Best selling Effects pedals from Ernie Ball
This page always stays fresh and updates automatically.
1. Ernie Ball Volume pedal
Since its introduction in 1977, the Ernie Ball Volume Pedal has become the top choice for musicians around the world. The Ernie Ball 40th Anniversary VP Pedal features a Limited Edition Slate Black aluminum housing and an updated graphic for a sleek appearance on and off the stage. The advanced, highly durable Kevlar cable enhances the potentiometer pull and provides more precise volume control with smooth foot operation. Inspired by the sturdy design of the original, the pedal's compact aluminum housing is nearly indestructible. We celebrate 40 years of quality, performance, and reliability with this Anniversary Edition Volume Pedal. Our innovative, PVC-coated Kevlar cable ensures improved potentiometer pull, consistent tension, and smoother operation for particularly expressive volume swells.
2. Ernie Ball VPJR Tuner
The Ernie Ball VPJR Tuner provides you with a 2-in-1 pedal that offers both precise volume control and a digital tuner with enhanced accuracy. This pedal features a fast and accurate chromatic tuner with a graphical volume display, making it visually appealing and easy to use. Depending on the signal strength, the large display automatically switches between tuner and volume mode, allowing you to tune at minimal volume. However, by double-tapping the touchscreen, you can also activate "always-on" configurations. The tuner can be calibrated to a variety of ideal reference tunings. The VPJR Tuner comes in a compact, sturdy aluminum housing. The strong, durable Kevlar cable with PVC coating ensures consistent tension throughout the pedal's operation.
3. Ernie Ball Mvp
The Ernie Ball Most Valuable Pedal operates extremely smoothly and is ideal for precise volume control, without any loss of high frequencies across the entire range. It works seamlessly with both active and passive audio signals and provides a gain boost of up to +20 dB when needed. A compact, robust, and nearly indestructible aluminum housing contains the electronics, powered by a 9-volt battery or an optional 9 Volt/100 mA DC power supply.
All Ernie Ball volume pedals are designed for absolute roadworthiness. The machined aluminum housings are beyond any doubt in terms of stability. The pedal shafts are made of stainless steel, so wear and tear, such as loosening, is not a concern. A sturdy rubber mat ensures a non-slip grip for the feet on the pedal. In addition to the high weight of the pedals, four rubber feet guarantee a secure stand on the floor. All pedals operate passively, so no batteries are required. The mechanical design is such that the potentiometers are moved by a cable pull when the pedals are pressed down. Each pedal is moved a thousand times before delivery - you can truly call that a final inspection! Thanks to the open housings and the plugged cable connections at the potentiometer, the parts are extremely service-friendly. To simplify handling, all the jack sockets are now located on the front side.
4. Ernie Ball 500k stereo volume/pan pedal
The Ernie Ball 500k Stereo Volume Pedal is equipped with a 500k pot for audio signals from both passive and active instruments. There is a switch on the treadle that allows you to choose between the two operating modes: Volume or Pan. The 500k stereo pedal is extremely versatile and suitable for both stereo and mono applications. Stereo jack cables are connected to inputs and outputs A and B. When used as a typical pan pedal, the switch is engaged with the foot into the pan position, utilizing only input A. The pedal now pans the signal between outputs A and B.
All Ernie Ball volume pedals are characterized by their absolute roadworthiness. The enclosures made from machined aluminum are beyond doubt in terms of their stability. The pedal axles are made of stainless steel, so wear, such as loosening, is not a concern. A robust rubber mat ensures that feet do not slip on the treadle. In addition to the high weight of the pedal itself, four rubber feet guarantee a secure stand on the floor. All pedals operate passively, meaning no batteries are required. The mechanical design is such that the pots are moved by a cable pull when the pedals are pressed down. Each pedal is moved a thousand times before delivery—this can truly be called quality control! Thanks to the open housing and the plugged cable connections at the pot, the components are extremely service-friendly. To simplify handling, all jack sockets are now located on the front side.
5. Ernie Ball 250k Mono Volume Pedal with Switch
The original Ernie Ball Mono Volume Pedal in standard size offers precise volume control with an extremely smooth action and is perfectly tuned for passive audio signals. An on/off switch on the treadle controls via the jack socket labeled "SWITCH" and a separate circuit, for example, channel switching, effect bypass, or similar functions in other devices in the setup.
