Best selling 3D printer filaments from Formfutura
On this page you’ll find a ranking of the best 3D printer filaments from Formfutura. To give you a quick overview, we’ve added the most important product details. This page always stays fresh and updates automatically.
1. Formfutura Filament PLA Volcano - White 1.75mm 750g
Properties of PLA Matt from the PLA Plastic Family
PLA Matt is an eco-friendly material that is easy to print and has a matte surface. Slightly modified, the filament retains the typical properties of PLA but makes it tougher and less brittle. Due to a low shrinkage factor, PLA Matt does not deform after cooling.
Printing Properties
Printing Temperature: 180 - 210 °C
Printing Speed: 40 - 100 mm/s
Bed Temperature: 45 - 55 °C
Difficulty Level: Easy
Surface: Matte
Specific Weight: 1.38 g/cm³
Heat Resistance: 53 °C
Compatible Nozzles: Stainless Steel, Hardened Steel, Copper, Alloys, Brass, Ruby
Adhesion Types: 3DLac Adhesive Spray, Spring Steel Plate PEI, PrintaFix
Variants
Item Number: 01126004
Filament: 0.75 kg
Packaging: Cardboard Spool
Spool Diameter: 20 cm
Inner Diameter: 5.4 cm
Spool Width: 4.3 cm.
2. Formfutura Atlas Support - Natural (2.85mm - 300 gram) - 300 g
Features of PVA Atlas from the Plastic Family Support
Atlas Support is a water-soluble PVA (Polyvinyl Alcohol) support material for complex 3D multi-extrusion printing with PETG-based materials. Atlas Support is a 3D printing filament with improved thermal stability and can be printed at slightly higher temperatures compared to regular PVA. This makes Atlas Support an ideal PVA support material for PETG-based materials with good thermal and chemical adhesion.
Printing Properties
Printing Temperature: 180 - 210 °C
Printing Speed: 0 - 0 mm/s
Bed Temperature: 35 - 60 °C
Difficulty Level: Medium
Surface: Normal
Specific Weight: 1.23 g/cm³
Heat Resistance: 53 °C
Compatible Nozzles: Stainless Steel, Hardened Steel, Copper, Alloys, Brass, Ruby
Adhesion Types: 3DLac Adhesive Spray, Spring Steel Plate PEI, PrintaFix
Special Features: Support Material
Variants
Article Number: 01199016
Filament Packaging: Plastic Spool
Spool Diameter: 20 cm
Inner Diameter: 5.4 cm
Spool Width: 7.2 cm
Price: €2.00.
3D printer filament
CHF40.90
Formfutura Atlas Support - Natural (2.85mm - 300 gram) - 300 g
PVA, 2.85 mm, 300 g
3. Formfutura Filament Durabio Black 1.75mm 750g
Properties of DURABIO from the PC-ABS plastic family
The favorable properties of PC and PMMA are combined in this unique DURABIO filament. It is a bio-based technical filament with great value as it combines the best of both polymers. DURABIO is bio-based and outperforms normal PC filaments. Applications that require scratch resistance, hardness, and chemical resistance are perfect candidates for DURABIO.
This exceptional 3D printer filament combines most of the favorable properties of polycarbonate (PC) and those of polymethyl methacrylate (PMMA) in one. DURABIO is a bio-based technical filament and is an innovative renewable 3D printing filament with exceptional properties. DURABIO filament outperforms PC for 3D printing applications that require properties such as scratch resistance, hardness, and chemical resistance. It also offers similar transparency properties to PMMA, but with much higher impact strength and improved heat resistance. DURABIO thus closes the gap between PC and PMMA.
Key features of DURABIO:
- High surface impact strength
- Outstanding UV and weather resistance
- High transparency and optical transmission
- High scratch and abrasion resistance
- Strong, durable, and impact resistant
- Chemical inertness
Printing properties:
- Printing temperature: 230 - 250°C
- Printing bed temperature: 100 - 110°C
- Difficulty: Difficult
- Surface: Normal
- Specific weight: 1.31g/cm3
- Heat resistant: 90°C
- Possible nozzles: Stainless steel, hardened steel, copper, alloyed, brass, ruby
- Adhesion types: 3DLac adhesive spray
- Special properties: UV/weather resistant, chemical resistant, impact resistant
Dry for 5 hours in a filament dryer. Use from a 0.40mm nozzle.
Variants:
- Part number: 01142010
- Filament packaging: Spool
- Spool diameter: 20 cm
- Internal diameter: 5.4 cm
- Spool width: 4.3 cm.
