Xavax LED filament, E27, 806lm replaces 60W, incandescent, warm white, matte, RA90, dim.

This particularly energy-efficient bulb has a power consumption of only 6.5 watts and a high color rendering of Ra90. It is dimmable and features very low energy consumption with low heat generation and no UV radiation. The bulb provides immediate full light output after switching on and is easy to replace with conventional incandescent lamps.

Consumer notice: The LED lamp is designed for operation in open luminaires, allowing heat dissipation to the surroundings. The predicted lifetime assumes this mode of operation, and using it in closed luminaires may reduce its lifespan due to lack of cooling. Use only in luminaires designed for this purpose. Before replacing the lamp, allow it to cool down completely and switch off the mains voltage. Replace damaged lamps immediately. There is no liability for improper use.

With some dimmers, lamp functions may be impaired, resulting in flickering or noise. Mixed operation, which involves the simultaneous use of LED lamps and standard incandescent lamps or different types of LED lamps on one dimming line, is not possible. If noise occurs in dimmers that is not present with incandescent lamps, the dimmer may not be suitable for LED lamps. Cord dimmers require a separate on/off switch, as they may not regulate completely to zero.

Observe the minimum load of the dimmer; otherwise, it may not start or regulate incorrectly. Simple dimmers typically work from 60W to 400W. For recessed dimmers with a basic brightness setting, this must be set high enough; otherwise, the LED lamp may not start. Dim slowly and evenly, avoiding jerky or fast adjustments. Only incandescent lamp dimmers are allowed; dimmers for transformers are not suitable. Touch dimmers are usually not appropriate, and using an incorrect dimmer can permanently damage the lamp.