Best selling 3D printer filaments from Polymaker
On this page you’ll find a ranking of the best 3D printer filaments from Polymaker. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. Polymaker PolyTerra
PolyTerra PLA is a novel bioplastic 3D printing filament that is not only harder than conventional PLA but also less harmful to the environment. By reducing the amount of raw PLA and incorporating organic materials, the plastic content in the material has been lowered by about 40%. The added organic materials give PolyTerra PLA a matte finish. Additionally, Polymaker, the manufacturer of PolyTerra PLA, has partnered with the nonprofit organization One Tree Planted to plant a tree for every spool sold, further emphasizing the eco-friendly aspect of PolyTerra PLA.
2. Polymaker PolyLite PETG V2
PolyLite is a family of 3D printing filaments made from the finest raw materials to ensure exceptional quality and reliability. PolyLite covers the most common 3D printing materials to meet your everyday design and prototyping needs. PolyLite PETG is a cost-effective PETG filament that offers easy printability. The strength and temperature resistance of PolyLite PETG lies between the stiff and strong PolyLite PLA and the robust and impact-resistant PolyLite ABS. The V2 version is the new version in which the filament is wound on a cardboard spool. The material has remained the same.
3. Polymaker Filament
Polymaker - PolyTerra PLA - 1.75mm
PolyTerra PLA is an innovative bioplastic 3D printing filament that is not only harder than conventional PLA but also has a lower environmental impact. By reducing the amount of raw PLA and incorporating organic materials, the plastic content in the material has been decreased by about 40%. The added organic materials give PolyTerra PLA a matte finish. Polymaker, the manufacturer of PolyTerra PLA, has partnered with the nonprofit organization One Tree Planted to plant a tree for every spool sold, further emphasizing the eco-friendly aspect of PolyTerra PLA.
Features / Printing Parameters:
- Filament diameter: 1.75 mm
- Material weight: 1000 g
- Color: Army Dark Green
- Printing speed: 30-50 mm/s
- Printing temperature: 190 - 230 °C
- Heated bed temperature: 25 - 60 °C
- Chamber temperature: Not required.
4. Polymaker HT-PLA-GF
Enhanced heat resistance and durability. Polymaker™ HT-PLA-GF offers outstanding thermal performance with a heat deflection temperature (HDT) of up to 114.7 °C (0.45 MPa) and 84 °C (1.8 MPa) in the tempered state. This makes it excellent for components that must withstand high heat and mechanical stress, far exceeding the limits of standard PLA.
Reinforced with fiberglass. By incorporating fiberglass, this filament provides improved stiffness, higher impact resistance, and minimal warping. The material achieves a modulus of elasticity of up to 4200 MPa, offering excellent rigidity and consistent mechanical behavior in both X-Y and Z printing directions.
Dimensional accuracy and stability. Thanks to its low shrinkage values - only 0.05% in both X-Y and Z directions - Polymaker™ HT-PLA-GF ensures precise and reliable results for precision parts. This dimensional stability makes it an excellent choice for printing fixtures and functional prototypes.
Seamless printing experience. The filament is designed to work seamlessly with standard PLA settings, requiring a nozzle temperature of 210-230 °C and a bed temperature of 25-60 °C. It is compatible with most 3D printers and performs best with a hardened nozzle due to its abrasive nature.
Ideal for industrial and functional applications. Whether you are producing mechanical parts, heat-resistant housings, or tools for industrial use, Polymaker™ HT-PLA-GF delivers the performance you need, combining ease of use with professional results.
5. Polymaker PolyLite PETG V2 - Black - 1.75mm
PolyLite PETG is an affordable PETG filament with balanced mechanical properties and easy printability. This makes PolyLite PETG suitable for more functional applications where PLA is not as durable or heat resistant, such as lighting fixtures, vibrating parts or more functional product design prototypes.
6. Polymaker HT-PLA
Advanced heat resistance and durability. Polymaker HT-PLA-GF offers outstanding thermal performance with a heat deflection temperature (HDT) of up to 114.7 °C (0.45 MPa) and 84 °C (1.8 MPa) in annealed condition. This makes it ideal for components that need to withstand high heat and mechanical stress, which far exceeds the limits of standard PLA. Reinforced with glass fibres. By incorporating glass fibres, this filament offers improved rigidity, higher impact strength and minimal warpage. The material achieves a modulus of elasticity of up to 4200 MPa and offers excellent stiffness and consistent mechanical behaviour in both X-Y and Z compression directions. Dimensional stability and stability. Thanks to its low shrinkage values - only 0.05% in the X-Y and Z directions - Polymaker HT-PLA-GF ensures accurate and reliable results for precision parts. This dimensional stability makes it an excellent choice for printing fixtures and functional prototypes.
