Best eSUN products in the 3D printer filament category
On this page you'll find a ranking of the best eSUN products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. eSUN PLA+ Cold White 1.75mm 1Kg
PLA Plus Cold White from eSun is based on a standard PLA filament. The following properties have been optimized: brittleness, break resistance, layer adhesion, flame retardancy, and odor neutrality during printing. eSUN PLA+ is considered by many to be the new standard for PLA printing and offers a very good price-performance ratio. It is not only easier to process, but you also produce better 3D printed parts with smooth and clean surfaces.
Conclusion: PLA+ is very suitable for both beginners and professionals, is easy to print, and provides good adhesion properties with almost no warping effect during printing. PLA+ is also a very good alternative to ABS when something needs to be impact-resistant, such as printed children's toys. PLA+ has excellent elongation and flexural strength to withstand drops, impacts, and breaks due to stretching. No odors are produced during printing, as is the case with ABS.
PLA+ Features:
- Very durable
- Easy to print
- Very good adhesion to the print bed
- High accuracy of less than ±0.05 mm in diameter
Technical Details:
- Color: Cold White
- Item number: PLA+175CW1
- Filament weight: 1 kg
- Diameter: 1.75 mm
- Tolerance: ±0.05 mm
- Printing temperature: 205-225 °C
- Density: 1.24 g/cm³
- Melt flow index: 2 g/10 min
- Impact toughness: 7 kJ/m²
- Break elongation: 29%
- Tensile strength: 60 MPa
- Shape stability: 52 °C
- Spool size outer diameter: 20 cm
- Spool width: 6.7 cm
- Inner diameter (hole): 5.3 cm
- Filament weight: 1000 g
- Weight of empty spool: 278 g
- Total weight: 1460 g
- Dimensions: 205 x 215 x 75 mm.
2. eSUN PLA BASIC 1,75mm BLACK 1kg
With the PLA Basic Filament from eSun, you get an affordable yet high-quality printing material that has been specifically optimized for fast printing speeds. The modified PLA offers improved flow characteristics and allows for high material throughput. Despite the high printing speed, the print quality remains consistently high, with cleanly defined edges and a smooth surface. The material is particularly easy to print, as it does not produce unpleasant odors and does not warp easily during the printing process. This means you can rely on minimal warping issues and a high success rate for your printing projects. The special formulation of the filament significantly reduces stringing, allowing you to achieve clean prints without unwanted threads. The good adhesion to the print bed and excellent layer bonding ensure that even complex models are built stably and precisely. The eSun PLA Basic is an environmentally friendly choice, as it is made from renewable resources and is biodegradable. With a recommended printing temperature of 210-230°C, it can be processed easily on most FDM 3D printers.
Technical Data:
Manufacturer: eSun
Manufacturer SKU: PLA Basic-P175B1
Color: Black
Weight: 1Kg
Diameter: 1.75mm
Tolerance: ±0.05mm
Density: 1.24 g/cm³
Heat resistance: 50-60°C (0.45 MPa)
Melt flow index: 3.5-4.5 g/10min (190°C/2.16kg)
Tensile strength: 20-30 MPa
Elongation at break: 5-10%
Flexural strength: 101.2 MPa
Flexural modulus: 3111.8 MPa
Impact toughness: 3.09 kJ/m²
Recommended printing temperature: 210-230°C (Optimal: 215°C)
Recommended heated bed temperature: 45-60°C
Recommended printing speed: 40-300 mm/s
Spool size outer diameter: 200mm
Spool width: 64mm
Inner diameter (hole): 55mm
Gross weight: 1360g
Dimensions: 198 x 198 x 60mm
Delivery includes:
1x PLA Basic Black Filament 1.75mm 1Kg eSun.
3. eSUN PLA BASIC 1,75mm WHITE 1kg
With the PLA Basic Filament from eSun, you get an affordable yet high-quality printing material that has been specifically optimized for fast printing speeds. The modified PLA offers improved flowability and allows for a high material throughput. Despite the high printing speed, the print quality remains consistently high, with cleanly defined edges and a smooth surface. The material is particularly easy to print, as it does not emit unpleasant odors and does not warp easily during the printing process. This means you can rely on minimal warping issues and a high success rate for your printing projects. The special formulation of the filament significantly reduces stringing, allowing you to achieve clean prints without unwanted threads. The good adhesion to the print bed and excellent layer adhesion ensure that even complex models are built stably and precisely. The eSun PLA Basic is an environmentally friendly choice, as it is made from renewable resources and is biodegradable. With a recommended printing temperature of 210-230°C, it can be processed easily on most FDM 3D printers.