4. Formfutura CarbonFil - Black (Black) (2.85mm - 500 gram) - 500 g
Properties of PETG Carbon from the plastic family PET
CARBON-P is our filament reinforced with 15% carbon fiber based on PET-G. The result is more than double the stiffness of the filament compared to PET-G, with increased impact and heat resistance (Vicat) up to 75 °C. Together with other properties such as a matte surface, no warping, shape stability, and extreme forgiveness in printing, CARBON-P is suitable for typical applications like RC parts, drones, automobiles, and more.
Material properties:
- 15% carbon fiber reinforced PET-G
- Extremely stiff
- Increased impact and heat resistance
- No warping and shape stable
- Matte surface
Printing properties:
- Printing temperature: 230 - 250 °C
- Bed temperature: 60 - 70 °C
- Difficulty level: Medium
- Surface: Glossy
- Specific weight: 1.31 g/cm³
- Heat resistant up to: 75 °C
- Recommended nozzle: hardened steel, ruby
- Adhesion types: 3DLac adhesive spray, spring steel plate PEI, PrintaFix
- Special features: fiber-containing
Variants:
- Article number: 011490
- Filament: 0.5 kg
- Packaging: Plastic spool
- Spool diameter: 20 cm
- Inner diameter: 5.4 cm
- Spool width: 7.2 cm
- Price: .
3D printer filament
CHF50.90
Formfutura CarbonFil - Black (Black) (2.85mm - 500 gram) - 500 g
PETG, 2.85 mm, 500 g
5. Formfutura EasyFix adhesive - No. IV for PC
EasyFix No. IV is an all-purpose building board adhesive specially developed for employees working with polycarbonate-based filaments.
EasyFix adhesives are designed to bond firmly to a heated build plate, ensuring that an object adheres securely. Additionally, it has excellent release properties when the build plate is cold, making it easy to remove a printed object while minimizing the risk of damage to both the build plate and the printed object.
How to use EasyFix 3D printing adhesives:
There is an EasyFix adhesive solution for 3D printing with almost all types of 3D printer filaments. Shake the bottle of EasyFix well before use. Ensure that the build plate of your 3D printer is clean and at room temperature before applying EasyFix to the print bed. Press the applicator sponge onto the build plate so that the EasyFix adhesive saturates the sponge. Allow the adhesive to gradually saturate the sponge. Never squeeze the bottle!
Once the applicator sponge is saturated, apply the EasyFix adhesive evenly to the printable surface of the build plate. Make sure that the Z-height of your 3D printer is correct before starting the print. The EasyFix adhesive will adhere firmly when the build plate is heated.
Wait until the print platform has cooled down to room temperature before removing your 3D printed object. EasyFix 3D printing adhesives have excellent release properties, allowing your printed object to detach from the platform as it cools. If it is still difficult to remove, apply a small amount of warm water to the printed object and the print surface. Allow the water to seep under the printed object before slowly removing it.
A build platform prepared with EasyFix adhesive can be used for multiple 3D prints.
6. Formfutura EasyWood - Birch (2.85mm, 500 gram). Printing material: Polylactic acid (PLA), W
Properties of Wood from the PLA Plastic Family
Wood is a modified filament type based on PLA that smells and feels like wood. It is easy to print. We recommend using a nozzle size of 0.60 mm or larger to avoid clogs. Brass nozzles are recommended. Due to its low shrinkage factor, wood-PLA does not warp after cooling. Polylactic acid is a biodegradable plastic made from renewable natural resources and is one of the most popular materials for 3D printing.
The filament should not be stored too dry, as it can become brittle very quickly.
Features:
- Feels and smells like wood
- Easy to print at low temperatures
- Very low warping
- Biodegradable
Printing Properties:
- Printing temperature: 205 - 235 °C
- Bed temperature: 35 - 60 °C
- Difficulty level: Medium
- Surface: Normal
- Specific weight: 1.2 g/cm³
- Heat resistant: 50 °C
- Compatible nozzles: Brass
- Adhesion types: 3DLac adhesive spray
- Special properties: Contains wood
Variants:
- Item number: Filament
- Packaging: Cardboard spool
- Spool diameter: 20 cm
- Inner diameter: 5.4 cm
- Spool width: 4.3 cm.
3D printer filament
CHF50.90
Formfutura EasyWood - Birch (2.85mm, 500 gram). Printing material: Polylactic acid (PLA), W
PLA, Wood, 2.85 mm, 500 g
7. Formfutura Filament PLA Matt Black 1.75mm 750g
Properties of PLA Matt from the plastic family PLA
PLA Matt is an environmentally friendly material that is easy to print and has a matte surface. Slightly modified, the filament retains the typical properties of PLA but makes it tougher and less brittle. Due to a low shrinkage factor, PLA Matt does not deform after cooling.
