Best E3D Online products in the 3D printer accessories category

On this page you'll find a ranking of the best E3D Online products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.

1. E3D Online E3D Silicone Socks for Volcano 3-Pack

Silicone Socks for Volcano

Silicone volcano socks provide a significant increase in temperature stability, which is especially important when the nozzle is cooled with a high airflow to cool the block. The additional cooling, combined with reduced heat radiation from the block to the print, enhances the ability to print large overhangs and bridges while keeping the temperature of the hotend extremely stable. Made from inherently non-stick high-temperature silicone, these socks help keep your nozzles and blocks free from plastic residue. We supply the socks in a pack of three, as, although they are designed to be as durable as possible, they will eventually wear out or degrade. Depending on the temperatures used and the materials you print with, you will achieve different results. 

E3D Online E3D Silicone Socks for Volcano 3-Pack
3D printer accessories
−30%
only 1 piece on sale
CHF3.80 was CHF5.40

E3D Online E3D Silicone Socks for Volcano 3-Pack

2. E3D Online E3D High Flow HTA Complete HotEnd For Bambu Lab X1E

E3D DiamondBack HotEnd for Bambu Lab X1E

E3D is proud to be the only officially approved manufacturer of aftermarket Bambu Lab HotEnds. These high flow HTA (high temperature abrasive resistant) HotEnds were developed in collaboration with Bambu Lab. They are professional HotEnds for professional applications, designed to improve the efficiency of your X1E and enhance the finish of your prints with a simple upgrade.

High Flow

The Bambu Lab X1E printer is built for speed, and while its motion system is remarkable, there is potential for even better performance. E3D's high flow technology increases the volumetric flow rate of the HotEnd by 60%. This means you can expect more reliable and consistent extrusion at the same speeds or increase the volumetric flow rate limit in your slicer to fully utilize the motion system's capabilities.

Hard and Hot

These HotEnds are coated with chromium nitride to provide additional abrasive resistance and corrosion prevention properties up to 320°C. They are perfect for printing engineering-grade materials such as PPA-CF and PPS-CF at faster print speeds. Alternatively, you can maintain your stock profiles and experience improved interlayer adhesion.

Improved Layer Adhesion

High-speed printing often sacrifices visual and functional aspects for speed, but these HotEnds maintain interlayer adhesion strength even at higher speeds, resulting in the correct filament finish and strong parts for functional applications.

No Compromise

These HotEnds are a drop-in replacement for your stock X1E HotEnd, requiring no adjustments to the mount or part cooling. You can complete the upgrade in under 5 minutes with our installation video guide.

Compatibility

This HotEnd is only for use with Bambu Lab X1E.

Supported Filaments:
- Optimal: PLA, PETG, TPU, PVA, BVOH
- Superior: ABS, ASA, PC. 

3. E3D Online E3D DiamondBack HotEnd for Bambu Lab X1 Series

E3D DiamondBack HotEnd for Bambu Lab X1 Series

These premium HotEnds are an official collaboration between E3D, DiamondBack, and Bambu Lab, bringing you the most extreme HotEnd solution to date. The rapid development of fiber, metal, and ceramic filaments has increased the need for abrasion-resistant nozzles. Compared with all the nozzle options on the market, DiamondBack's diamonds deliver unmatched wear resistance and versatility.

Smooth and Hard

Unlock extreme wear resistance on your Bambu Lab printer thanks to DiamondBack’s Polycrystalline Diamond (PCD) tips. These diamonds are composed of thousands of tiny diamond crystals with a proprietary binder that forms a matrix of crystals joined with diamond-to-diamond bonds. They retain the hardness properties of diamond while reducing the inherent brittleness of a single-crystal diamond, making them a fantastic choice for printing with engineering-grade metal and ceramic-filled filaments.

Precision Printing

DiamondBack nozzles rely on a solid diamond tip to improve precision 3D printing. The tip is not a diamond coating, but rather a solid diamond insert made from the hardest material in the world.

Longevity

The PCD used in these Bambu Lab HotEnds significantly extends nozzle life. It provides best-in-class thermal conductivity, which improves interlayer adhesion for stronger prints, and the low coefficient of friction combined with a polished tip creates super smooth top layers with an ironing-like effect.