Technical Data:
Manufacturer: eSun
Manufacturer SKU: PLA Basic-P175W1
Color: White
Weight: 1 kg
Diameter: 1.75 mm
Tolerance: ±0.05 mm
Density: 1.24 g/cm³
Heat resistance: 50-60°C (0.45 MPa)
Melt flow index: 3.5-4.5 g/10 min (190°C/2.16 kg)
Tensile strength: 20-30 MPa
Elongation at break: 5-10%
Flexural strength: 101.2 MPa
Flexural modulus: 3111.8 MPa
Impact toughness: 3.09 kJ/m²
Recommended printing temperature: 210-230°C (Optimal: 215°C)
Recommended heated bed temperature: 45-60°C
Recommended printing speed: 40-300 mm/s
Spool size outer diameter: 200 mm
Spool width: 64 mm
Inner diameter (hole): 55 mm
Gross weight: 1360 g
Dimensions: 198 x 198 x 60 mm
Included:
1x PLA Basic White Filament 1.75 mm 1 kg eSun.
4. eSUN eTPU-95A 1.75mm Black 1kg 3D Filament
ETPU 95A (thermoplastic polyurethane) from eSun is a flexible material, making it ideal for applications that require chemical resistance as well as the properties of rubber and plastic. Printing with TPU is not suitable for beginners and is therefore recommended only for advanced users. With TPU-95A, you can print, for example, tires for your model car, phone cases, or drone covers.
Info: Store dry and well-sealed! The material quickly absorbs moisture from the environment.
Features:
- Flexible, ideal for printing tires, seals, phone cases, or drone covers
- Very durable
- Excellent printing results and great value for money
- Good impact resistance
- Heat resistant
- Very good weather resistance
- High UV resistance
- Resistant to many chemicals and oil
Technical Details:
- Color: Black
- Item number: eTPU-95A175B1
- Filament weight: 1 kg
- Diameter: 1.75 mm
- Tolerance: ±0.05 mm
- Printing temperature: 210-240 °C
- Density: 1.12 g/cm³
- Elongation at break: 500%
- Tensile strength: 52 MPa
- Spool size outer diameter: 20 cm
- Spool width: 6.85 cm
- Inner diameter (hole): 5.3 cm
- Filament weight: 1000 g
- Empty spool weight: 278 g
- Total weight: 1460 g
- Dimensions: 205 x 215 x 75 mm.
5. eSUN PLA BASIC 1,75mm BLUE 1kg
With the PLA Basic Filament from eSun, you get an affordable yet high-quality printing material that has been specifically optimized for fast print speeds. The modified PLA offers improved flowability and allows for a high material throughput. Despite the high printing speed, the print quality remains consistently high, with cleanly defined edges and a smooth surface. The material is particularly easy to print, as it does not produce unpleasant odors and does not warp easily during the printing process. This means you can rely on minimal warping issues and a high success rate for your printing projects. The special formulation of the filament significantly reduces stringing, allowing you to achieve clean prints without unwanted threads. The good adhesion to the print bed and excellent layer adhesion ensure that even complex models are built stably and precisely. The eSun PLA Basic is an environmentally friendly choice, as it is made from renewable resources and is biodegradable. With a recommended printing temperature of 210-230°C, it can be processed easily on most FDM 3D printers.
Technical Data:
Manufacturer: eSun
Manufacturer SKU: PLA Basic-P175U1
Color: Blue
Weight: 1Kg
Diameter: 1.75mm
Tolerance: ±0.05mm
Density: 1.24 g/cm³
Heat resistance: 50-60°C (0.45 MPa)
Melt flow index: 3.5-4.5 g/10min (190°C/2.16kg)
Tensile strength: 20-30 MPa
Elongation at break: 5-10%
Flexural strength: 101.2 MPa
Flexural modulus: 3111.8 MPa
Impact toughness: 3.09 kJ/m²
Recommended printing temperature: 210-230°C (Optimal: 215°C)
Recommended heated bed temperature: 45-60°C
Recommended printing speed: 40-300 mm/s
Spool size outer diameter: 200mm
Spool width: 64mm
Inner diameter (hole): 55mm
Gross weight: 1360g
Dimensions: 198 x 198 x 60mm
Delivery includes:
1x PLA Basic Blue Filament 1.75mm 1Kg eSun.
6. eSUN PLA+ Filament 1.75mm White 1Kg
PLA Plus White PLA+175W1 from eSun is based on standard PLA filament. eSUN PLA+ is not only easier to process but also allows for the production of better 3D printed parts with smooth and clean surfaces. In conclusion, PLA+ is very suitable for both beginners and professionals, is easy to print, and offers good adhesion properties with almost no warping effect during printing. PLA+ is also an excellent alternative to ABS when impact resistance is required, such as for printed children's toys. PLA+ has very good elongation and bending strength to withstand drops, impacts, and breaks due to stretching. There are no odors produced when printing with PLA+, unlike with ABS.