All Ernie Ball volume pedals are characterized by their absolute roadworthiness. The enclosures made from machined aluminum are beyond any doubt in terms of their stability. The pedal axles are made of stainless steel, so wear, such as from loosening, is not a concern. A robust rubber mat ensures a non-slip grip for feet on the treadle. In addition to the high weight of the pedals, four rubber feet guarantee a secure stand on the floor. All pedals operate passively, so no batteries are required. The mechanical design is such that the potentiometers are moved by a cable pull when the pedals are pressed down. Each pedal is moved a thousand times before delivery - you can really call that a final inspection! Thanks to the open enclosures and the plugged cable connections on the potentiometer, the parts are extremely service-friendly. To simplify handling, all jack sockets are now located on the front side.
6. Ernie Ball Vp Jr 25k
The Ernie Ball VP Jr 25k comes with the same great features as our original volume pedal, but is 22% smaller. Housed in a compact, sturdy, and nearly indestructible aluminum casing, this pedal is perfectly tuned for active audio signals. A durable Kevlar pull cable, secured with a stainless steel spring, transmits the pedal's movement to the 25k potentiometer.
Designed for keyboards, it is also ideal for the FX loop of a guitar amp. In this setup, it effectively functions as a master volume, while the guitar pot continues to control distortion as usual.
All Ernie Ball volume pedals are built for absolute road readiness. The machined aluminum housings are beyond doubt in terms of their stability. The pedal shafts are made of stainless steel, so wear and tear, such as loosening, is not a concern. A robust rubber mat ensures a slip-resistant grip for your feet on the pedal. In addition to the high weight of the pedal itself, four rubber feet guarantee a secure stand on the floor. All pedals operate passively, so no batteries are required. The mechanical design is such that the pots are moved via a pull cable when the pedals are pressed. Each pedal is moved a thousand times before delivery—now that’s what you call a final inspection! Thanks to the open housings and the plug connections on the pot, the parts are extremely service-friendly. To simplify handling, all the jacks are now located on the front side.
7. Ernie Ball Vp Jr 250k
The Ernie Ball VP Jr 250k comes with the same great features as our original volume pedal, but is 22% smaller. Housed in a compact, robust, and nearly indestructible aluminum casing, this pedal is perfectly tuned for passive audio signals. Directly behind the input jack below the treadle is a microswitch that allows you to choose between two preset volume rates.
All Ernie Ball volume pedals are designed for absolute roadworthiness. The machined aluminum casings are beyond any doubt in terms of their stability. The pedal shafts are made of stainless steel, so wear and tear, such as loosening, is not a concern. A sturdy rubber mat ensures a non-slip grip for your feet on the treadle. In addition to the high weight of the pedal itself, four rubber feet guarantee a secure stand on the ground. All pedals operate passively, so no batteries are required. The mechanical design is such that the pots are moved by a pull cord when the pedals are pressed down. Each pedal is moved a thousand times before delivery – now that’s what you call quality control! Thanks to the open housing and the plug-in cable connections at the pot, the parts are extremely service-friendly. To simplify handling, all the jacks are now located on the front side.
8. Ernie Ball 250k Mono Volume Pedal
The original Ernie Ball Mono Volume Pedal in standard size offers precise volume control with an extremely smooth operation and is perfectly tuned for passive audio signals. A micro-switch under the treadle behind the input jack allows for the selection between two preset volume rates. The Ernie Ball VP 250k is housed in a robust and nearly indestructible aluminum casing.
All Ernie Ball volume pedals are characterized by their absolute roadworthiness. The machined aluminum housings are beyond any doubt in terms of their stability. The pedal shafts are made of stainless steel, so wear, such as from loosening, is not a concern. A sturdy rubber mat ensures a non-slip grip for the feet on the treadle. In addition to the high self-weight, four rubber feet guarantee a secure stand of the devices on the ground. All pedals operate passively, so no batteries are required. The mechanical design is such that the pots are moved by a cable pull when the pedals are pressed down. Each pedal is moved a thousand times before delivery - you can really call that a final inspection! Thanks to the open housing and the plug-in cable connections on the pot, the components are extremely service-friendly. To simplify handling, all the jacks are now located on the front side.
Product order
See all products