Effortless Upgrade

These HotEnds are a drop-in replacement for your stock Bambu Lab HotEnd; no adjustment to the mount or part cooling is required. Maintain your stock Bambu Lab print profiles as they’re a perfect match.

Compatibility

Compatible with Bambu Lab X1-Series. Upgrade to these cutting-edge HotEnds for a superior 3D printing experience with unmatched performance and durability. 

4. E3D Online E3D Prusa MK4/XL - Brass Nozzle for Nextruder

E3D Prusa Nozzle for MK4/XLThese high-quality 3D printing nozzles are designed specifically for use with Prusas latest extruder – Nextruder. Compatible with Prusas MK4 and XL 3D printers, they feature an all-metal filament guide which means that Nextruders filament path is entirely metal. This helps improve overall printer reliability and enables speedier nozzle changing.Simplified nozzle changingChanging a nozzle on your Prusa printer just got much easier! Waste less time changing your nozzles and more time experimenting with different sizes and materials.Easy identificationEach Nozzle has its size engraved into it.What’s in the box:1 x 0.4mm OR 0.6mm Brass Prusa Nozzle How to change your Genuine E3D Prusa Nozzle. 

5. E3D Online E3D DiamondBack Volcano Nozzle

E3D DiamondBack Volcano Nozzle

The Diamondback Science team has been developing top-notch diamond products for the energy industry for over 40 years. Team members have recently created a proprietary polycrystalline diamond nozzle (PCD) for 3D printing that can handle even the most demanding applications. It is easier to clean, reduces tip clogging, improves layer adhesion, features a solid diamond tip, is compatible with any filament, has a longer lifespan, lowers operating temperature, and offers unmatched wear resistance.

Precision Printing

E3D nozzles are based on a solid diamond tip to enhance the precision of 3D printing. The tip is not a diamond coating but a solid diamond substrate made from polycrystalline diamond. Diamond is not only the hardest material in the world but also offers class-leading thermal conductivity. It transfers heat from the hotend through the nozzle into the filament, ensuring more precise printing and better layer adhesion with every print.

Every Filament

Diamondback is based on proprietary and patented diamond technology. This groundbreaking technology allows 3D printers to print every filament with the same nozzle. A DiamondBack nozzle can easily print standard PLA and ABS filaments as well as highly abrasive carbon fiber embedded filaments without the need to worry about changing the nozzle. It also enables 3D printing with PLA-Copper, Iron, and Carbon Fiber.

Longer Lifespan

The polycrystalline diamond (PCD) used in every DiamondBack nozzle significantly extends the overall lifespan of the nozzle. The extreme hardness, wear resistance, and thermal conductivity of this unique material make it an ideal solution for 3D printing. 

6. E3D Online E3D Revo HTX Nozzle

Revo HTX Nozzle HTX nozzles are high-temperature, abrasion-resistant nozzles. Much like ObXidian, HTX nozzles have a hardened steel tip, copper carrier and copper spreader segment to optimise the transmission of heat to the heatsink. The nozzle is then coated with Chromium Nitride to provide abrasive resistance up to 500°C. Frustration-free Each Revo Nozzle is a preassembled nozzle and HeatBreak in one unit, so there’s no hazardous hot tightening and no chance of incorrect assembly. Say goodbye to frustrating HotEnd leaks and enjoy reliable 3D printing! Rapid identification HTX nozzles are grey in colour and have their sizes engraved into them with easy-to-read numbers, so there are no confusing identification markers to learn!. 

7. E3D Online E3D DiamondBack V6 Nozzle

E3D DiamondBack V6 Nozzle

The Diamondback Science team has been developing top-notch diamond products for the energy industry for over 40 years. Recently, team members created a proprietary polycrystalline diamond nozzle (PCD) for 3D printing that can handle even the most demanding applications. It is easier to clean, reduces tip clogging, improves layer adhesion, features a solid diamond tip, is compatible with any filaments, has a longer lifespan, lowers operating temperature, and offers unmatched wear resistance.

Precision Printing

E3D nozzles are based on a solid diamond tip to enhance the precision of 3D printing. The tip is not a diamond coating but a solid diamond substrate made of polycrystalline diamond. Diamond is not only the hardest material in the world but also offers class-leading thermal conductivity. It transfers heat from the hotend through the nozzle into the filament, resulting in more precise printing and better layer adhesion with every print.

