CHF26.70
Creality Filament PLA+
PLA, 1.75 mm, 1000 g, Black
Question about Creality Filament PLA+
Hello I have a problem the layers separate with filament PLA+ ? the recommended temperature does not work even above 230-235 the layers separate, I do not mean that 3D model separates from glass but 3D model, for example cylinder at 100% filling at 1 cm diameter you can simply break you can simply peel off individual layers by hand, I have tried other PLA and everything works. Does anyone have any idea what it can be excluded, temperature, nozzle distance, quality, I have already tried everything Thank you
Helpful answer
Hello Andi.
With my Ender 3 V3 se I run the filament at 200°C hotend and plate at 60°C. Layer thicknesses at 0.2-0.1mm.
I get good results even at speeds of 250mm/s.
One possibility is that the filament has absorbed moisture. I would try drying it once.
Hello Andi
I have the Ender-3 S1 Pro as a printer.
With the Creality Filament PLA+ I set the nozzle temperature to 200 degrees, the print bed temperature to 60 degrees and the fan control to 100%.
Infill density and pattern (filament inside) to 20% with triangle pattern.
Good results were achieved with these settings.
HI Andi, is the printer in a covered environment so that the temperature keeps warm during the printing? Otherwise it might be that this PLA+ material is not suitable for that kind of printing.