Best Magigoo products in the 3D printer accessories category
On this page you'll find a ranking of the best Magigoo products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Magigoo 3D glue stick
Magigoo 3D glue stick is a simple method of print bed coating for use with PLA and ABS filaments. Magigoo is applied to the printing platform before printing to ensure warp-free adhesion of the 3D print model. Once the printing platform has cooled down, the 3D model can be removed without much effort and the adhesive can simply be washed off with water. The Magigoo glue stick lasts for over 100 prints. Magigoo is suitable for printing PLA, PETG and ABS filaments. Recommended print bed temperature approx. 40°C.
2. Magigoo Pro 3D glue stick for PA filaments 50ml
Magigoo is the magic glue stick for your 3D printing In 3D printing, the adhesion of the first layer is the biggest challenge, especially with materials such as ABS. Once the first layer adheres perfectly to the printing plate, the rest of the print becomes a minor matter. Magigoo is an easy-to-use glue stick that ensures that the first layer adheres perfectly to the printing plate. But the magic only begins when the print is finished, because when the 3D print has cooled down, it can be easily removed from the printing plate. Magigoo also prevents the notorious warping of larger objects, especially at the edges of the printing plate.
3. Magigoo Supergrip - 50 ml
Developed for flexible surfaces. Unlike conventional adhesives, Magigoo Supergrip has been specifically designed for flexible and polymer-based surfaces. Thanks to its unique formulation, it spreads evenly and adheres to both smooth and textured coatings without flaking or degrading over time.
Wide filament compatibility. Whether you are using standard materials like PLA and PET-G or more demanding materials like ABS/ASA and TPU, Supergrip delivers consistent performance. It even enables successful PLA prints at bed temperatures as low as 45 degrees Celsius.
Durable and cost-effective. With a single application, over 250 full bed prints can be covered without a decline in effectiveness. This not only saves time but also reduces the cost per print.
Effortless removal and easy maintenance. After printing, parts can be easily removed once the build plate has cooled down—just flex the plate. Cleaning is just as simple: wipe off the adhesive with a damp cloth and reapply. No harsh chemicals are required.
Protects your build surface. Supergrip creates a protective buffer between your print and the plate, helping to extend the lifespan of your print surface by reducing wear.
4. Magigoo Pro 3D Glue Stick for Ultrafuse 316L Filament
Why: BASF Ultrafuse 316L enables the production of solid parts made from 316L stainless steel using desktop FDM 3D printers and a sintering process. Ultrafuse 316L filament consists of highly refined metal particles embedded in thermoplastic binders. As a filament, this metal-polymer composite material does not carry the handling and safety risks associated with fine metal powders. This allows for affordable, straightforward, and safe 3D printing of stainless steel parts. Due to the thermoplastic nature of the filament binders and the varying thermal cooling during FDM printing, parts printed with BASF Ultrafuse 316L are prone to deformation. Care must be taken when removing parts printed with BASF Ultrafuse 316L to avoid deforming the part because of the delicate nature of the green part. Magigoo Metal provides secure and reliable adhesion during printing and allows for easy removal of the printed part by soaking it in water, preventing potential damage to the green part. How: For using Magigoo Metal with BASF Ultrafuse 316L, a build plate temperature of 95-105 °C is recommended, though printing conditions may vary from one printer to another. Shake the bottle. Apply to the desired area by pressing the nozzle onto the bed (activating the internal valve) and spreading as needed. Print according to the recommendations of the filament/printer manufacturer. After printing: Submerge the entire build plate in water or soak the part in water. After a short time—typically 30 minutes to 2 hours, depending on the size of the part—the part should detach on its own or be easily removable with a gentle twist. Clean up residues—wipe away any remaining residue with a cloth.
5. Magigoo 3D glue stick for PP-GF filaments 50ml
The new Magigoo 3D glue stick for polypropylene filaments with 30% glass fiber reinforcement ensures optimal adhesion of PP-GF filaments to the print bed and allows for easy removal after cooling. In the adhesive industry, it is known that bonding polypropylene materials with other types of materials is challenging. Magigoo for PP-GF filaments addresses this issue and provides added convenience for FDM 3D printing.
6. Magigoo Glide Original - 250 ml
7. Magigoo 3D Glue Stick Pro Kit for ABS, PA, PC, PP
These adhesives ensure that prints adhere well while the plate is hot and are easy to remove once the plate has cooled. Furthermore, it is easy to clean the adhesive residues.
Contents:
Magigoo PA has been developed for professional use exclusively with polyamide filaments. It is designed and tested for a wide range of PA (nylon) and fiber reinforced filament brands. Magigoo PC was developed for use exclusively with polycarbonate filaments and fiber-reinforced variants. Magigoo PP is designed for use exclusively with polypropylene filaments.
Magigoo ABS was developed for general use with a wide variety of common filaments. It is ideally suited for ABS, PLA, HIPS, PETG, TPU and similar filament types.
Safety Instructions:
These products are designed for professional use. Please read the application instructions thoroughly before use.
Using the wrong type of filament with the wrong Magigoo adhesive may result in excessive adhesion and cause damage to your print bed. Some adhesives may contain corrosion and eye irritation causing substances. Wash your hands after use. The Magigoo bottles have a spring-loaded cap. To open the bottle, you must press the cap onto the pressure plate. If you squeeze the sides of the bottle, the front cap may pop out. Please never squeeze the bottle at the sides.
8. Magigoo Glide Kit
Precise adhesive application. The innovative Glide Roller ensures an even and controlled distribution of glue across the entire build plate in seconds, replacing inaccurate manual methods like pens, spatulas, or brushes. It is designed for speed, reliability, and uniform coverage, thus preventing adhesion errors due to over- or under-dosing.
Designed for large-scale and large-format printing. Whether in a print farm or with large-format printers, the Glide Kit significantly speeds up preparation. One bottle is sufficient for over 1200 applications on a standard plate (235 × 235 mm) – more than 70% more efficient than conventional glues – saving time and costs.
Complete starter set. Everything you need is included: Magigoo Original glue (compatible with PLA, ABS, PETG, TPU, etc.), the Glide Roller, and a lint-free cleaning cloth for clean tools and print surfaces. Ideal for effortless setup and maintenance.
Safe, user-friendly, and economical. Magigoo Original is water-based, non-toxic, and completely odorless – perfect for home, school, or workshop. It can be rinsed off with warm water, without solvents or scraping – for clean, easy reuse.
9. Magigoo 3D glue stick for PC filaments 50ml
The Magigoo 3D glue stick guarantees a strong adhesion of the object even on a hot print bed and allows for easy removal after cooling. No additional tools are required to detach the object from the print bed. This glue stick is specifically designed for use with polycarbonate materials, making it perfectly suited to ensure optimal adhesion to the print bed.
10. Magigoo Pro 3D glue stick for HT filaments
Magigoo is the magic glue stick for your 3D printing In 3D printing, the adhesion of the first layer is the biggest challenge, especially with materials such as ABS. Once the first layer adheres perfectly to the printing plate, the rest of the print becomes a minor matter. Magigoo is an easy-to-use glue stick that ensures that the first layer adheres perfectly to the printing plate. But the magic only begins when the print is finished, because when the 3D print has cooled down, it can be easily removed from the printing plate. Magigoo also prevents the notorious warping of larger objects, especially at the edges of the printing plate.
