPI
or I2C with a little soldering

Getting started is easy! We have a detailed tutorial and example code
in the form of an Arduino library for text and graphics. You'll need a
microcontroller with more than 512 bytes of RAM since the display must
be buffered. The library can print text, bitmaps, pixels, rectangles,
circles and lines. It uses 512 bytes of RAM since it needs to buffer
the entire display but its very fast! The code is simple to adapt to
any other microcontroller.

Technical Details

* Screen Dimensions: 2.5" x 1.1" x 0.2" / 64mm x 28mm x 5mm
* Screen Weight: 18g
* Uses I2C address 0x3C or 0x3D … more

Specifications

Click 'show more' to display specifications.

General information

Manufacturer Adafruit
Product type Electronics modules
Item number5998590
Manufacturer no.ada-2675

Please click directly on the incorrect data to access the registration form.

Alternatively, you can register a generic error report (wrong picture, unsuitable accessories, etc.)

Cancel

Report incorrect data

Correction suggestion

Comment

Report incorrect data

If you wish to learn more about this product, please visit the manufacturer's website or contact us: digitec@digitec.ch

Returns and warranty

Warranty 24 month Bring-in
30-day right of return
i

30-day right of return

This product may be returned within 30 days after shipment or collection. A minimum of 10% will be deducted from opened products. Unfortunately, we cannot accept a product if it is damaged, incomplete or missing its original packaging.

Returns and warranty

Please use our simplified returns and warranty process to return a product or register a warranty case. Returns and warranty

Please use our simplified warranty process to view the warranty period as well as any warranty extensions you may have purchased. This will ensure that your return or warranty case is processed quickly and effectively.

Availability

Mail delivery

 Expected delivery time: approx. 6–8 days
Currently > 5 piece(s) in stock at the supplier

Collection

All locations

 Expected delivery time: approx. 6–8 days
Currently > 5 piece(s) in stock at the supplier

If ordered immediately.
Information subject to change.

Customer questions and answers

No questions so far.

Do you have a question? Ask the digitec community.

Ask a question

500 / 500 characters

Customer ratings

This product has not yet been rated.

Have you tested this product? Share your opinion with the digitec community.

(0)
Rate product
Adafruit Monochrome 2.3" 128x32 OLED Graphic Display Module Adafruit Monochrome 2.3" 128x32 OLED Graphic Display Module