Wella Akku AA Contura HS40, HS61

AccuCell NiMH battery 2100mAh, also compatible with Wella Contura HS40 and HS61 (not an original battery).

Replacement battery compatible with GP180AAH, Bella Ermila Type 1590 B, Wella Contura HS40 and HS61.

• Battery, single cell with 2 connector contacts.
• Also suitable as a replacement battery for Wella Contura HS40 and HS61.
• Also compatible with the 2 pieces Moser 1881c battery 1852, 1530, 1881, 1881C Trend Cut, Type ProfiLine, Bella, 1590, 1590B, 1590C, 1591, 1591B, 1591C, 1592, Moser Chromini battery.
• Industrial design, high capacity, very good performance, high voltage, long endurance.
• Please check the required number of batteries and the battery dimensions (approx. 50.5 x 14.5 mm) in the device before ordering.

These powerful accumulators are professionally assembled to the highest possible standard and are aimed at the model building market, where quality and value for money play a very significant role.

Applications: Battery pack, e.g., for hair clippers and similar devices.

Technical specifications:

• System: NiMH battery 1600mAh to 2100mAh AA with connector contacts
• Voltage: 1.2 volts
• Capacity: min. 1600mAh, max. 2100mAh
• Dimensions (DxH): 50.5 x 14.5 mm
• Weight: 23 grams

Installation tip: For the Wella HS40, loosen the hex screw on the cutting head and carefully remove the black on/off switch. Under the sliding switch, two black retaining tabs will appear on the left and right sides of the housing. Carefully press these two retaining tabs into the housing, and then the internal components should be able to slide out. On the inner back side, you will see the battery with the connector contacts. Please gently push the old battery out of the circuit board (you may use a small screwdriver as a lifting aid). Remember the positive and negative terminals beforehand!.