Top-rated products in the Relays category
Here's a ranking of the top rated products in this category. To give you a quick overview, we've also added some key information about the products.
1. Shelly Per 1PM
Detail color: Red, Product type: Switch actuators, Protocol: WLAN, System communication: Wireless, System compatibility: Google Assistant, Amazon Alexa.
2. Hager Staircase lighting timer
Staircase lighting time switch EMN001
Staircase lighting timer with low switching noise. To switch on the
Lighting. Automatic recognition of the 3 or 4 wire connection, can be switched on subsequently. Hand switch on
Device - automatic or permanent lighting.
3. Finder Interposing relay , 12A 1 NO, 230vac
Coil voltage = 230V ac
Contact arrangement = 1-pole normally open contact
Switching current = 12 A
Connection Type = Screw
Series = 13 Series
Switching voltage AC max. = 400V ac
Application Type = Intermediate lighting circuit
Length = 37mm
depth = 22.7mm
height = 39mm
Dimensions = 37 x 22.7 x 39mm
Life = 70000 cycles (electrical)
Series 13,31 - electromechanical monostable relays. Intermediate monostable relay series 13.31, switch box 1-pole mounted. Can be mounted behind blind plates, as is common practice in home wiring 1 NO contact (SPST-NO) For mounting in home switch boxes Cadmium-free contact material.
4. Hager Installation contactors 25A 1S+1Ö 230V
Hager contactors 25A 1S+1Ö 230V.
5. Hager Power relay
Remote switch 1 NO contact 230V AC 16A 1PLE
Remote switch for pulse control in accordance with EN60669-1 and EN60669-2-2 as well as finger-safe in accordance with BGVA2. With
contact position indicator, manual operation, labelling option directly on the device and suitable for retrofitting additional
retrofitting of additional equipment.
6. Hager Contactor
Hager contactor ESC425S.
7. Eltako ER12-002-UC
8. Hager Remote switch EPS410B
Hager remote switch EPS410B.
9. Eltako Time relay Current relay. 1 changeover contact potential free 16A/250V AC
Modular device for mounting on mounting rail (1 TE). To do this, simply connect the N conductor to the terminal (N) and L to 1 (L). This results in an additional stand-by consumption of only 0.1 Watt. If the contact is used to control switching devices which themselves do not switch in zero-crossing, (N) should not be connected, as the additional closing delay will otherwise have the opposite effect. With an internal toroidal current transformer, the alternating current of 0.1A up to a maximum of 32A flowing through a consumer V1 is compared with the set value and, if this is exceeded, a relay switches off a consumer V2 connected to 2 or switches on a consumer V3 connected to 3 within 0.5 seconds. Setting accuracy ±5%. From 25A the relay always switches on. State-of-the-art hybrid technology combines the advantages of wear-free electronic control with the high performance of special relays. The current base A is set with the lower latching rotary switch A.
10. Miocar Universal relay
0 - 1 / 12V 40 Amp.
