
Best Amewi products in the RC helicopter category
On this page you'll find a ranking of the best Amewi products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Amewi Lama
RC Helicopter LAMA with LCD remote control 4 channel, 2.4 GHz
The Amewi LAMA helicopter is a scale replica of the famous SA-315 Lama helicopter from French manufacturer Aérospatiale. With its characteristic lattice tube frame construction, this lightweight multi-purpose helicopter was designed specifically for use in high, hot environments and held the absolute altitude record for many years. Quite a few Lama helicopters are still in service today, especially in Switzerland.
In the new V2 version, this 4-channel single-rotor helicopter impresses with its state-of-the-art technology in conjunction with the new auto-start/landing system, which can be switched on at the touch of a button on the transmitter. Very inherently stable in the air, flying is also made very interesting for beginners. Due to the powerful motor and the unique, special design, the LAMA can be flown outdoors even in light winds without any problems. The four channels allow the pilot to perform good, clean and beautiful flight maneuvers. The precise servo control of the swashplate and the different flight phases of the model also realize a faster forward flight. The 2.4GHz radio technology of the latest generation allows a range of up to 100 meters outdoors.
Highlights:
Auto take-off/landing at the touch of a button on the transmitter
Scale construction with many details like the original
Mode-1 and Mode-2 control switchable at the transmitter
Other features:
New remote control system with state-of-the-art technology
LED lighting
Long flight time of approx. 8 minutes
Very good workmanship and high quality material
Technical data:
Fuselage length: 425mm
Fuselage width: 95mm incl. landing gear
Height: 170mm
Rotor diameter: 400mm
Tail rotor diameter: 128mm
Main material: plastic
Weight ready to fly: approx. 320g incl. battery
Remote control: 2.4GHz, 8 channels, Mode-2 (Mode-1 switchable)
Frequency band from 2.405 to 2.475MHz, 18dBm
Range: approx. 100m
Servos: 2x mini servo
Battery: Li-Po, 2S, 7,4V, 840mAh, 20C, softcase, BEC connector system, LxWxH: 55x30x16, 48g
Flight time: approx. 6 to 8 minutes
Charger: USB charging cable with 1.3A output
Charging time: approx. 30 to 40 minutes
Scope of delivery:
Model
Transmitter
Battery
Charging cable
Spare blades front/rear
Screwdriver
Manual DE/EN
Required accessories:
6x 1.5V AA batteries for transmitter.

2. Amewi Trix 3-in-1 Drone
Type of drive: Electric Brushed, Model type: RTF (Ready to Fly), Range of application: Fun, Required for completion: Batteries for transmitter, Difficulty: 1st beginner, Capacity watt-hours: 1.295 Wh.

3. Amewi AFX-105
The AFX-105 is a faithful replica of one of the most famous helicopters - the Bölkow Bo 105. The newly designed 4-blade rotor head is controlled by a precise stabilization system and gives the model a completely new control feel thanks to Auto Start and Auto Landing. Thus it is now also possible for beginners to control a multi-blade helicopter without great prior knowledge. By pressing a button on the handy 2.4 GHz transmitter with metal sticks, the model can be launched effortlessly to a certain base altitude. There the model remains (hold altitude mode) and the model pilot can thus concentrate on the essential functions of the helicopter, without having to pay attention to the altitude. The gyro system also controls the tail rotor in the background and keeps the model stable in the air. For more agility in flight, the model has 3 speed levels (dual rate), which are equally interesting for beginners and advanced pilots. Thus, the model is also suitable for outdoor (in calm conditions) and reaches high speeds in forward flight. For landing, the start / landing button on the transmitter can be pressed again and the model sinks gently to the ground. The motor has soft start and soft cut. This means that during takeoff, the rotor turns slowly, preventing the model from spinning on its own axis. The same is true during landing, the rotor coasts down smoothly and the motor is automatically shut off. As an additional safety feature, the heli has a voltage monitor that permanently checks the battery in flight. When the base voltage is reached, the LED in the heli starts flashing, signaling to aim for landing as soon as possible. If the pilot does not react, the system lands the helicopter automatically to protect the battery.

4. Amewi AFX4
The AFX4 is perfect for the entry into the world of helicopter flying. Thanks to its inherently stable flight characteristics, this great model is also suitable for the transition from coaxial helicopters. The AFX4 is delivered with the common mode 2 (throttle left) assignment, so that the vast majority of pilots do not need to make any further changes. Due to the integrated 6-axis gyro and the way limiting of the servos, the model can be controlled very well and allows a very stable hovering flight. In addition, the model is self-stabilizing. The radio remote control has an additional button to bring the heli back to a stable starting position (hover mode). The pitch and roll movements (forward / backward, right / left) are regulated by the manufacturer in such a way that they do not pose any major difficulties for a novice pilot. Should a little more power be required, e.g. outdoors in stronger winds, a dual rate switch on the transmitter provides more servo travel to assist. With a little practice very smooth and fast to move, this helicopter is wonderful as a training model for smaller spaces or halls. The flight time varies depending on the environment between 4 - 6 minutes.

5. Amewi AFX4 XP
A perfect helicopter for the entry into the world of helicopter flying. Thanks to its inherently stable flight characteristics, this great model is perfect for the transition from coaxial to single-blade helicopters. The AFX4 is delivered with the common mode 2 (throttle left) assignment, so that the vast majority of pilots do not need to make any further changes. At the push of a button (see instructions) the model can also be switched to Mode 1. Due to the integrated 6-axis gyro and the servo travel limitation, the model can be controlled very well and enables a very stable hovering flight. In addition, the model is self-stabilizing (similar to a coaxial model). The radio remote control has an additional button to bring the heli back to a stable starting position (hover mode). The pitch and roll movements (forward / backward, right / left) are regulated by the manufacturer in such a way that they do not present any major difficulties to a beginning pilot. If a little more power is required, e.g. outdoors in stronger winds, a dual rate switch on the transmitter provides more servo travel as a backup. With a little practice very smooth and fast to move, this helicopter is wonderful as a training model for smaller spaces or halls.

