CHF26.50
Steffen Timer Digi
Type 13
Question about Steffen Timer Digi
Is it possible to programme the countdown once (say 90min) and then let it run like this every now and then as needed without having to reprogramme? In the meantime, the normal timer programme should run. Specifically, the unit should then serve the following purpose. I would like to have an air dryer always run automatically for 1h in the morning and 1h in the evening. Sometimes, however, it would be good if I could run the dryer for 90min during the day, e.g. when I have hung up laundry. I don't want to have to reprogram the countdown every time, but I would prefer to be able to change it at the touch of a button. When the countdown is finished, the appliance should run with the timer again.
Helpful answer
Hello - Yes, this is possible. If 90 min. contdown is programmed, you can run the contdown with the HOUR and MIN buttons together. Afterwards, the timer programme automatically continues as normal.
To get to the Contdown menu, you have to trudge through all 20 on/off switching times, i.e. press the SET key for a long time or 40 times! However, once programmed to e.g. 90 min, this value remains.
To call up and start the CTD (Contdown) preset, you only have to press the HOUR and MIN keys together. The same key combination can also be used to switch the contdown off again; the MANUAL key stops it and switches it on again. Contdown can be programmed in minute increments, from 1 min. to 23 h 59 min.
When the contdown is running, it has priority, even if on-off programming would be due during this time.
After the contdown has elapsed, it switches the connected unit off and the timer programming becomes active automatically,
if the display shows AUTO in the upper left corner. The MANUAL button can also be used to switch the unit on and off manually.
Hello - yes, this is possible. See also chapter 6 in the Digitec manual: https://static.digitecgalaxus.ch/Files...