Best Thomas & Betts products in the Relays category
On this page you'll find a ranking of the best Thomas & Betts products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Thomas & Betts Schütz
2. Thomas & Betts MC1A310AT6
The mini contactor is a dimension-optimized 4-pole contactor with screw terminals. This device is an excellent solution when high performance is needed but space is limited. Mini contactors are used in residential buildings, commercial buildings, and industrial applications for the control of single or three-phase loads up to 4 kW (AC-3) and 20 A / 690 V (AC-1) or for switching control signals. The product is suitable for wall or rail mounting.
3. Thomas & Betts MC1A400AT1
The mini contactor is a dimension-optimized 4-pole contactor with screw terminals. This device is a great solution when high performance is needed but space is limited. Mini contactors are used in residential buildings, commercial buildings, and industrial applications for the control of single or three-phase loads up to 4 kW (AC-3) and 20 A / 690 V (AC-1) or for switching control signals. The product is suitable for wall or rail mounting.
4. Thomas & Betts Hilfsschütz
5. Thomas & Betts NSL31ES-81 Auxiliary contactor 24V
6. Thomas & Betts Soft starter
The softstarter PSE45-600-70 has a rated maximum operational current of 45 A with an operating voltage span from 208 to 600 V AC. The rated control voltage is between 100 and 250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has a built-in bypass for easy installation and energy saving. A RUN, TOR, and event signal is available from a relay output in normally open state. The PSE has functions such as current limit, kickstart, analog output, end of line, underload, and locked rotor protection. To interact with PSE, it has an illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general-purpose softstarter. It’s a perfect balance between high starting capacity and cost efficiency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18 to 370 A. Typical applications include pumps, fans, compressors, and conveyors.
7. Thomas & Betts TRM toroidal converter, modular 29 mm, 2CSM029000R1211
ABB Stotz S&J Ring Core Transformer TRM
Manufacturer: ABB Stotz S&J
Designation: Ring Core Transformer
Type: TRM
Design: Through-Passing Current Transformer
Primary Rated Current In: 200 A
Secondary Rated Current: 5 A
Secondary Rated Power: 5 VA
Overcurrent Limiting Factor: FS 5
Calibrated: yes
With Touch Protection: yes
Height of Opening: 58 mm
Opening Width: 58 mm
Opening Diameter: 18 mm
Snap Mounting: yes
With Copper Busbar: yes
Secondary Connection: Plug Connection
Number of Primary Inputs: 1
ABB Stotz S&J Ring Core Transformer TRM: additional details
Differential current relays RD2 or RD3 can measure and detect leakage currents or fault currents to ground with a ring core transformer TR and can disconnect with a suitable protective device (e.g., circuit breaker) if necessary.
8. Thomas & Betts ABB circuit-breaker
9. Thomas & Betts ASL09-30-01S-81 Schütz 24V
10. Thomas & Betts Kleinschütz
