Best selling Fan heaters from El-Björn
On this page you'll find a ranking of the best El-Björn products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. El-Björn Vf21
Safety of the El-Björn VF21: The El-Björn VF21 electric heater fan features double overheating protection. Cheap electric heaters, which unfortunately are often sold today with serious consequences for the environment and consumers, only have a simple overheating protection. What does this mean in practice? When the room temperature reaches the °C value you have set, the simply protected devices turn off. The residual heat in the device is not expelled. Since the residual heat rises from the heating elements, this can quickly lead to the burning of the switching components and wiring. This drastically reduces the lifespan of the electric heater. With the double overheating protection of the El-Björn VF21 heater, the residual heat of the heating elements is measured by an additional sensor head and expelled by the automatically activated fan if necessary. This prevents premature burning out of the heating elements and switching components. If the power plug is pulled after several hours of operation, the cooling mechanism cannot take place, and the heater overheats.
Operating modes of the El-Björn VF21: 1. Switch position on the heating stage switch: Only the fan motor is in operation. This mode is recommended after intensive use of the heater fan. Let the fan run for 5 minutes to cool down the heating elements. 2. Switch position on the heating stage switch: Half heating power of 1.0 kW is activated. 3. Switch position on the heating stage switch: Full heating power of 2.15 kW is activated. 4. Switch position on the heating stage switch: Device is completely turned off.
2. El-Björn Vf21t
The El-Björn VF 21 and VF 21T electric heaters feature a dual overheat protection system. Inexpensive electric heaters, which are often sold today with serious consequences for the environment and consumers, only have a basic overheat protection. What does this mean in practice? When the room temperature reaches the Celsius value you have set, the simply protected devices shut off. The residual heat in the device is not dissipated. As the residual heat rises at the heating elements, this can lead to the burning of the switching components and wiring in a short time, drastically reducing the lifespan of the electric heater.
Thanks to the dual overheat protection of the El-Björn VF heaters, the residual heat of the heating elements is measured by an additional sensor head and dissipated by the automatically activated fan when necessary. This prevents premature burning out of the heating elements and switching components. If the power plug is pulled after several hours of operation, the cooling mechanism cannot take place, and the heater will overheat.
3. El-Björn Vf15t
Safety: The El-Björn electric heater VF15T features a double overheating protection system. In contrast to cheap electric heaters, which unfortunately are often sold today with serious consequences for the environment and consumers, the VF15T has a more advanced safety feature. What does this mean in practical terms? When the room temperature reaches the °C value you have set, devices with simple overheating protection turn off. However, the residual heat inside these devices is not expelled. Since the residual heat rises from the heating elements, this can quickly lead to the burning of the switching elements and wiring, drastically reducing the lifespan of the electric heater. The double overheating protection in the El-Björn heater VF15T measures the residual heat of the heating elements with an additional sensor head and, if necessary, expels it through an automatically activated fan. This prevents premature burnout of the heating elements and switching components.
Operating modes of the El-Björn VF15T: 1. Switch position on the heating stage switch: Only the fan motor is in operation. 2. Switch position on the heating stage switch: Half heating power of 7.5 kW is activated. 3. Switch position on the heating stage switch: Full heating power of 15.0 kW is activated. 4. Switch position on the heating stage switch: The device is completely turned off.
4. El-Björn Vf6
The El-Björn VF6 is additionally equipped with a timer. You can use this for either response delay or runtime limitation. The safety of the El-Björn VF6 electric heater is ensured by a double overheat protection system. Cheap electric heaters often only have a simple overheat protection. What does this mean in practice? When the room temperature reaches the °C value you set, the simply protected devices turn off. The residual heat in the device is not expelled. Since the residual heat rises at the heating elements, this can lead to the burning of the switching elements and wiring in a short time, drastically reducing the lifespan of the electric heater.
