Best selling Dashcam accessories
Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.
1. Viofo HK4 hardwire kit
The Viofo HK4 Hardwire Kit is a practical solution for powering dashcams, particularly for the A229, A119 MINI, and T130 models in 2-channel and 3-channel configurations. This kit allows for a direct connection to the vehicle's battery, ensuring that the dashcam remains operational even in parking mode. With the automatic activation of the parking mode function that responds to the ACC signal, it guarantees that the dashcam records even when the vehicle is parked. The HK4 Hardwire Kit also offers four adjustable voltage options to protect the vehicle's battery from discharge. The right-angle TYPE-C USB connector facilitates installation and ensures tidy cable management. With an operating voltage of 12-24V, the kit is versatile and suitable for a variety of vehicles. It provides a reliable and efficient solution for continuously powering the dashcam while preserving the vehicle's battery.
2. Viofo CPL-100 filter for A119 series and A129 series models
Circular-Polarizing Filters (CPL) > Works with VIOFO A139/ T130 Dash Camera > it could further reduce the reflections from windshield, getting more saturated and beautiful video.
3. 70mai UP04
70mai 4G Hardwire is a power supply kit (12/30 V) designed to connect the Omni dash camera directly to the car's fuse box and establish an internet connection via a SIM card (not included). With this kit, you can utilize various features such as collision and AI motion detection, parking mode, and even GPS and ADAS (Advanced Driver Assistance System). The 4G Hardwire Kit allows you to easily monitor your vehicle remotely using the 70mai app. In the event of a potential break-in or collision, the dash camera automatically records the scene, and the app promptly notifies you with a message. If the car battery voltage is low (11.4 V for small vehicles and 22.8 V for large vehicles), the controller automatically cuts off the power supply to ensure sufficient battery capacity for starting and to prevent battery failure. It is easy to install, compatible with the 70mai Omni Dashcam, offers parking monitoring 24/7, GPS and ADAS features, and requires an internet connection (with a SIM card, not included). A 3-meter cable is included.
4. Kenwood CA-DR1030
This connection cable for the dashcams DRV-A501W, DRV-A301W, DRV-A201 and DRV-A100 allows the fixed installation in the car, so that the camera is activated when the G-sensor is triggered in parking mode (e.g. by a "parking bumper"). With the optional connection cable CA-DR1030 for fixed installation, the compatible dashcams DRV-A100, DRV-A201, DRV-A301W as well as DRV-501W are extended with the parking mode. The integrated G-sensor of the dashcam then triggers a recording backup in the event of a parking bump. Thanks to the video recording, it is then possible to find out how the incident occurred.
5. Viofo CPL-300 filter for A229 series rear cam
The CPL-300 filter from Viofo is specifically designed for the rear camera of the A229 series dashcam. This accessory significantly improves image quality by reducing reflections and enhancing contrast. By using this filter, colors become more saturated, and the video recordings achieve a more appealing aesthetic. The filter features a multi-layer coating that makes it scratch-resistant, fingerprint-resistant, antistatic, and oil- and water-repellent. These properties help ensure the filter's durability and optimize image quality under various conditions. Therefore, the CPL-300 filter is a valuable addition for anyone looking to maximize the performance of their dashcam.
6. Nordval PMPC03 Parking mode power supply kit USB-C
Parking mode recording. Thanks to the Nordväl PMPC03 Power Kit USB-C for the DC202-2CH, you can continue recording in parking mode without the risk of running out of battery. The desired cut-off voltage value can be easily set.
In parking mode, you can choose from various recording options, such as bump detection, motion detection and time-lapse recording. The dashcam records continuously or starts when motion or an impact is detected. As soon as the vehicle is switched off and the Nordväl dashcam is recording in parking mode, the PMPC03 Power Kit checks the voltage level of the car battery. If the voltage falls below the specified value, the PMPC03 automatically switches off the power supply to prevent the car battery from discharging. You simply connect the kit to the vehicle's fuse box and select the desired cut-off voltage.
