Best selling Metrology from TE Sensors
On this page you'll find a ranking of the best TE Sensors products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. TE Sensors PRES TRANS 100BAR 0-10V G1 4A
This electronic pressure sensor XMLP has a nominal pressure of 100 bar, an electrical connection with an M12 connector, and a fluid connection with G 1/4 to DIN 3852-a connector. This high-pressure transmitter is designed for precise pressure control of air, fresh water between 0 °C and +120 °C, cooling fluids, and hydraulic oils. Additionally, it is suitable for all liquids compatible with stainless steel AISI 304, between -30 °C and +120 °C. It is mounted directly on the pipe. It offers high corrosion resistance made of stainless steel AISI 316L and a pressure chamber made of fluorocarbon resin for maximum durability. With a mechanical lifespan of 10 million cycles, it ensures minimal maintenance effort on your pressure medium circuits. It complies with EN/IEC 61326-2-3, RCM, cULus, and EAC. Its very short housing makes it ideal for installation in tight piping. This product replaces XMLP100BD72.
2. TE Sensors PRESSURE TRANSMITTER 100 BAR 420MA G1/4
The Telemecanique Sensors pressure transmitter XMEP is a highly advanced device specifically designed for mobile applications. With a pressure range of 0 to 100 bar and a robust housing made of stainless steel 316L, this pressure converter offers reliable performance in demanding environments. The XMEP pressure transmitter is equipped with an M12 connector, allowing for easy electrical connection. It supports various pressure measurement tasks and is suitable for use with hydraulic oils, gases, and refrigerants. The temperature range of -40 to +100 °C ensures versatile applicability, while the IP 69K protection rating safeguards the device against dust and water. The pressure transmitter is also certified according to international standards, highlighting its quality and safety.
- High-quality stainless steel housing (316L) for durability
- IP 69K protection rating for maximum resilience
- Temperature range of -40 to +100 °C for versatile applications
- Easy electrical connection via M12 connector
- Certified according to E-certification, CE, EN61326-2-3.
3. TE Sensors PRES TRANS 250 BAR 0-10V G1/4A
Pressure display type = Differential
Pressure indication max. = 750bar
Accuracy = 0.1
Output type = Analog
Medium = air, fresh water, hydraulic oil
Process connection = G1/4
Analog output = 0 → 10 V
Response time = ≤ 2 ms
Max. current =
<7
4. TE Sensors PRES TRANS 60 BAR 0-10V G1/4A
The PRES TRANS 60 BAR 0-10V G1/4A from Telemecanique Sensors is a highly precise pressure transducer designed for a variety of applications in measurement technology. With a maximum operating pressure of 60 bar and an output voltage of 0-10V, this device provides reliable and accurate pressure measurement. The pressure transducer is equipped with a G1/4A connector, allowing for easy integration into existing systems. Its robust construction and IP65/IP67 protection rating ensure high resistance to environmental influences, making it ideal for use in demanding conditions. The temperature range of -20°C to 120°C significantly expands the device's application possibilities. The XMEP060BD71F is not only durable but also versatile, making it a valuable component in industrial automation.
- Maximum operating pressure of 60 bar
- Output voltage of 0-10V
- Robust construction with IP65/IP67 protection rating
- Temperature range of -20°C to 120°C
- Easy integration via G1/4A connector.
5. TE Sensors PRESSURE TRANSMITTER 250 BAR 420MA G1/4
The XMEP250BD21F pressure transmitter from Telemecanique Sensors is a highly precise measuring device designed for mobile applications. With a pressure range of 0 to 250 bar and an analog output of 4-20 mA, this device is ideal for monitoring and controlling pressure in various industrial applications. The pressure transducer is made of robust stainless steel 316L, making it particularly resistant to aggressive media. The IP65 protection class ensures that the device is protected against dust and splashes, while the IP69K certification provides additional protection during high-pressure cleaning. The temperature range of -40 to +100 °C allows for use in extreme environments. The XMEP250BD21F is equipped with an M12 connector, enabling easy electrical connection and simplifying installation.
- Stainless steel 316L housing for high corrosion resistance
- Protection class IP65 and IP69K for versatile applications
- Temperature range of -40 to +100 °C for extreme environments
- Analog output 4-20 mA for precise pressure measurement
- Certified according to CE and EN61326-2-3 for high safety standards.
6. TE Sensors PRESSURE TRANSMITTER 200 PSI 4 20MA CONN
The Yageo XMLK electronic pressure switch is perfect for use as a guardian. The maximum operating pressure is 13,789.5 psi, with a switching pressure of 0 and a cut-off pressure of 0. The test pressure is 27.58 and the burst pressure is 41.37. The medium is 0 and the operating voltage is DC 24. There are no auxiliary contacts. The electrical connection has a different design. The thread size is different, and the protection class (IP) is IP65/IP67. The electronic design is yes. The diameter is 36 and the depth is 65.5. This pressure switch is delivered as a set of 1.