With the double overheat protection of the El-Björn VF6 heater, the residual heat of the heating elements is measured by an additional sensor head and expelled by the automatically activated fan if necessary. This prevents premature burning of the heating elements and switching components. If the VF6 heater is removed from the power source immediately after operation, the fan motor can no longer expel the residual heat, leading to overheating of the machine. Before the next power-on, the reset button located next to the thermostat must be pressed with a needle or paperclip. A quiet clicking sound is audible. The heater is now ready for operation again.
Operating modes of the El-Björn VF6: 1. Switch position on the heating stage switch: Only the fan motor is in operation. 2. Switch position on the heating stage switch: Half heating power of 3.0 kW is activated. 3. Switch position on the heating stage switch: Full heating power of 6.0 kW is activated. 4. Switch position on the heating stage switch: The device is completely turned off.
5. El-Björn Vf6t
The El-Björn VF6T is additionally equipped with a timer. You can use it either for a response delay or to limit the runtime. Safety of the El-Björn VF6T: The El-Björn VF6T electric heater has double overheating protection. Cheap electric heaters only have a single overheating protection. What does this mean? Specifically: When the room temperature reaches the °C value you have set, the simply protected devices turn off. The residual heat in the device is not expelled. Since the residual heat rises from the heating elements, this can quickly lead to the burning of the switching elements and wiring. This drastically reduces the lifespan of the electric heater.
With the double overheating protection of the El-Björn heater VF6T, the residual heat of the heating elements is measured by an additional sensor head and expelled by the automatically activated fan if necessary. This prevents premature burning of the heating elements and switching components. If the VF6T heater is disconnected from the power source immediately after operation, the fan motor can no longer expel the residual heat. The unit overheats. Before the next activation, the reset button located next to the thermostat must be pressed with a needle or paperclip. A soft clicking sound is audible. The heater is now ready for operation again.
Operating modes of the El-Björn VF6T: 1. Switch position on the heating stage switch: Only the fan motor is in operation. 2. Switch position on the heating stage switch: Half heating power of 3.0 kW is activated. 3. Switch position on the heating stage switch: Full heating power of 6.0 kW is activated. 4. Switch position on the heating stage switch: The device is completely turned off.
6. El-Björn VF 12
El-Björn electric fan heaters VF12 +VF12T have double overheating protection. Cheaper electric heaters often have only a single overheating protection. What does this mean? Specifically, when the room temperature reaches the °C value you set, the single-protected devices switch off. The residual heat in the device is not blown out. As the residual heat rises up the heating rods, this causes the switching elements and wiring to burn within a short time. This drastically reduces the life expectancy of the electric heater. Due to the double overheating protection of the El-Björn heaters VF 12+ VF 12T, the residual heat of the heating rods is measured by means of an additional sensor head and, if necessary, blown out by the automatically switched-on fan. This prevents the heating rods and switching elements from burning up prematurely. If the VF 12 or VF 12T is removed from the power source immediately after operation, the fan motor can no longer blow out the residual heat. The machine overheats. Before switching on again, use a pin or paper clip to press the reset button directly next to the thermostat. A soft clicking sound can be heard. The heating is now operational again. This should not happen regularly because the wiring will be damaged in the long run. Leave the electric heaters connected to the mains for at least 1 hour after use. Especially in the case of strong heating power, as is the case here, sufficient attention should be given to the cooling down process. This process significantly prolongs the life expectancy of the electric heater.
7. El-Björn Vf9
The VF9 is additionally equipped with a 14 hour timer. Operate this either as a lukewarm timer or response delay. Thus, you can program the start of the heater the night before and enter the next morning a warm construction site, barn, etc. Safety: El-Björn electric fan heater VF9 has a double overheating protection. Cheap electric heaters that are unfortunately sold in great numbers nowadays with serious consequences for the environment and consumers, have only a simple overheating protection. What does this mean? Specifically, when the room temperature reaches the °C value you set, the simply protected devices switch off. The residual heat in the device is not blown out. As the residual heat rises up the heating rods, this causes the switching elements and wiring to burn within a short time. This drastically reduces the life expectancy of the electric heater. Due to the double overheating protection of the El-Björn heater VF9, the residual heat of the heating rods is measured by means of an additional sensor head and, if necessary, blown out by the automatically switched-on fan. This prevents the heating rods and switching elements from burning up prematurely.
