A camera lens (also known as photographic lens, objective lens or photographic objective) is an optical lens or assembly of lenses used in conjunction with a camera body and mechanism to make images of objects either on photographic film or on other media capable of storing an image chemically or electronically. While in principle a simple convex lens will suffice, in practice a compound lens made up of a number of optical lens elements is required to correct (as much as possible) the many optical aberrations that arise. Some aberrations will be present in any lens system. It is the job of the lens designer to balance these out and produce a design that is suitable for photographic use and possibly mass production. A lens may be permanently fixed to a camera, or it may be interchangeable with lenses of different focal lengths, apertures, and other properties.
In photography and cinematography, a wide-angle lens refers to a lens whose focal length is substantially smaller than the focal length of a normal lens for a given film plane. This type of lens allows more of the scene to be included in the photograph, which is useful in architectural, interior and landscape photography where the photographer may not be able to move farther from the scene to photograph it.
In film and photography, a prime lens is either a photographic lens whose focal length is fixed, as opposed to a zoom lens, or it is the primary lens in a combination lens system.
A lens mount is an interface — mechanical and often also electrical — between a photographic camera body and a lens. It is confined to cameras where the body allows interchangeable lenses, most usually the single lens reflex type or any movie camera of 16 mm or higher gauge. Lens mounts are also used to connect optical components in instrumentation that may not involve a camera, such as the modular components used in optical laboratory prototyping which join via C-mount or T-mount elements.
The focal length of an optical system is a measure of how strongly it converges (focuses) or diverges (diffuses) light. A system with a shorter focal length has greater optical power than one with a long focal length.
In photography, the 35 mm equivalent focal length is a measure that indicates the angle of view of a particular combination of a camera lens and film or sensor size. The term is useful because most photographers experienced with interchangeable lenses are most familiar with the 35 mm film format.
Als Filtergewinde bezeichnet man ein Anschlussgewinde von Foto- und Video-Objektiven zur Aufnahme von optischen Filtern. Dieses Gewinde befindet sich meist an der Vorderseites kurz vor der Frontlinse. Für die Aufnahme von Streulichtblenden haben die meisten Objektive einen separaten Anschluss.
Gibt an, in wie viele Gruppen die Linsen aufgeteilt sind.
12
Fixed front lens
Yes
Internal focusing
i
Internal focusing
Innenfokussierung, abgekürzt IF, ist eine Konstruktionsart von Objektiven, bei der die Entfernungseinstellung nicht durch eine Verschiebung des ganzen Objektivs, sondern nur von einer oder mehreren Linsen innerhalb des Objektivs erfolgt. Die übrigen Linsen, insbesondere die Frontlinse, behalten ihren Abstand von der Bildauffangebene (Fadennetz, Film oder Bildsensor) bei, wodurch sich die Baulänge des Objektivs nicht ändert.
In geometrical optics, a focus, also called an image point, is the point where light rays originating from a point on the object converge. Although the focus is conceptually a point, physically the focus has a spatial extent, called the blur circle. This non-ideal focusing may be caused by aberrations of the imaging optics. In the absence of significant aberrations, the smallest possible blur circle is the Airy disc, which is caused by diffraction from the optical system's aperture. Aberrations tend to get worse as the aperture diameter increases, while the Airy circle is smallest for large apertures.
Es besteht die Möglichkeit manuell zu fokussieren. Der Autofokus wird somit nicht verwendet.
Yes
Minimum focus distance
i
Minimum focus distance
Die kürzeste Distanz welche unterstützt wird.
25 cm
Diaphgragm properties
i
Diaphgragm properties
In optics, a diaphragm is a thin opaque structure with an opening (aperture) at its center. The role of the diaphragm is to stop the passage of light, except for the light passing through the aperture.
In optics, an aperture is a hole or an opening through which light travels. More specifically, the aperture of an optical system is the opening that determines the cone angle of a bundle of rays that come to a focus in the image plane. The aperture determines how collimated the admitted rays are, which is of great importance for the appearance at the image plane. If an aperture is narrow, then highly collimated rays are admitted, resulting in a sharp focus at the image plane. If an aperture is wide, then uncollimated rays are admitted, resulting in a sharp focus only for rays with a certain focal length. This means that a wide aperture results in an image that is sharp around what the lens is focusing on and blurred otherwise. The aperture also determines how many of the incoming rays are actually admitted and thus how much light reaches the image plane (the narrower the aperture, the darker the image for a given exposure time).
In optics, an aperture is a hole or an opening through which light travels. More specifically, the aperture of an optical system is the opening that determines the cone angle of a bundle of rays that come to a focus in the image plane. The aperture determines how collimated the admitted rays are, which is of great importance for the appearance at the image plane. If an aperture is narrow, then highly collimated rays are admitted, resulting in a sharp focus at the image plane. If an aperture is wide, then uncollimated rays are admitted, resulting in a sharp focus only for rays with a certain focal length. This means that a wide aperture results in an image that is sharp around what the lens is focusing on and blurred otherwise. The aperture also determines how many of the incoming rays are actually admitted and thus how much light reaches the image plane (the narrower the aperture, the darker the image for a given exposure time).
Das Gerät funktioniert auch, wenn es mit Staub in Kontakt kommt.
Delivery contents
i
Delivery contents
The scope of delivery means the included accessories.
Lens hood
i
Lens hood
In photography, a lens hood or lens shade is a device used on the end of a lens to block the sun or other light source in order to prevent glare and lens flare.
This product may be returned within 30 days after shipment or collection. A minimum of 10% will be deducted from opened products. Unfortunately, we cannot accept a product if it is damaged, incomplete or missing its original packaging.
Warranty and return
Please use our simplified returns and warranty process to return a product or register a warranty case.
Returns and warranty
Please use our simplified warranty process to view the warranty period as well as any warranty extensions you may have purchased. This will ensure that your return or warranty case is processed quickly and effectively.
Insure your device against drop, impact, breakage and display damage as well as against damage caused by water or damp. Improper use (call and data misuse) due to theft is also covered. With each purchase you accept the general terms and conditions.
