Xavax LED filament

Particularly energy-efficient light source with a power consumption of just 2 watts. High colour rendering of Ra90. Dimmable. Decorative candle shape. Particularly suitable for continuous lighting applications where very long switch-on times are required, e.g. practice rooms, vestibules, chandeliers. Pleasant warm white light colour for general lighting tasks. For indoor and outdoor applications. Consumer information: The LED lamp has been developed for operation in open luminaires so that the heat generated by the light source can be dissipated into the surroundings. The service life forecast is based on this mode of operation. The service life is reduced by insufficient cooling when used in closed luminaires. Use only in luminaires intended for this purpose. Allow the light source to cool down completely before replacing and switch off the mains voltage. Replace damaged lamps immediately. No liability for improper use. With some dimmers, lamp functions may be impaired (flickering, noise). Mixed operation, i.e. simultaneous operation of LED lamps and standard incandescent lamps or LED lamps of different types in one dimming line is not possible. Noises in dimmers that were not noticed with incandescent lamps: Dimmer is not suitable for LED lamps. Cord dimmers (dimmers built into the power cable) require a separate on/off switch, as they may not regulate completely to 0. Observe the minimum load of the dimmer, otherwise it may not switch on or regulate incorrectly. Simple dimmers usually work from 60W to 400W. For recessed dimmers with a basic brightness setting, this must be set high enough, otherwise the LED lamp may not switch on. Dim slowly and evenly. Not jerkily or quickly. Only incandescent lamp dimmers are permitted - no dimmers for transformers etc. Touch dimmers are usually not suitable. The wrong dimmer can permanently damage the lamp.