7. eSUN PETG 1.75mm Solid Silver 1kg 3D Filament
The eSUN PETG 1.75mm Solid Silver 1kg 3D Filament is a high-quality printing material that stands out due to its excellent properties. PETG (Polyethylene Terephthalate Glycol) offers superior durability and robustness compared to other common filaments like ABS or PLA. It is particularly impact-resistant and minimises the risk of deformation during the printing process, making it an ideal choice for both beginners and experienced users. The easy handling and excellent layer adhesion ensure consistent printing results. Furthermore, PETG is odourless, which makes the printing process more pleasant. With a range of advantages, including water resistance and high UV stability, this filament is versatile and suitable for applications in humid environments, such as aquariums. The combination of toughness and chemical resistance makes it an excellent alternative to ABS.
- High impact resistance and toughness, ideal for robust applications
- Low shrinkage rate and minimal warping during printing
- Water-resistant, suitable for aquariums with 100% infill
- Optimal layer adhesion for improved print quality
- Heat-resistant and resistant to many chemicals and oils
- Flame-retardant, building material class B1.
3D printer filament
CHF17.90
eSUN PETG 1.75mm Solid Silver 1kg 3D Filament
PETG, 1.75 mm, 1000 g, Silver
8. eSUN PLA BASIC 1,75mm LIGHT BLUE 1kg
With the PLA Basic Filament from eSun, you get an affordable yet high-quality printing material that has been specifically optimized for fast print speeds. The modified PLA offers improved flowability and allows for a high material throughput. Despite the high printing speed, the print quality remains consistently high, with cleanly defined edges and a smooth surface. The material is particularly easy to print, as it does not emit unpleasant odors and does not warp easily during the printing process. This means you can rely on minimal warping issues and a high success rate for your printing projects. The special formulation of the filament significantly reduces stringing, allowing you to achieve clean prints without unwanted threads. The good adhesion to the print bed and excellent layer adhesion ensure that even complex models are built stably and precisely. The eSun PLA Basic is an environmentally friendly choice, as it is made from renewable resources and is biodegradable. With a recommended printing temperature of 210-230°C, it can be easily processed on most FDM 3D printers.
Technical Data:
Manufacturer: eSun
Manufacturer SKU: PLA Basic-P175D1
Color: Light Blue
Weight: 1Kg
Diameter: 1.75mm
Tolerance: ±0.05mm
Density: 1.24 g/cm³
Heat resistance: 50-60°C (0.45 MPa)
Melt flow index: 3.5-4.5 g/10min (190°C/2.16kg)
Tensile strength: 20-30 MPa
Elongation at break: 5-10%
Flexural strength: 101.2 MPa
Flexural modulus: 3111.8 MPa
Impact toughness: 3.09 kJ/m²
Recommended printing temperature: 210-230°C (Optimal: 215°C)
Recommended heated bed temperature: 45-60°C
Recommended printing speed: 40-300 mm/s
Spool size outer diameter: 200mm
Spool width: 64mm
Inner diameter (hole): 55mm
Gross weight: 1360g
Dimensions: 198 x 198 x 60mm
Delivery includes:
1x PLA Basic Light Blue Filament 1.75mm 1Kg eSun.
9. eSUN PLA+ 1.75mm Black 1Kg
PLA Plus black PLA+175B1 from eSun is based on a standard PLA filament. The following properties have been optimized: brittleness, impact resistance, layer adhesion, flame retardancy, and odor neutrality during printing. eSUN PLA+ is considered by many to be the new standard for PLA printing and offers a very good price-performance ratio. It is not only easier to process, but you also produce better 3D printed parts with smooth and clean surfaces.
In conclusion: PLA+ is very suitable for beginners and professionals alike, is easy to print, and offers good adhesion properties with almost no warping effect during printing. PLA+ is also a very good alternative to ABS when something needs to be impact-resistant, such as printed children's toys. PLA+ has excellent elongation and bending strength to withstand drops, impacts, and breaks due to stretching. Additionally, printing with PLA+ does not produce odors, unlike ABS.
10. eSUN Epla+Hs
The ePLA-HS from eSUN is a high-quality PLA filament with high conformability that has been specially developed for high-speed printing. When melted, the material ensures uniform flow behaviour without clogging and cools faster without deforming. With high-speed ePLA, you can achieve a better print surface quality and a higher level of detail.