This power supply kit is suitable for both 12 volts and 24 volts.
Cut-off voltage options:
For 12 volt batteries: The protection voltages are 11.6 V, 11.8 V, 12.0 V and 12.2 V. 11.8 V is recommended for most users under general driving conditions.
For 24 volt batteries: The protection voltages are 23.2 V, 23.6 V, 24.0 V and 24.4 V. 23.6 V is recommended for most users under general driving conditions.
The hardwire kit automatically recognises the type of lead-acid battery (12 V or 24 V) and protects your battery against discharge. The PMPC03 automatically recognises the voltage level of the battery.
Scope of delivery: Nordväl PMPC03 parking mode power supply kit USB-C, 3M adhesive tape, user manual.
Specifications:
Cable length: 3.5 metres
Current voltage: 12 volts and 24 volts
Output: 5 volts / 3 amps
Voltage monitoring at: 11.6 volts and 23.2 volts.
7. Viofo CPL-200 filter for A229 and A329 series front cam
8. Botslab Hardwire Kit for Dash Cam HK30 Pro / G300H / G980H
Hardwire Kit Botslab for Dash Cam HK30 Pro / G300H / G980H - Black. Ensure continuous protection for your car with the Botslab Hardwire Kit,
specially designed to work seamlessly with Botslab Dash Cam models HK30 Pro, G300H, and G980H.
This kit provides reliable power management, preventing battery drain while keeping your dash cam operational around the clock.
This Botslab Hardwire Kit is the perfect solution for those who want uninterrupted security for their vehicles,
whether parked or in motion, with easy installation and hassle-free power management.
2.74m Long Cable for flexible and easy installation in any car, truck, or SUV. Voltage Range: DC12V-30V, making it compatible with a wide range of vehicles.
Output Voltage: 5V/2.4A, providing ample power to keep your dash cam running smoothly.
Equipped with Under-Voltage Secure Protection, the hardwire kit ensures your vehicle’s battery is protected from drain,
cutting power to the dash cam when the voltage gets too low.
Compatibility: Botslab Dash Cam HK30 Pro, Botslab Dash Cam G300H, Botslab Dash Cam G980H
- Cable Length: 2.74m
- Voltage Range: DC12V-30V
- Output Voltage: 5V/2.4A
- Power Modes: Parking Mode: Time-lapse recording
Driving Mode: Normal recording
- Battery Protection: Prevents battery drain
Under-Voltage Secure Protection
Connection: MicroUSB
9. 70mai Hardwire Kit UP03
This power cable allows you to continuously power the dashcam without starting your vehicle. In this way, you can fully utilize the functions of guarding and protecting your vehicle, even when parked. Enjoy 24-hour protection for your parked vehicle. The camera can record 24/7 by connecting the cable to the fuse box instead of the ignition.
The product is intended for advanced users.
Compatible with models:
- Dash Cam A810
- Dash Cam M500
- Dash Cam Omni
Package contents:
- Power cable
(Note: Terminals for connecting to the fuse box are not included.)
Technical specifications:
- Output voltage: 5V
- Output current: 2.4A
- Low voltage protection for small cars: 11.8V
- Cable length: 3m.
10. DDpai Adapter zasilania Hardwire Kit USB-C
The DDPAI Hardwire Kit USB-C is a powerful adapter specifically designed for dashcams. It provides continuous power supply, ensuring that your dashcam is operational 24/7 even in parking mode. With support for ACC+ technology and advanced safety features, this adapter protects both the dashcam and the vehicle's battery. Installation is straightforward, and the adapter is compatible with various vehicle types. The DDPAI Hardwire Kit USB-C is the ideal solution for anyone who takes vehicle safety seriously and wants to ensure that all incidents are recorded.
- 24-hour monitoring through time-lapse recording in parking mode
- Protection for the dashcam and vehicle battery with 5 levels of safety features
- Easy installation in various vehicle types
- Compatible with multiple DDPAI dashcam models
- Package includes all necessary adapters and a user manual.
Product order
See all products