6. Amewi Buzzard V2

7. Amewi AFX180
With a rotor diameter of 320mm, the AFX180 single rotor is controlled by a 3D / 6G gyro and also features an automatic "hold altitude" mode (Att. Hold). On top of that, this great entry-level helicopter features an auto-launch function that lets the model take off at the push of a button and hover independently at a safe altitude. The pilot can thus relax and concentrate on the essential control function - and no longer needs to worry about the throttle and the tail. So while the 6G system neatly balances the rear, only the pitch (forward/back) and roll (right/left) functions need to be controlled themselves. In 6G mode, the maximum deflection of the servos is also limited, which makes the system act similar to a coaxial helicopter.
When the stick on the transmitter is in the center position, the model automatically stabilizes back around the neutral axis. For faster flights or in light winds, there is also a dual rate function that frees up more servo travel. This makes the model more agile and nimble. Overall made of robust material and equipped with a large LiPo battery 2S 7.4V, 700mAh, long flight times of up to 15 minutes are possible. Quickly recharged within 70-90 minutes via USB cable, the AFX180 single-rotor helicopter can take off again and enjoy the high altitude air to the fullest.

8. Amewi AFX-135 DRF
AFX-135 DRF 4-CHANNEL HELICOPTER 6G RTF
Super Scale replica of a well known helicopter painted in the colours of the Deutsche Luftrettung - the AFX-135 features numerous details that are completely true to the original. Even the individual rivets of the cabin, which is made of solid plastic, are represented. In the front as well as in the back, this scale helicopter has LED lighting, which rounds off the impressive look. Thanks to high-quality electronics including auto-start and auto-landing, the flight behaviour is good-natured and the helicopter is suitable for beginners despite the multi-blade rotor head. The flight time is about 7-9 minutes with the integrated, intelligent battery. The special feature here is that a USB charging socket is built into the battery, which is simply connected to the USB cable supplied. The battery and the model have a voltage monitoring function (LED starts flashing when the voltage gets too low). This way, the pilot knows at any time when it is better to start the return flight to recharge. The high-quality 2.4GHz transmitter, which fits well in the hand, has three different flight phases (from beginner to advanced), aluminium sticks and the option to switch from mode 2 (delivery state) to mode 1. The AFX-135 DRF is delivered as RTF version (Ready-to-Fly), i.e. all components - except for household batteries for the remote control - are already included in the package and the helicopter can start flying immediately after charging the battery.
Features:
Auto take-off and landing at the touch of a button
Detailed cabin
Intelligent battery incl. charging socket
High quality transmitter with aluminium sticks
Switch from Mode-2 to Mode-1 possible
Automatic altitude control via electronics
Three different flight phases from beginner to advanced (suitable for indoor and outdoor use in light wind)
Technical data:
Fuselage length: 235mm
Fuselage height: 80mm
Rotor diameter: 256mm
Main material: high-strength plastic
Weight ready to fly: approx. 100g
Servos: 2 microservos / swashplate
Remote control: 2,4GHz, 6 channels, mode 2 and mode 1, frequency 2460-2475MHz, max. frequency strength 14dBm
Range: approx. 50-80m
Battery: LiPo 2S 7,4V 350mAh, hardcase, 42x29x15mm, weight: 24g
Flight time: 7-9min
Charger: USB cable
Charging time: approx. 60-90min
Scope of delivery:
Model
Remote control
Battery
USB charging cable
Spare rotor blades
Instruction manual DE/EN
Required accessories:
4x 1.5V AA batteries for the remote control.

9. Amewi AFX180 Pro 3D Flybarless
Satisfying power meets handy size - the result is the 3D 6-channel helicopter AFX Pro 180 3D flybarless. The model has an extremely powerful drive (1308 brushless motor with 6500KV) and a high-speed tail motor (1104 brushless), which in combination with the precise flybarless system and the LiPo battery 7.4V 700mAh allows brutal performance. For those switching or entering the field of pitch controlled 3D helicopter aerobatics, this RC helicopter can be customized in several ways: Out of the box, the model features a beginner-friendly 6G mode. Here, the throttle stick is used to adjust the RPM so that the AFX180 Pro behaves like a normal fixed pitch (RPM controlled) helicopter. The response and climb rate are just better and faster. Alternatively, the transmitter can be used to switch to 3D mode - turning this small pitch-controlled helicopter into a real monster.

10. Amewi Electric helicopter Buzzard Pro XL
Powerful, efficient, semi-professional - but still almost as good-natured as a coax helicopter. The brushless version of the almost legendary Buzzard Helicopter stands out especially because of the unique 45° rod over the rotor head, which is almost revolutionary and gives the heli an uncomplicated and smooth controllability. This special construction allows the helicopter to manoeuvre almost pitch-controlled. Therefore it closes the gap between beginner and professional RC-helicopters. The modern 2.4 GHz remote control can not only be switched to the desired flight mode (Mode 1, 2, 3 or 4!) at the push of a button, it also works very precisely and above all very interference-free. All relevant flight data can also be read off an LCD display. The components used in the Buzzard XL Brushless are proven and mature. Two flight speeds are selectable. The helicopter is also a real eye-catcher. The 7.4V 1500mAH 2S Lipo battery provides a lot of power and a long flight time. Charge - take off - have fun.