7. Polymaker Fiberon PPS-CF10
Fiberon PPS-CF10 is a carbon fibre reinforced PPS (polyphenylene sulphide) filament that exhibits minimal deformation under mechanical stress and offers high heat and chemical resistance. It does not require a heated chamber and is specially designed for use in extreme conditions. With an excellent V0 flame retardancy rating and moisture resistance, it is ideal for professional applications.
Note: The test pieces used in the technical data sheets are 3D printed and annealed under the recommended conditions.
Density: 1.29 g/cm³
Printing temperature: 310 °C - 350 °C
Bed temperature: 80 °C - 90 °C
Chamber temperature: room temperature
Printing speed: up to 300 mm/s
Cooling fan: off
Direct drive:
Retraction distance: 3 mm
Retraction speed: 40 mm/s
Indirect drive:
Retraction distance: 6 mm
Retraction speed: 60 mm/s
Recommended drying settings:
Regular oven: 100 °C for 10 h
PolyDryer: Level 3 for 18 h (only if the material has absorbed moisture)
Recommended tempering settings: 125 °C for 16 h
Printer profiles: Bambu Lab, QIDI Tech.
8. Polymaker PolyLite ASA V2 - Black - 1.75mm
Polymaker - PolyLite ASA - 1.75 mm
Weather-resistant, high-quality ASA filament from Polymaker. Polymaker ASA (Acrylonitrile Styrene Acrylate) is a popular alternative to the 3D printing standard ABS (Acrylonitrile Butadiene Styrene Copolymer). Compared to ABS, ASA is significantly more UV-resistant. Even with prolonged outdoor use, ASA does not become brittle or fragile, making it highly regarded for its weather resistance. Additionally, the filament produces a matte, silky surface that is often perceived as very high quality.
With the PolyLite product line, the Chinese premium manufacturer Polymaker offers an easy and affordable entry into the world of technical materials. The kilogram spools are always available at fair prices while maintaining the usual high quality.
Applications for Polymaker PolyLite ASA Filament: Polymaker ASA filament is commonly used outdoors. Private users utilize the printing material for items such as shovel handles or holders in the garden or on the balcony. Industrial users also employ ASA in sectors like the automotive industry or mechanical engineering. Due to its high temperature resistance combined with UV resistance, ASA is excellent for interior covers in cars that can withstand hot summer days without issue.
The V2 version is the new iteration where the filament is wound on a cardboard spool. The material remains unchanged.
Technical specifications:
- Printing temperature: 240 °C - 260 °C
- Printing speed: 30 mm/s - 50 mm/s
- Bed temperature: 75 °C - 90 °C
- Filament weight: 1000 g.
9. Polymaker PJ01001 PolySmooth Filament polishable 1.75 mm 750 g Black 1 pc.
Polishable The first 3D-printable filament for layer-free post-processing. PolySmooth™ has been specifically designed to work with the Polysher™, dramatically improving the surface quality of 3D printed objects. Easy to print PolySmooth™ is compatible with all filament-based 3D printers and prints under similar conditions to PLA. With a wide printing temperature range, low odour, and no heated bed required, PolySmooth™ is the perfect companion for your desktop 3D printer. Optimised for support We have leveraged our experience with PolySupport™ and the optimised PolySmooth™ with the same properties for easy support removal. Effortlessly detach the support from the surface of PolySmooth™, and once your model is polished, no layers remain on the surface. Balanced mechanical properties PolySmooth™ features balanced mechanical properties that surpass those of ABS and PLA in most characteristics, making it an ideal material for everyday 3D printing. No warping PolySmooth™ exhibits very low residual stress during printing, resulting in virtually no warping, making it ideal for printing large parts.
3D printer filament
CHF45.70
Polymaker PJ01001 PolySmooth Filament polishable 1.75 mm 750 g Black 1 pc.
10. Polymaker Polyterra PLA (1.75 mm, 1 kg)
PolyTerra™ PLA is a 3D printing filament with a matte finish based on PLA, offering a wide range of colors and effects. It is an extremely easy-to-print filament with excellent bridging and overhang qualities. It can be printed within a very broad temperature range and is compatible with all extrusion-based 3D printers.
Product order
See all products