Features:
- Suitable as a guardian: yes
- Suitable as a 2-point controller: no
- Suitable as a limiter: no
- Max. operating pressure: 13,789.5
- Switching pressure: 0
- Initial setting: 0
- Cut-off pressure: 0
- Final setting: 0
- Max. test pressure: 27.58
- Burst pressure: 41.37
- Medium temperature: 0
- Rated operating voltage Ue at DC: 24
- Number of auxiliary contacts as normally closed: 0
- Number of auxiliary contacts as normally open: 0
- Number of auxiliary contacts as changeover: 0
- Design of the electrical connection: different
- Number of normally open contacts as main contacts: 0
- Number of normally closed contacts as main contacts: 0
- With manual operation: no
- With manual on/off switch: no
- Protection class (IP): IP65/IP67
- Electronic design: yes
- Explosion-proof: no
- Thread size: different
- With display: no
- Protection class (NEMA): different
- Diameter: 36
- Depth: 65.5.
7. TE Sensors PRESSURE TRANSMITTER 60 BAR 420MA G1/4A
The XMEP060BD21F pressure transmitter from Telemecanique Sensors is a high-precision measuring device specifically designed for monitoring pressure in various applications. Made from robust stainless steel 316L, this device offers high resistance to aggressive media and environmental conditions. The pressure transmitter is suitable for use in hydraulic oils, gases, and refrigerants, covering a pressure range of 60 to 600 bar. With an analog output of 0-10 V, 0.5-4.5 V, or 4-20 mA, it allows for flexible integration into existing systems. The IP 69K protection rating ensures that the device operates reliably even under extreme conditions. The temperature range of -20 to +120 °C makes it versatile, while the E-certification, as well as CE and EN61326-2-3 certifications, provide additional safety and reliability.
- Made from stainless steel 316L for high resistance
- Analog output of 0-10 V, 0.5-4.5 V, or 4-20 mA
- IP 69K protection rating for extreme environments
- Temperature range of -20 to +120 °C
- E-certification as well as CE and EN61326-2-3 certification.
8. TE Sensors PRESSUR SWITCH XMLA010B2S11
The XMLA010B2S11 pressure switch from Telemecanique Sensors is a highly advanced device for precise pressure measurement in various applications. With a maximum operating pressure capacity of 10 bar and a fixed hysteresis, this electromechanical pressure switch delivers reliable performance in demanding environments. It is suitable for use with hydraulic oils as well as fresh and seawater, and can withstand temperatures up to +160 °C. The pressure switch is equipped with a Pg13 connection, facilitating integration into existing systems. Its robust design and international protection rating of IP66 ensure high resistance to dust and water, making it ideal for industrial applications. The XMLA010B2S11 is not only suitable for pressure measurement but can also be used as a guard, highlighting its versatility.
- Maximum operating pressure capacity of 10 bar
- Fixed hysteresis for reliable switching operations
- Suitable for hydraulic oils as well as fresh and seawater
- Temperature resistant up to +160 °C
- International protection rating IP66 for high durability.
9. TE Sensors PRES TRANS 25BAR 0-10V G1 4A
This electronic pressure sensor XMLP has a nominal pressure of 25 bar, an electrical connection with an M12 connector, and a fluid connection with G 1/4 a DIN 3852-e connector. This pressure transmitter is designed for precise pressure control of air, fresh water between 0 °C and +135 °C, coolants, and hydraulic oils. Furthermore, it is also suitable for all liquids compatible with stainless steel AISI 304, between -30 °C and +135 °C. It is mounted directly on the pipe. It offers high corrosion resistance made of stainless steel AISI 316L and a pressure chamber made of fluorocarbon resin for maximum durability. With a mechanical lifespan of 10 million cycles, it ensures minimal maintenance effort on your pressure medium circuits. It complies with EN/IEC 61326-2-3, RCM, cULus, and EAC. Its very short housing makes it ideal for installation in tight piping. This product replaces XMLP025BD71V.
10. TE Sensors PRESSURE TRANSMITTER 60 BAR 0,54,5V DC G
The Telemecanique Sensors pressure transmitter XMEP-60 bar is a high-precision measuring device specifically designed for industrial applications. With a maximum operating pressure of 60 bar (60000 kPa) and a measurement range of 0 to 6000000 kPa, this device offers reliable and safe pressure measurement. The pressure transmitter is equipped with a G1/4A connector and operates with a rated voltage of 5 V DC. The IP protection class of IP65/IP67 ensures that the device is protected against dust and water, making it ideal for use in harsh environments. The temperature range of -20 °C to 120 °C allows for use in various industrial applications. The XMEP-60 bar is an electronic device that has no auxiliary contacts, making it a simple and effective solution for pressure measurements.
- Maximum operating pressure of 60 bar (60000 kPa)
- Measurement range up to 6000000 kPa
- IP protection class of IP65/IP67 for dust and water protection
- Temperature range of -20 °C to 120 °C
- G1/4A connector and M12 connection for easy integration.