Every Filament

Diamondback is based on proprietary and patented diamond technology. This groundbreaking technology allows 3D printers to print any filament with the same nozzle. A DiamondBack nozzle can easily print standard PLA and ABS filaments as well as highly abrasive carbon fiber embedded filaments without the need to worry about changing the nozzle. Additionally, it enables 3D printing with PLA-Copper, Iron, and Carbon Fiber.

Longer Lifespan

The polycrystalline diamond (PCD) used in every DiamondBack nozzle significantly extends the overall lifespan of the nozzle. The extreme hardness, wear resistance, and thermal conductivity of this unique material make it an ideal solution for 3D printing. 

8. E3D Online E3D RapidChange Revo™ Brass 1.75mm 0.4mm Nozzle

Experiment freely with changing nozzles. You can easily try out different nozzle sizes that you may not have used before. Set up your 3D printer in no time for ultra-fine or ultra-thick extrusion widths. Print large objects faster or create tiny objects with high resolution.

Enjoy a frustration-free operation. Each Revo nozzle is a pre-assembled nozzle and heat break in one unit, eliminating the risk of dangerous hot tightening and the danger of incorrect assembly. Say goodbye to frustrating hotend leaks and enjoy reliable 3D printing.

Identify nozzle sizes at a glance with a color-coded silicone sock. Each Revo nozzle also has its size engraved with easily readable numbers, so there are no confusing identification markings to learn.

A growing range of options is available. We are ready to manufacture RapidChange nozzles in any size. To start, we are introducing brass nozzles in 0.25 mm, 0.4 mm, 0.6 mm, and 0.8 mm, with many more compatible nozzles to follow. Wear-resistant and high-flow variants are already on our roadmap and will be released over time.

Please note:

Revo nozzles are not compatible with V6-style heat blocks.

You may need to adjust the Z-offset when changing nozzles. 

9. E3D Online E3D V6 Nozzle X 0,8 mm - 1,75 mm - 1 pcs

Nozzle X is the last nozzle your 3D printer will ever need. It is made from hardened tool steel, then nickel-plated to maintain its hardness at high temperatures, and coated with WS2 to give the nozzle reduced adhesion properties. Nozzle X is designed for a maximum temperature of 500 °C and can print any printable material, from PLA to carbon fiber-filled PEEK, without wearing out.

Please note

The V6 nozzles are not compatible with the Volcano, SuperVolcano, or Cyclops heating blocks. 

10. E3D Online E3D DiamondBack Ultimaker S-line Compatible Nozzle

DiamondBack Ultimaker S-line Compatible Nozzle

The DiamondBack Science team has been developing world-class diamond products for the energy industry for more than 40 years. Members of the team recently developed a proprietary polycrystalline diamond (PCD) nozzle for use in 3D printing that can handle the most challenging applications. It is easier to clean, reduces tip clogging, improves layer adhesion, features a solid diamond tip, works with any filaments, has a longer life, lowers operating temperature, and delivers unmatched wear resistance.

Precision print DiamondBack nozzles rely on a solid diamond tip to enhance precision in 3D printing. The tip is not a diamond coating, but rather a solid diamond substrate made of polycrystalline diamond. Not only is diamond the hardest material in the world, but it also provides best-in-class thermal conductivity, ensuring effective heat transfer from the hotend through the nozzle and into the filament, which results in more precise printing and better layer adhesion on every print.

Any filament DiamondBack utilises proprietary and patented diamond technology. This breakthrough technology allows 3D printers to print any filament using the same nozzle. A DiamondBack nozzle can easily print standard PLA and ABS filaments as well as highly abrasive carbon fibre-embedded filaments without the need to change the nozzle. It also supports 3D printing with PLA Copper, Iron, and Carbon Fibre.

Longer life The polycrystalline diamond (PCD) used in every DiamondBack nozzle significantly extends the overall life of the nozzle. The extreme hardness, wear resistance, and thermal conductivity of this unique material make it an ideal solution for 3D printing. It delivers high thermal conductivity, a low coefficient of friction, and high fracture toughness, extending the tool life of applications in other industries by two to eight times compared to tungsten carbide and other hard metals.

Specifications It is recommended that DiamondBack nozzle users... 

See all products