CHF1899.–
Jackery Explorer 2000 Pro
2160 Wh, 19.50 kg
Question about Jackery Explorer 2000 Pro
Are non-jackery solar panels also compatible with this power station? For example: https://www.digitec.ch/de/s1/product/goal-zero-nomad-200-200-w-solarpanel-14652000. Do I need any adapters? Thank you!
Let me quote:
You need this special "Jackery plug" (note DC8020) and can then connect any solar panel with an output voltage between 12 and 30V to it via a 2-pole cable (it says in the operating instructions).
A charge control in the form of an MPPT controller is integrated into the station.
In order to answer the initial question, I suggest that you obtain a suitable plug (preferably with two strands) and adapt the cable to the lines of the solar panels.
I will refrain from explaining the methods, i.e. how to safely connect 2 cables with each other ...
Oh yes ... In the FAQ on the manufacturer's website, there is a specific question: "Can I use a solar panel from another manufacturer?
and also the answer:
The Jackery Powerstation can be charged with a third-party solar panel, but it must meet the following conditions, e.g. replacement of the E1000.
1. the voltage must be between 12 and 30 V
2. the connector size: outer diameter 7.9 mm, inner diameter 5.5 mm, inner pin diameter 0.9 mm (empty).
just that ...
You need this special "Jackery plug" (note DC8020) and can then connect any solar panel with an output voltage between 12 and 30V to it via a 2-pole cable (it says in the operating instructions).
A charge control in the form of an MPPT controller is integrated into the station.
In order to answer the initial question, I suggest that you obtain a suitable plug (preferably with two strands) and adapt the cable to the lines of the solar panels.
I will refrain from explaining the methods, i.e. how to safely connect 2 cables with each other ...
Oh yes ... In the FAQ on the manufacturer's website, there is a specific question: "Can I use a solar panel from another manufacturer?
and also the answer:
The Jackery Powerstation can be charged with a third-party solar panel, but it must meet the following conditions, e.g. replacement of the E1000.
1. the voltage must be between 12 and 30 V
2. the connector size: outer diameter 7.9 mm, inner diameter 5.5 mm, inner pin diameter 0.9 mm (empty).
just that ...
Using solar panels from other brands is not recommended for technical reasons, according to the manufacturer. It is therefore not advisable.