Operating modes of the El-Björn VF9: 1st switching stage at the heating stage switch: Only fan motor in operation. 2nd switching stage at the heating stage switch: Half heating power of 4.5 kW is activated. 3rd switching stage on the heating stage switch: Full heating power of 9.0 kW is activated. 4th switching step on the heating step switch: Device is completely switched off.
8. El-Björn Vf12t
The El-Björn electric heaters VF12 and VF12T feature a dual overheat protection system. Cheaper electric heaters often only have a simple overheat protection. What does this mean in practice? When the room temperature reaches the °C value you set, the simply protected devices turn off. The residual heat in the device is not expelled. Since the residual heat rises from the heating elements, this can lead to the burning of the switching components and wiring in a short time. This drastically reduces the lifespan of the electric heater.
With the dual overheat protection of the El-Björn heaters VF12 and VF12T, the residual heat of the heating elements is measured by an additional sensor head and expelled by the automatically activated fan when necessary. This prevents premature burning of the heating elements and switching components.
If the VF12 or VF12T is removed from the power source immediately after operation, the fan motor cannot expel the residual heat, leading to overheating of the machine. Before the next switch-on, the reset button located next to the thermostat must be pressed with a needle or paperclip. A quiet clicking sound is audible. The heater is now ready for use again. This should not occur regularly, as the wiring can be damaged in the long term. Keep the electric heaters connected to the power supply for at least one hour after use. Especially with high heating performance, as is the case here, sufficient attention should be given to the cooling process. This significantly extends the lifespan of the electric heater.
9. El-Björn Vf9t
The VF9T is additionally equipped with a 14-hour timer. You can use it either as a runtime timer or a response delay. This allows you to program the heating to start the night before, so you can enter a warm construction site, barn, etc. the next morning.
Safety: The El-Björn electric heater fan VF9T features double overheating protection. Cheap electric heaters, which unfortunately are widely sold today with serious consequences for the environment and consumers, only have a simple overheating protection. What does this mean? Specifically: When the room temperature reaches the °C value you have set, the simply protected devices turn off. The residual heat in the device is not blown out. As the residual heat rises from the heating elements, it can quickly lead to the burning of the switching elements and wiring. This drastically reduces the lifespan of the electric heater. With the double overheating protection of the El-Björn heater VF9T, the residual heat of the heating elements is measured using an additional sensor head and is blown out by the automatically activated fan when necessary. This prevents premature burning of the heating elements and switching components.
Operating modes of the El-Björn VF9T:
1. Switch position on the heating stage switch: Only the fan motor is in operation.
2. Switch position on the heating stage switch: Half heating power of 4.5 kW is activated.
3. Switch position on the heating stage switch: Full heating power of 9.0 kW is activated.
4. Switch position on the heating stage switch: The device is completely turned off.
10. El-Björn Vf15
Safety: El-Björn electric fan heater VF15 has a double overheating protection. Cheap electric heaters that are unfortunately sold in great numbers nowadays with serious consequences for the environment and consumers, have only a simple overheating protection. What does this mean? Specifically, when the room temperature reaches the °C value you set, the simply protected devices switch off. The residual heat in the device is not blown out. As the residual heat rises up the heating rods, this causes the switching elements and wiring to burn within a short time. This drastically reduces the life expectancy of the electric heater. Due to the double overheating protection, as the El-Björn heater VF15 has, the residual heat of the heating rods is measured by means of an additional sensor head and, if necessary, blown out by the automatically switched on fan. This prevents the heating rods and switching elements from burning up prematurely.
Operating modes of the El-Björn VF15: 1st switching stage at the heating stage switch: Only fan motor in operation. 2nd switching stage at the heating stage switch: Half heating power of 7.5 kW is activated. 3rd switching step on the heating step switch: Full heating power of 15.0 kW is activated. 4th switching step on the heating step switch: Device is completely switched off.