Printing properties:
Printing temperature: 180 - 210 °C
Printing speed: 40 - 100 mm/s
Bed temperature: 45 - 55 °C
Surface: Matte
Specific weight: 1.38 g/cm³
Heat resistant: 53 °C
Compatible nozzles: Stainless steel, hardened steel, copper, alloys, brass, ruby
Adhesion types: 3DLac adhesion spray
Variants:
Article number: 01126010
Filament packaging: Cardboard spool
Spool diameter: 20 cm
Inner diameter: 5.4 cm
Spool width: 4.3 cm
Price: 10.75 kg.
8. Formfutura StoneFil - Granite (Granite) (2.85mm - 500 gram) - 500 g
Properties of PLA stone from the PLA plastic family
StoneFil is a PLA-based 3D filament filled with 50% pulverized stone, giving 3D printed parts a true stone-like aesthetic and a rough, matte surface finish. Due to the stone powder filling, the StoneFil filament is abrasive and should not be printed with a brass nozzle. Nozzle size should be at least 0.40 mm.
Printing properties
Printing temperature: 215 - 230 °C
Bed temperature: 45 - 55 °C
Difficulty level: Medium
Surface: Matte
Specific weight: 1.7 g/cm³
Heat resistance: 53 °C
Compatible nozzle materials: hardened steel, ruby
Adhesion types: 3DLac adhesive spray, spring steel plate PEI, PrintaFix
Special properties: stone-filled
Flow rate: ± 110 %
Nozzle: 0.60 mm or larger
Variants
Item number: Filament
Packaging: cardboard spool
Spool diameter: 20 cm
Inner diameter: 5.4 cm
Spool width: 4.3 cm
Price: €0.00.
3D printer filament
CHF40.90
Formfutura StoneFil - Granite (Granite) (2.85mm - 500 gram) - 500 g
PLA, 2.85 mm, 500 g
9. Formfutura EasyWood - Cedar (2.85mm - 500 gram) - 1 piece(s) - 500 g
Properties of Wood from the Plastic Family PLA
Wood is a modified filament type based on PLA that smells and feels like wood. It prints easily. We recommend using a nozzle of 0.60 mm or larger to avoid clogs. Brass nozzles are recommended. Due to a low shrinkage factor, wood-PLA does not warp after cooling. Polylactic acid is a biodegradable plastic made from renewable natural resources and is one of the most popular materials for 3D printing. Store the filament in a not too dry environment, otherwise it will quickly become brittle.
Features:
- Feels and smells like wood
- Easy to print at low temperatures
- Very low warping
- Biodegradable
Printing Properties:
Printing temperature: 205 - 235 °C
Bed temperature: 35 - 60 °C
Difficulty level: Medium
Surface: Normal
Specific weight: 1.2 g/cm³
Heat resistance: 50 °C
Possible nozzles: Brass
Adhesion types: 3DLac adhesion spray, spring steel plate PEI, PrintaFix
Special properties: Contains wood
Variants:
Item number: Filament
Packaging: Spool diameter
Inner diameter: Spool width
Price: 01123017.500 - 10.5 kg plastic spool 20 cm 5.4 cm 7.2 cm.
3D printer filament
CHF50.90
Formfutura EasyWood - Cedar (2.85mm - 500 gram) - 1 piece(s) - 500 g
PLA, Wood, 2.85 mm, 500 g
10. Formfutura Filament BVOH Support Nature 1.75mm 750g
Properties of BVOH from the plastic family support
FormFuturas BVOH – butylene glycol-vinyl alcohol copolymer – 3D printer filament is an advanced water-soluble support material for complex 3D printing with multi-extrusion. BVOH bonds with almost all building materials and dissolves faster in water than PVA support materials. Its thermal stability is optimized to eliminate the risk of clogging the hot end due to thermal degradation.
Printing properties:
Printing temperature: 200 - 230 °C
Printing speed: 0 - 0 mm/s
Bed temperature: 65 - 75 °C
Difficulty level: Medium
Surface: Normal
Specific weight: 1.14 g/cm³
Heat resistance: 0 °C
Possible nozzles: Stainless steel, hardened steel, copper, alloys, brass, ruby
Adhesion types: 3DLac adhesion spray
Special properties: Support material
Variants:
Item number: Filament
Packaging: Cardboard spool
Spool diameter: 20 cm
Inner diameter: 5.4 cm
Spool width: 4.3 cm.
Product order
See all products