Top-rated products in the Electronics supplies + Casing category

Here's a ranking of the top rated products in this category. To give you a quick overview, we've also added some key information about the products.

1. Argon One M.2

The Argon One Case is one of the most ergonomic and aesthetically pleasing cases for the Raspberry Pi. Made of aluminum alloy and polished with a gray finish, the case makes the Raspberry Pi look modern, sleek and stylish. Its minimalist design keeps cables in one area and provides excellent cooling with properly placed vents.

The aluminum alloy case not only makes the Pi look cool, but also cools it perfectly. The case has an extension that connects to the processor with a thermal cooling pad, so heat is transferred from the processor to the case. This means that the case becomes a heat sink that passively cools the Raspberry Pi, allowing the Pi to work without building up much heat. In addition, the case comes with an integrated PCB with a fan that also actively continues to cool. These two cooling systems combined provide long-lasting operation without overheating. The fan speed can be configured at any time via the terminal, as well as the conditions for a passive change of the fan speed.

The case includes a top and bottom panel, 4 screws, a built-in PCB, a silicone cooling pad, and a PCB that extends the audio and micro HDMI connectors. Assembling the parts is simple and intuitive. All that is needed is a Phillips screwdriver to tighten the screws at the bottom of the case. No special tools are required. After assembling the Raspberry Pi and installing the operating system on the SD card, a one-line script must be entered into the terminal to use the power switch and fan.
 

2. Housing

The housing is made of an aluminium alloy and is polished grey. It gives minicomputers a modern, elegant and stylish look and easily attracts users to computers. The minimalist design keeps the cables in one area and provides excellent cooling through properly placed ventilation holes. The aluminum alloy case not only makes the computer look cool, but also keeps it cooler. The case has an extension that connects to the processor with a thermally conductive adhesive, so heat is transferred from the processor to the case. This means that the case becomes a heat sink that passively cools the motherboard, allowing the computer to run without a lot of heat generation. To complete the picture, the case comes with a built-in PCB with a fan to actively cool the computer. These two cooling systems together ensure a long term use without overheating. The fan speed can be configured at any time via the terminal as well as the conditions for a passive change of the fan speed. 

3. Retroflag GPi Case

Safe shutdown, 3.5mm audio connector, LED power indicator, 2.8" IPS screen. Compatible with Raspberry Pi ZERO, ZERO W.

4. Berner Torantriebe BETO BHS140 Midi hand-held transmitter, 868 MHz, 4-channel

Hand-held transmitter - 4 channel Bluefamily fixed code, unidirectional, 868 MHz
Incl. ring eyelet, wall and clip holder Size 40x70x14 mm Not programmed

5. Icy Box Stackable case for Raspberry Pi 2, 3 and 4

RaidSonic ICY BOX IB-RP406 - Cover - steel, acrylic - transparent.

6. Play-Zone heat sink kit

This is an aluminum heatsink kit used for cooling the chips on Raspberry Pi. Comparing to other heat sink, it has been attached with thermal conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently. Besides, the installation is simple, what you need to do is to remove the heatsink protection and stick it on Raspberry Pi. 

7. Donau Luster terminal Pluggable

Each with 12 poles made of polyamide 6 natural for clamping ranges 2.5 mm. Inserts chromated brass, screws M 3 chromated steel. Short-term temperature load 150°C, leakage current resistance according to IEC 112:CTI-M>600 (luster terminals pluggable = plug part + coupling part). 

8. InLine 8-pack IC cooler

Passive heat sink for small IC chips etc. Protect your components from overheating. The individual heatsinks are already equipped with self-adhesive thermal pads. Dimensions (LxWxH): 14 x 14 x 6 mm. Quantity: 8 pieces. 

9. Raspberry Pi Raspberry Pi Enclosure Type B+ / 2 / 3

Housing MC-RP002-CLR for Raspberry Pi B+, plastic, colour: transparent, for B+ version of the Raspberry

Plastic, colour: transparent, for B+ version of the Raspberry,

10. Pimoroni Fan SHIM

Fan This fan can be controlled by software in such a way that it is only switched on or off automatically when a certain temperature is reached. The switch can also be programmed to be used either as an on/off switch or to switch between temperature controlled and manual mode.